Professional Documents
Culture Documents
FRENIC Series - 24A2
FRENIC Series - 24A2
Series
24A2-E-0020a
Fuji Inverter Family Consisting of a Diverse Lineup
High
performance High Performance Vector Control Inverter Direct parallel connection
Advanced Stack Type
Three-phase 400V to 2,400kW
function Three-phase 400V 30 to 800kW Three-phase 690V to 1,200kW
Three-phase 690V 90 to 450kW
FRENIC-Ace
Three-phase 200V 0.1 to 22kW
Three-phase 400V 0.4 to 22kW
Single-phase 200V 0.1 to 2.2kW
Compact Inverters
2
Diversifying Fuji inverter applications :Best suitable :Suitable
3
FRENIC Series
Digital
input X
Capacity range
terminal Digital *1 *1
(application Overload Analog Analog Output
Series name Input voltage class including input Y
motor capacity) capability input output frequency range
FWD/ terminal
[kW]
REV
terminal
150% -1min.
Three-phase 690V (MD) 90 to 450 kW 0.1 to 500Hz
Three-phase 400V(LD) 37 to 1000 kW
110% -1min.
Three-phase 690V (LD) 110 to 450 kW
4
Auto-restart after momentary power failure
PID control
:Equipped
Overload prevention control
Torque limiter
Hit-and-stop control
*2
Dancer roll control
*3 If the output frequency exceeds 599 Hz, the inverter will stop with overspeed protection.
Velocity zero control
Servo lock
*1 The behavior of analog input and output can be switched by settings. Refer to the catalogue of each series.
Calendar function
Traceback function
Online tuning
Pump control
5
Special option
FRENIC-
Applicable inverter Ace
Operation
Remote touch panel with USB Standard ̶ ̶ ̶
option
* The number of connectors of the RS-485 port can be changed from 1 to 2 by mounting an option card.
6
Wiring diagram of peripheral equipment of inverter
For main power input and Power 3 External operation, measurement and communication Built-in option card
inverter output
Remote keypad ■ Control option card
AC reactor R S T [TP- ]
[ACR□-□□□]
MCCB
or
Used for remote operation of the inverter
・Relay Output Interface Card
When using a power supply with
ELCB
U V W [OPC-■-RY]
Conversion of transistor outputs of the
unstable voltage. inverter to relay output signals
Extension cable for remote control
*1 If not using an R0, T0 terminal, connect a connector [CB-□S] ・Digital Interface Card
[OPC-■-DI], [OPC-■-DO]
U V W
at this location.
Cable used for remote control Frequency setting with binary or BCD
Arrester
X Y Z
Consult our sales digital signals
[CN5 ] representatives
・Analog Interface Card
[OPC-■-AIO]
※1
Suppresses induced lightning surges from the
Torque control with external analog
power source to protect entire equipment Contactor
signals
connected to the power source.
・PG Interface Card
Ferrite ring for reducing radio noise [OPC-■-PG□]
[ACL-40C, ACL-74C, F200160] PG vector control with feedback
signals by the encoder
Used to reduce radio noise. Suppressive effect to the [OPC-■-PMPG]
frequency band is available by approximately 1MHz or Synchronized motor operation with
more. This is appropriate as a simple measure against sensors enabled by combination with
noise since it affects broad range in the frequency band. MEGA (synchronized motor drive type)
7
Fuji Inverter Family Contributing with a Diverse Lineup
Standard Semi-standard
product product
Compact Inverters ●Series of compact inverters equipped with functions ideal for diverse small capacity needs
●Frequency setting volume control provided as standard equipment, allowing easy operation
● Dynamic torque-vector control, PDI control function, cooling fan ON/OFF control function and
synchronous motor control provided
High Performance Inverters ● Series of inverters applicable to diverse applications ranging from simple variable-speed
applications to business sector-specific machines requiring high performance and multiple functions
FRENIC-Ace ● Capable of four load ratings according to applied load, optimizing total cost and offering
space-saving performance *1
● Customizable logic function provided as standard feature to allow up to 200 steps of programming
High Performance Multifunctional Inverters ● General-purpose inverter with best-in-class vector control.
Capable of vector control of induction and synchronous motors at up to 599 Hz.
● Achieves high environmental resistance by using PCB coating, compliant with IEC60721 3-3 Class 3C2
as standard, and IP55 protection for the inverter back.
● Enhancement of maintenance, traceback, and PC and mobile loader facilitates maintenance.
