Professional Documents
Culture Documents
ANDRAGOGY Form 6 Session Plan
ANDRAGOGY Form 6 Session Plan
Learning Outcomes:
LO1. Prepare Materials, Tools and Equipment
LO2. Lay-Out and Cut Dimension of Form Sheating and Stiffeners
LO3. Assemble and Erect Form Panels and Components
LO4. Erect Wooden Scaffolds
LO5. Strip Form Panels and Dismantle Scaffold
LO6. Clean and Store Reusable Form Panels and Components
A. Introduction:
This unit covers the knowledge, skills, and attitudes to fabricate, install and remove wooden formworks.
B. Learning Activities
LO1. Prepare Materials, Tools and Equipment
Assessment Criteria
1.1 Personal protective equipment (PPE) is used in accordance with Rule 1080 of Occupational Safety and Health
Standards.
1.2 List of materials, hand tools and equipment are secured and followed according to job requirements
1.3 Materials, tools and equipment are selected, inspected and prepared consistent with job requirements.
1.4 Work area is cleaned according to safety and environmental regulations (e.g. PD 1152 Section 6, 8 & 42).
1.5 Required output is completed as specified by the immediate supervisor based on work schedule.
Learning Content Methods Presentation Practice Feedback Resources Time
1. Personal Protective Self-Study Read Information Answer Sheet Compare the Information Sheet 1hr
Equipment(PPE) and Sheet. 2.1-1 on 2.1-1 Answer to the No. 2.1-1 of
Safety and Health form design Answer Key CBLM
Standards(OHS). 2.1-1
Valenzuela City Technological College
Kamagong St., Fortune VI, Parada, Valenzuela City
Adjustable
Wrench, P.P.E.
LO3. Assemble and Erect Form Panels and Components
Assessment Criteria
3.1 Personal protective equipment (PPE) is used in accordance with Rule 1080 of Occupational Safety and Health Standards.
3.2 Sheating are positioned and fixed to stiffeners.
3.3 Assembled form panels are checked for squareness, levelness, plumbness and alignment.
3.4 Primary and secondary supports are positioned and fixed to hold assembled form panels as per drawings.
3.5 Assembled form panels are checked for compliance with job requirements.
3.6 Work area is cleaned according to safety and environmental regulations.
3.7 Required output is completed as specified by the immediate supervisor based on work schedule.
1. Assembling Form Self-Study Read Information Answer Sheet Compare the Information Sheet 1hr
Panels and Stiffeners Sheet. 2.1-3 on 2.1-3 Answer to the No. 2.1-3 of
how to assemble Answer Key CBLM
form panels and 2.1-3
stiffener
Video View the video Answer the Oral Answer the Projector, Laptop, 1hr
Presentation presentation on Questioning Oral Speaker
how to assemble Questioning
form panels and Correctly
stiffener
Demonstration Observe the Perform the Job Compare the Lumber, Plywood, 3hr
trainee’s Sheet 2.1-3 Job Sheet 2.1- Nails, G.I. Wire,
demonstration on 3 to the Chalk line, Pencil,
how to assemble Performance Claw Hammer,
form panels and Criteria Sledge Hammer,
stiffener Checklist Level Hose/Level
Bar, Steel Tape,
Nylon String,
Valenzuela City Technological College
Kamagong St., Fortune VI, Parada, Valenzuela City
Demonstration Observe the Perform the Job Compare the Lumber, Plywood, 3hr
trainee’s Sheet 2.1-5 Job Sheet 2.1- Nails, G.I. Wire,
demonstration on 5 to the Chalk line, Pencil,
how to remove Performance Claw Hammer,
formworks Criteria Sledge Hammer,
Checklist Level Hose/Level
Bar, Steel Tape,
Nylon String,
Plumb Bob, Steal
Square,
Carpenters
Square, Lifting
Equipment, Crow
Bar, Rip Saw,
Adjustable
Wrench, P.P.E.
2. How to Dismantle Self-Study Read Information Answer Sheet Compare the Information Sheet 1hr
Scaffold Sheet. 2.1-5 on 2.1-5 Answer to the No. 2.1-5 of
how to dismantle Answer Key CBLM
scaffold 2.1-5
Video View the video Answer the Oral Answer the Projector, Laptop, 1hr
Presentation presentation on Questioning Oral Speaker
how to dismantle Questioning
scaffold Correctly
Demonstration Observe the Perform the Job Compare the Lumber, Plywood, 3hr
trainee’s Sheet 2.1-5 Job Sheet 2.1- Nails, G.I. Wire,
demonstration on 5 to the Chalk line, Pencil,
how to dismantle Performance Claw Hammer,
scaffold Criteria Sledge Hammer,
Valenzuela City Technological College
Kamagong St., Fortune VI, Parada, Valenzuela City