Professional Documents
Culture Documents
Connecting To Zebra Scanners
Connecting To Zebra Scanners
Connecting To Zebra Scanners
Disclaimer
The purpose of this guide is to give an example as to how to set up a barcode scanner so that
it works with Movilitas Mobile. The descriptions provided are not exhaustive and are not
meant to be exhaustive and do not attempt to cover all models from the providers or all
possible setup scenarios that may be relevant to your goals or particular needs.
While we endeavor to keep the information up to date and correct, Movilitas makes no
representations or warranties of any kind, express or implied about the completeness,
accuracy, reliability, suitability, or availability with respect to the information covered in this
guide for any purpose.
TABLE OF CONTENTS
To use a Zebra scanner with Movilitas Mobile, you need to set up the scanner as described in the
procedure below.
Procedure
For more information on how to set up a Zebra scanner, check this video.
Note: When using the acceptance environment, you need to create a separate DataWedge
profile for the mobile application. Follow the procedure as described above, but create the
profile for Movilitas Mobile Acceptance and select
com.acceptance.movilitas.mobile as the associated application.
Next Steps
Verify the scanner setup by opening a text editor on the device and scanning a test barcode. If the setup is
correct, you can see the scanned data in the text editor.
When scanning a lot of items, trigger-based scanning can be time-consuming because the
user presses and releases the scanner button for each barcode.
The Continuous Read function enables the users to do ultrafast scanning by pressing and
holding the scan trigger while pointing the reader to each barcode. The function can be
activated separately in the DataWedge settings.
Procedure
2. Depending on the Movilitas.Cloud environment you are using, select Movilitas Mobile
profile (production) or Movilitas Mobile Acceptance profile (acceptance).
Disclaimer
The purpose of this guide is to give an example as to how to set up a barcode scanner so that
it works with Movilitas Mobile. The descriptions provided are not exhaustive and are not
meant to be exhaustive and do not attempt to cover all models from the providers or all
possible setup scenarios that may be relevant to your goals or particular needs.
While we endeavor to keep the information up to date and correct, Movilitas makes no
representations or warranties of any kind, express or implied about the completeness,
accuracy, reliability, suitability or availability with respect to the information covered in this
guide for any purpose.
Procedure
5. Choose Select an application and find and select MovilitasMobile from the list.
7. Choose Data Processing Settings and enable Scan To Intent and Data Intent.
Disclaimer
The purpose of this guide is to give an example as to how to set up a barcode scanner so that
it works with Movilitas Mobile. The descriptions provided are not exhaustive and are not
meant to be exhaustive and do not attempt to cover all models from the providers or all
possible setup scenarios that may be relevant to your goals or particular needs.
While we endeavor to keep the information up to date and correct, Movilitas makes no
representations or warranties of any kind, express or implied about the completeness,
accuracy, reliability, suitability, or availability with respect to the information covered in this
guide for any purpose.
Procedure
To use a Datalogic scanner with Movilitas Mobile, you need to set up the scanner as
described in the procedure below.
2. Select Formatting.
Example:
3. Clear prefix and postfix (suffix), and exit formatting.
Example:
5. Configure the wedge settings:
Example:
6. Exit the wedge settings and select Commit on the scanner settings page.
Next Steps