Standard Built-in Synchronous Optimized Position Detachable Built-in USB EC Directive UL Standards
type EMC filter motor driving minimum control keypad terminal (CE marking) (cUL Standards)
power control
HND
HHD
Integrated Pulse train Ratio Customizable Traceback Double Functional
DC reactor input operation logic rating safety STO
8
Standard Semi-standard
product product
Variable Torque Load Inverters for ● Series of inverters developed exclusively for square reduction loads such as fans and pumps
Fans and Pumps ● Equipped with various functions including new system of automatic energy saving, PID control, life
expectancy prediction and commercial power supply operation switching sequence
● Ideal for air-conditioning systems, fans and pumps, for which conventional general-purpose
※
inverters could not be used due to cost and function issues
* Supports up to 15 kW.
Inverter for HVAC Applications ● Series of inverters equipped with energy-saving and special functions required for air
conditioning market and designed exclusively for specific market
● EMC filter and DC reactor (DCR) provided as standard equipment *1
Optimized
minimum
power control
*1 DC reactors of three-phase 200 V: 0.75 to 45 kW and three-phase 400 V: 0.75 to 90 kW are built in *2 Compatible with three-phase 200 V: 0.75 to 45kW and three-phase 400 V: 0.75 to 90 kW.
High Performance Vector Control Inverter ● Fuji's highest-performance series of inverters bringing vector inverter technologies together
● Provided with vector control with and without speed sensor and V/f control
● Full-fledged maintenance functions enabled by calendar function and traceback
● Safety function (STO) compliant with functional safety standard EN61800-5-2 provided as standard feature
● Stack type three-phase 690 V 355 to 450 kW provided with new device (SiC hybrid module) capable of
realizing significant reduction of generated loss as compared with conventional Si module
● A Marine standard compatible product lineup has been added as semi-standard products.(Certifying
body:DNV GL classification societies)*1
Stack Type
Three-phase 400V/30kW to 800kW(MD)
Three-phase 690V/90kW to 450kW(MD)
9
FRENIC Series
FRN 0010 C 2 S - 2 A
Code Series name Code Destination / Instruction Manual
FRN FRENIC Series A Asia/English
E Europe/English
Code Nominal applied motor capacity U USA/English
0001 0.1kW C China/Chinese
J Japan/Japanese
0060 15kW
Code Input power source
Code Application range 2 Three-phase 200V
C Compact 4 Three-phase 400V
6 Single-phase 100V
Code Developed inverter series 7 Single-phase 200V
2 2series
Code Structure
S Standard (IP20)
E Built-in EMC filter(IP20)
FRN 0004 E 2 S - 2 GB
FRENIC-
Code Series name Code Destination / Instruction Manual
Ace Global/English
FRN FRENIC Series GA, GB *1
E Europe/English
Code Nominal applied motor capacity C China/Chinese
0001 0.1kW K Korea/Korean
J Japan/Japanese
0590 315kW *1 Control terminals differ between GA model and GB model.
For details, please refer to the FRENIC-Ace catalog.
FRN 0003 G 2 S - 4 G
Code Series name Code Destination / Instruction Manual
FRN FRENIC Series G Grobal / English
C China/Chinese
Code (kW)[HP] Nominal applied motor capacity J Japan/Japanese
0002 0.4kW
∼
10
INVERTER LINE-UP
FRN 5.5 F 1 S - 2 A
Code Series name Code Destination / Instruction Manual
FRN FRENIC Series A Asia/English
E Europe/English
Code (kW)[HP] Nominal applied motor capacity U USA/English
0.75 [001] ∼ 0.75kW J Japan/Japanese
FRN 3.7 AR 1 L - 4 A
Code Series name Code Destination / Instruction Manual
FRN FRENIC Series A Asia/English
E Europe/English
Code (kW)[HP] Nominal applied motor capacity U USA/English
0.75 [001] 0.75kW J Japan/Japanese
FRN 30 S VG 1 S - 4 E
Code Series name Code Destination / Instruction Manual
FRN FRENIC Series E English
C Chinese
Code Nominal applied motor capacity
J Japanese
0.75 0.75kW
Code Input power source
800 800kW 2 Three-phase 200V
4 Three-phase 400V
Code Form
69 Three-phase 690V
None Unit type
S Standard stack Code Structure
B Stack by phase S Standard
11
Overseas service network
4-1 4
4-2
Spain Milan Craiova
Barcelona Beijing
Italy 3-2 Seoul
Goldach
China South Korea 1 Tokyo
Suzuka
Chengdu 3
Shanghai
India 3-1
Dubai Guangzhou Taipei
Shenzhen Taiwan
2-1
Africa Mumbai
Bangkok
Thailand
2
Singapore
Indonesia
Jakarta
Australia
*Note: See the pages listed for detailed company and contact information.
12
region
Canada
Seattle 5-1
Portland Chicago New York
San Francisco
Sioux Falls 5- Charlotte
USA
San Jose
Norfolk
Los Angeles
Japan Long Beach Jacksonville
Houston
Mexico
Panama
Panama City
Venezuela
Latin America
Sao Paulo
Sydney
Auckland
New Zealand
nia
13
Far East Asia & China Area
3-2 3a
Beijing
1a
CHINA Seoul 1
3j
Tokyo
3 KOREA Suzuka
3f 3-1 3 c 3 d 3 e 3 g 3 i JAPAN
Chengdu Shanghai
Wuxi
3i
Applicable Products
Mark Name Address, Phone etc. Business Hours English
Minor trouble Major trouble
Overseas Service Center 5520, Minamitamagaki-cho, 08:30 ∼ 17:15 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Suzuka-City, Mie 513-8633, Japan (GMT +9hours)
1 ・Phone : +81-59-383-8326 Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +81-59-383-8874
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
CANA ELECTRIC CO., Cana Bldg,62,Nambusunhwan-ro 356-gil, 08:30 ∼ 17:30 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
LTD. Seocho-Gu, Seoul, 137-887 Korea (GMT +9hours)
1a ・Phone : +82-2-3462-0670 Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +82-2-3462-0678
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
ELTA ELECTRICAL CO., No.256, Shannong St. Sanchong Dist., 08:30 ∼ 17:30 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
LTD. New Taipei City, 241018, Taiwan (GMT +8hours)
1b ・Phone : +886-2-2597-6458 Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +886-2-2595-4571
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Ching Tong Trading Co., 16 Alley 4, Lane 78, Chang-An W. Rd., 08:30 ∼ 18:30 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Ltd. Taipei 10351, Taiwan (GTM +8hours)
・Phone : +886-2-2555-2121 Machine Machine
1c ・Fax : +886-2-2559-8666
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・E-mail : service@ctkingdom.com Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
FULL KEY SYSTEM CO., 12F.,No. 111-8, Xingde Rd., Sanchong 09:00 ∼ 18:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
LTD. Dist., New Taipei City, Taiwan (GTM +8hours)
・Phone : +886-2-2995-2008 Machine Machine
1d ・Fax : +886-2-2995-2028
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
14
INV ≦ 22kW INV ≧ 30kW Medium Voltage
General Purpose Inverter, below 22kW General Purpose Inverter, above 30kW Medium Voltage Inverter
Vector Inv Vector Inverter Machine Tool Inv Machine Tool Inverter PLC POD
PLC POD
China Servo Amp. Servo Amp. Servo Motor Servo Motor Motor Motor
Applicable Products
Mark Name Address, Phone etc. Business Hours English
Minor trouble Major trouble
FUJI ELECTRIC 26F, Global Harbor Tower B, 09:00 ∼ 17:35 No INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
(CHINA) CO., LTD. 1188 North Kaixuan Road,Putuo District, (GMT +8hours)
3 Shanghai 200062, R.P.CHINA Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +86-21-5496-1177
・Fax : +86-21-5496-0189 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Shenzhen Office Room 2602, Han Tang Buliding,Oversea 09:00 ∼ 17:35 No INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Chinese Town, Nanshan District, (GMT +8hours) Machine Machine
3-1 Shenzhen,CHINA (P.C.518052) Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +86-755-8363-2248
・Fax : +86-755-8362-9785 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Beijing Office Unit 2007, Tower A Phoenix Place, 5A 09:00 ∼ 17:35 No INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Shuguang Xili, Chaoyang District, Beijing, (GMT +8hours)
Machine Machine
3-2 China (P.C.100028) Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +86-10-5939-2250
・Fax : +86-10-5939-2251 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Beijing Blue Stone Floor 22, Kemao Canter Building, No.18, 09:00 ∼ 17:30 No INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Technology Development Xhongguanchun Street, Haidian District, (GMT +8hours)
3a Co., Ltd. Beijing, China (P.C.100190) Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +86-10-6256-1166, 8125
・Fax : +86-10-6264-1552 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Star Automation Room916, Yin Long Zhan Ye Building, Shen Nan Rd, 08:30 ∼ 17:30 No INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Equipment(Shenzhen) Che Gong Miao, FuTian District, Shenzhen City, (GMT +8hours)
3b Co., Ltd. GuangDong Province, P.R.China (P.C.518040) Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +86-755-8347-9580
・Fax : +86-755-8347-9509 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Rujiang Engineering No.401, Royal Villa Mingdi International Hotel, 08:30 ∼ 17:00 No INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Equipment Co.,Ltd. Jianhe Road No.668, Shanghai City, P.R.C. (GMT +8hours)
・Phone : +86-21-6321-7500 Machine Machine
3c ・Fax : +86-21-6321-8655
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Polytrade (Shanghai) Rm.806,Enterprise Plaza, No.228 09:00 ∼ 18:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Co., Ltd. Mei Yuan Road, Shanghai, (GMT +8hours)
China (P.C.:200070) Machine Machine
3d ・Phone : +86-21-6381-6236
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +86-21-6381-6760 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Shanghai Stone Trading Room 505, No.1, 600 Nong, 09:00 ∼ 16:30 No INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Co.,Ltd. Tianshan Road, Changning District, (GMT +8hours)
3e Shanghai, China Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +86-21-6113-6333
・Fax : +86-21-6113-6555 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Wuxi Xinqiyuan No.400, Wuxi (National) Industrial Design 08:30 ∼ 17:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Technology Co.,Ltd. Parck, Hongqiao Road, Liyuan Economic (GMT +8hours)
3f Developing Zoon, Wuxi, Jiangsu, China Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +86-510-8513-5390
・Fax : +86-510-8513-5391 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Shanghai Hui Chuang No.102, Guilin Science Park No.5 Buliding, 08:30 ∼ 12:00 No INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Industrial Co.,Ltd. Guiping Road No.333, Xuhui District, 13:00 ∼ 17:30
3g Shanghai City, P.R.C.
(GMT +8hours) Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +86-21-6495-9251
・Fax : +86-21-2301-0459 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Hangzhou Sun Electric No.B406, Science Buliding, 08:30 ∼ 17:30 No INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Co.,Ltd. East Software Park, Wensan Road No.90,(GMT +8hours)
Hangzhou City, Zhejiang Province, P.R.C. Machine Machine
3h ・Phone: +86-571-8195-1299
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +86-571-8195-1211 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
SHANGHAI LONGSTANDING 4F, Buliding 11, Suide Road No.2 Nong, 08:30 ∼ 12:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
ELECTROMECHANICAL Shanghai City, P.R.C. 13:00 ∼ 17:30
3i CONTROL EQUIPMENT ・Phone : +86-21-5108-8777
(GMT +8hours) Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
CO.,LTD. ・Fax : +86-21-5108-7802
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Zibo HuiKe Mechanical & No.3-06, The Area in Mechanical and Electrical Hardware City, 08:40 ∼ 11:30 No INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Electrical Equipment Zhangdian District, Zibo City, Shandong Province, P.R.C.
13:30 ∼ 17:30
3j Co.,Ltd. ・Phone : +86-533-285-7971
(GMT +8hours) Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
(Hot Line : +86-400-600-3499)
・Fax : +86-533-285-7972 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Shanghai Angdian Make69, No.2031, Jiangchuan Road, Minhang 08:00 ∼ 16:30 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Industry Co., Ltd. District, Shanghai, China (P.C.201111) (GMT +8hours)
3-1 Motor Reparative Factory ・Web : www.sh-angdian.com Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +86-21-6430-1105
・Fax : +86-21-5475-8621 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Contact your local Fuji Electric sales affiliate to request after-sales service (including spare parts for power distribution/control equipment).
Please contact each service company for applicable products in detail.
15
Southeast Asia & Oceania
2e
UAE BANGLADESH
Dubai INDIA
2-1 2f
Mumbai THAILAND PHILIPPINES
2a 2 a Vietnam
Manila
Bangkok
2d
Ho Chi Minh
2 b MALAYSIA
2 2A
Kuala Lumpur
Singapore
2 c 2b
Jakarta
INDONESIA
AUSTRALIA
2B
Sydney
2c
Auckland
NEW ZEALAND
Fuji FA Service Centers
Sub-contracted Companies
16
INV ≦ 22kW INV ≧ 30kW Medium Voltage
General Purpose Inverter, below 22kW General Purpose Inverter, above 30kW Medium Voltage Inverter
Vector Inv Vector Inverter Machine Tool Inv Machine Tool Inverter PLC POD
PLC POD
Servo Amp. Servo Amp. Servo Motor Servo Motor Motor Motor
Applicable Products
Mark Name Address, Phone etc. Business Hours English
Minor trouble Major trouble
South East & Oceania 151 Lorong Chuan, 08:45 ∼ 17:30 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Service Centre #03-01/01A New Tech Park lobby A, (GTM +8hours) Machine Machine
2 Fuji Electric Asia Pacific Pte. Ltd. Singapore 556741 Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +65-6533-0010
・Fax : +65-6533-0021 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Fuji Electric India Private 503, A-wing, Dynasty Business Park, 08:45 ∼ 17:30 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Limited Andheri-Kurla Road And-heri (East), (GTM +5.5hours) Machine Machine
2-1 Mumbai-400 059, India
・Web : www.fujielectric.co.in
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +91-22-4010-4870 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Fuji Technical Centre 48 Toh Guan Road East #09-110, 08:30 ∼ 18:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
(S'pore) Pte Ltd. Enterprise Hub Singapore 608586 (GTM +8hours)
2A ・Phone : +65-6515-5970, 5971 Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +65-6515-5155
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Fuji Technical Centre 8 Soi Lasalle 77, Kwaeng Bangna, 08:30 ∼ 17:30 INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
(Thailand) Co., Ltd. Khet Bangna, Bangkok 10260, Thailand (GTM +7hours) Yes
2a ・Phone : +66-2393-8904 ∼ 6 Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +66-2393-8909
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
PT. Unitama Sentosa Jl. R. E. Martadinata Kompleks Permata 08:30 ∼ 17:30 INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Gemilang Ancol Blok N -32 Jakarta Utara Indonesia (GTM +7hours) Yes
2b ・Web : www.unitama.co.id Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +62-21-6451132 / 34 / 35
・Fax : +62-21-6451130 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
CSE-UNISERVE PTY. 10 Columbia Way Baulkham Hills 08:30 ∼ 17:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
LIMITED NSW 2153 Australia (GTM +10hours)
2B ・Web : www.cse-uniserve.com.au Machine Machine
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +61-2-8853-4200
・Fax : +61-2-8853-4281 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
CSE-Uniserve NZ Limited Unit F, 55 Druces Road Manukau Clity, 08:30 ∼ 17:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
New Zealand (GTM +12hours)
2c ・Web : www.cse-waf.co.nz Machine Machine
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +64-9-271-3810
・Fax : +64-9-262-3292 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
S.T. Control Co., Ltd. 84/1,Soi Ramkhamhaeng 9 (Thararom), 08:00 ∼ 17:00 INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Ramkhamhaeng Road, Wangthonglang, Bangkok 10310. (GTM +7hours) Yes
2a ・Web : www.stcontrol.com Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +66-2-319-2559
・Fax : +66-2-319-1800 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
EITA Electric Sdn. Bhd. Lot 4, Block A, Jalan SS13/7,Subang Jaya Industrial Estate, 08:30 ∼ 18:00
Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
47500 Subang Jaya,Selangor Darul Ehsan, Malaysia. (GTM +8hours)
2b ・Web : www.eita.com.my Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +60-3-5637 8088
・Fax : +60-3-5635 4719 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
PT. DUTA FUJI ELECTRIC JL. HAYAM WURUK 4F-H, JAKARTA 10120 08:00 ∼ 17:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
・Web : www.dutafuji.com (GTM +7hours)
・Phone : +62-21-384-0834 Machine Machine
2c ・Fax : +62-21-352-1208,352-1207
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Hao Phuong Co.,Ltd. 7/31 Song Than Business Center, 08:00 ∼ 12:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Di An Ward,Binh Duong Province, Vietnam 13:30 ∼ 17:00
2d ・Web : www.haophuomg.com
(Sat.:08:00∼12:00) Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +84-650-3737619
・Fax : +84-650-3737620 (GMT +7hours) Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
M.A.H.Y Khoory Abu Hail, Dubai, United Arab Emirates SAT∼THU Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
& Co. L.L.C P.O BOX - 41 08:00∼17:00
2e ・Web : https://mahykhoory.com/ Vector Inv Machine Machine
・Phone : +971 4 6067300 (GMT +4hours) Tool Inv PLC POD Vector Inv Tool Inv PLC POD
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Automation Engineering AKH Tower(3rd Floor), Plot#10, Lane#05, SAT∼THU Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
& Controls Ltd. Road #01, Block#L, Agrabad Access Road, Barapole, 09:00∼18:00
2f Halishahar Housing Estate, Chittagong-4216. Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +88-031-725750, 724259, 754259 (GMT +6hours)
・Fax : +88-031-714128 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Contact your local Fuji Electric sales affiliate to request after-sales service (including spare parts for power distribution/control equipment).
Please contact each service company for applicable products in detail.
17
Europe, Middle East & Africa Area
U.K.
4A GERMANY
London Baesweiler 4
Frankfurt
4D
FRANCE 4-1
Nurnberg
4B Paris
4-2 Goldach
ROMANIA
SWITZERLAND
4d
4C Milan Craiova
4-2
ITALY
4b
4 a 4-1 Barcelona Istanbul
SPAIN
TURKEY
RUSSIA
4c
Moscow
U.K. GERMANY
FRANCE
SWITZERLAND
ITALY
SPAIN TURKEY
AFRICA
Sub-contracted Companies
18
INV ≦ 22kW INV ≧ 30kW Medium Voltage
General Purpose Inverter, below 22kW General Purpose Inverter, above 30kW Medium Voltage Inverter
Vector Inv Vector Inverter Machine Tool Inv Machine Tool Inverter PLC POD
PLC POD
Servo Amp. Servo Amp. Servo Motor Servo Motor Motor Motor
Applicable Products
Mark Name Address, Phone etc. Business Hours English
Minor trouble Major trouble
EU Service Center Goethering 58, 63067 Offenbach/Main 09:00 ∼ 18:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Germany (GMT +1hour)
4 Fuji Electric Europe GmbH ・Web : www.fujielectric-europe.com Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +49-69-66-90-29-0
・Fax : +49-69-66-90-29-58 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Fuji Electric Europe C/dels Paletes 8, Edifici B, Primera Planta B, 09:00 ∼ 18:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
GmbH, Spain Branch Parc Tecnològic del Vallès,
08290 Cerdanyola del Vallès (Barcelona), Spain (GMT +1hour) Machine Machine
4-1 ・Web : www.fujielectric-europe.com Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +34-93-5824-333
・Fax : +34-93-5824-344 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Fuji Electric Europe Rietlistrasse 5, 08:00 ∼ 17:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
GmbH, 9403 Goldach, Switzerland (GMT +1hour)
・Web : www.fujielectric-europe.com Machine Machine
4-2 Switzerland Branch
・Phone : +41-71-858-2949
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +41-71-858-2940 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
KEMPSTON CONTROLS Shirley Road Rushden, Northamptonshire 09:00 ∼ 18:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
NN10 6BZ, U.K. (GMT+1hour)
4A ・Web : www.kempstoncontrols.co.uk Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +44-1933-411411
・Fax : +44-1933-410211 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
C.N.C. SERVICES 37, rue de Villeparisis-BP33 09:00 ∼ 18:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
(République)-77290 Mirty-Mory, France (GMT +1hour)
4B ・Web : www.cncservices.fr Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +33-1-64-67-93-72
・Fax : +33-1-64-27-66-54 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
S.A.T. ENGINEERING Via Palermo, 22 20090 Assago(MI), Italy 09:00 ∼ 18:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
S.R.L. ・Web : www.satengineering.com (GMT +1hour)
4C ・Phone : +39-2-4571-3516 Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +39-2-4571-4435
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
GTS Gesellschaft für Arnold-Sommerfeld-Ring 10, 52499 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Technischen Service mbH Baesweiler, Germany
4D ・Web : www.GTSmbH.com Machine Machine
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +49-2401-60-353-0
・Fax : +49-2401-60-353-13 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
SERVICIO INDUSTRIAL Poligon Industrial Monguit C/Centelles S/N - Nave ― Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
DE ELECTRÓNICA S.A. A y B 08480 L'Ametlla del Vallès (Barcelona)
4a ・Web : www.side.es Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +34-902-88-45-61
・Fax : +34-902-88-45-59 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Kontek Otomasyon A.S. Efnan Sok. No:9, Merkez Mah. Çekmeköy, 08:00 ∼ 17:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
34782 Istanbul, Turkey (GMT +2hour)
4b ・Web : kontekenerji.com.tr Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +90-216-446-4700
・Fax : +90-216-466-2120 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
INDUSTRIAL ELECTRIC Leninskij prospect 121/1, korp 2, 08:00 ∼ 17:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
SYSTEMS 119571 Moscow, Russia (GMT +4hour)
4c ・Web : www.indels.ru Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +7-495-781-0098
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
R.e B. Impianti s.r.l Contrada Molino, ― Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
17/N, 46042 Castel Goffredo
(MN), Italy Machine Machine
4d ・Phone:+39-376-171-5753
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
BEN Buchele Poppenreuther Straße 49a, D-90419 ― Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Elektromotorenwerke Nürnberg, Germany
・Web : www.benbuchele.de Machine Machine
4-1 GmbH
・Phone : +49-911-37-48-0
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +49-911-37-48-138 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
MOTOARE ELECTRICE Craiova-200633, Popoveni 7, Romania ― Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
SRL ・Phone/Fax : +40-251-425-343
4-2 Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Contact your local Fuji Electric sales affiliate to request after-sales service (including spare parts for power distribution/control equipment).
Please contact each service company for applicable products in detail.
19
USA, Canada, Central & South America Area
5- 5
CANADA Panama City
5- 3 5- 6 VENEZUELA
Seattle PANAMA
5a
Portland 5-1
5f Sioux Fslls 5g
Chicago New York
San Francisco
San Jose USA 5 5C 5- 3
5A 5- 1 5 b Charlotte Norfolk
Los Angeles CENTRAL & SOUTH AMERICA
5c 5d 5- 4
Long Beach Jacksonville
Houston 5e 5h
MEXICO São Paulo
Monterrey
Fuji FA Service Centers 5- 7
Sub-contracted Companies
Applicable Products
Mark Name Address, Phone etc. Business Hours English
Minor trouble Major trouble
USA SERVICE CENTER 105 14th St NW, Roanoke, VA 24017, 09:00 ∼ 17:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
Fuji Electric Corp of America USA (GMT -5hours)
5 ・Phone : +1-540-491-9625 Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
CHICAGO SERVICE 210 Dowdle Ct. Unit 2, Algonquin, 09:00 ∼ 17:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
STATION IL 60102, USA (GMT -6hours) Machine Machine
5-1 ・Phone : +1-847-397-8040 Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
MAHO SERVICE INC. 5550 Cerritos Ave. Suite H, Cypress, 08:00 ∼ 17:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
CA 90630, USA (GMT -8hours)
5A ・Phone : +1-714-220-1878 Machine Machine
Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +1-714-220-1870
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
INDUSTRIAL 1901 Lendew St, Ste#9., Greensboro, 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
ELECTRONIC NC 27408, USA
5C SOLUTIONS ・Web : www.iesgso.com Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +1-336-275-3426
・Fax : +1-336-378-1183 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
20
General Purpose Inverter, General Purpose Inverter, Vector Inv Machine Tool Inv PLC POD Servo Amp. Servo Motor Motor
below 22kW above 30kW Medium Voltage Inverter Vector Inverter Machine Tool Inverter PLC POD Servo Amp. Servo Motor Motor
Applicable Products
Mark Name Address, Phone etc. Business Hours English
Minor trouble Major trouble
MALLOY ELECTRIC 809 West Russell St., Sioux Falls, 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
SD 57104, USA
Machine Machine
5a ・Phone : +1-605-336-3693 Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +1-605-336-1545
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
KELLER ELECTRICAL 1881 East University Drive, Phoenix, 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
INDUSTRIES, INC. AZ 85034
5b ・Web : www.kellerelectrical.com Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +1-602-437-3015
・Fax : +1-602-437-8163 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
CONTROL CONCEPTS, 6635 Theall Rd, Houston, TX 77066, 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
INC. USA
5c ・Web : www.controlconceptstexas.com Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +1-713-352-3210
・Fax : +1-602-437-8163 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
SPECIALIZED 10890 Alder Circle, Dallas, TX 75238, USA 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
ELECTRONIC ・Web : www.specializedelectronics.com
5d SERVICES, INC. ・Phone : +1-972-680-9210 Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +1-972-690-9200
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
MSA CONTROL Rua lapo 334, - Casa Verde - Sao Paulo - 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
INDUSTRIA SP - Brasil - CEP 02512-020
Machine Machine
5e ELECTRICA LTDA. ・Web : www.msacontrol.com.br Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +55-11-3961-1171
・Fax : +55-11-3961-1171 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
DYKMAN ELECTRICAL, 2323 Federal Way, Boise, ID 83705, USA 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
INC. ・Web : www.dykman.com
Machine Machine
5f ・Phone : +1-208-336-3988 Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Fax : +1-208-336-1506
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
ELECTRONIC DRIVES 17 Eastmans Road, Parsippany NJ, USA 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
AND CONTROLS INC. 07054
5g ・Web : www.electronicdrives.com Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +1-973-428-0500
・Fax : +1-973-428-0135 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
LUCAPEL COMERCIAL Rua lssaco Coppini, 43 - Bairro Oswaldo Cruz - 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
LTDA. Sao Caetano do Sul - SP - Brasil - CEP : 09571-110
5h ・Web : www.lucapel.com.br Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +55-11-4232-3422
・Fax : +55-11-4232-3424 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
REED ELECTRIC 5503 S. Boyle Avenue, Los Angeles, 08:00 ∼ 16:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
& FILED SERVICE CA 90058, USA (GMT -8hours) Machine Machine
5- 1 ・Web : www.reed-electric.com Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Tel : +1-323-587-2284
・Fax : +1-323-587-2142 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
CASCADE MACHINERY 4600 E.Marginal Way South, Seattle 08:00 ∼ 16:30 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
& ELECTRIC, INC. WA 98134, USA (GMT -8hours) Machine Machine
5- 2 ・Web : www.cascade-machinery.com Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +1-206-762-0500
・Fax : +1-206-767-5122 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
ELECTRIC MOTOR AND 3703 Cook Blvd. Chesapeake, VA 23323, 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
CONTRACTING CO., USA
5- 3 INC. ・Web : www.emc-co.com Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +1-757-487-2121
・Fax : +1-757-487-5983 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
WESTSIDE ELECTRIC 4031 Faye Rd. Jacksonville, FL 32226, 08:00 ∼ 16:30 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
INC. USA (GMT -5hours)
5- 4 ・Web : www.westside-electric.com Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +1-904-757-1126
・Fax : +1-904-757-6068 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Talleres Industriales, C.A. Av. Central CI. 16, Colon, Panama 08:00 ∼ 17:00 Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
・Phone : +1-507-433-9500 (GMT -5hours)
5- 5 Vector Inv Machine Machine
Tool Inv PLC POD Vector Inv Tool Inv PLC POD
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
CRANE REPAIR SERVICE 1002 Valley Avenue NW, Puyallup, 24hours Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
WA 98371, USA
・Web : www.lancecrane.com Machine Machine
5- 6 Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone: +1-253-848-9473
・Fax : +1-253-848-1790 Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
SANMA EQUIPOS Del Rastro 141, Villa de San Antonio, ー Yes INV≦22kW INV≧30kW Medium Medium
Voltage INV≦22kW INV≧30kW Voltage
INDUSTRIALES, 67110 Guadalupe, N.L., Mexico Machine Machine
5- 7 SA De C.V. ・Web : www.sanmaeq.com Vector Inv Tool Inv PLC POD Vector Inv Tool Inv PLC POD
・Phone : +52-81-8299-8345
Servo Amp. Servo Motor Motor Servo Amp. Servo Motor Motor
Contact your local Fuji Electric sales affiliate to request after-sales service (including spare parts for power distribution/control equipment).
Please contact each service company for applicable products in detail.
21
FRENIC Series
Application to "Guideline for Suppressing Harmonics by the Users Who Receive High Voltage or Special High Voltage"
These products fall under the scope of the "Guideline for Suppressing Harmonics by Customers Receiving High Voltage or Special High Voltage." When entering into a new
contract with an electric power company, or updating your existing contract, you will be requested to submit an accounting statement form by the electric power company.
(1) Scope of regulation Table 4 "Input fundamental currents" of general-purpose inverters determined by the nominal applied motors, 3-phase rectifier (smoothing capacitor)
In principle, the guideline applies to the customers that meet the following two conditions: Nominal applied motor [kW] 0.4 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22
• The customer receives high voltage or special high voltage.
Input 200V 1.61 2.74 5.50 7.93 13.0 19.1 25.6 36.9 49.8 61.4 73.1
• The "equivalent capacity" of the converter load exceeds the standard value fundamental
for the receiving voltage (50kVA at a receiving voltage of 6.6kV). current [A] 400V 0.81 1.37 2.75 3.96 6.50 9.55 12.8 18.5 24.9 30.7 36.6
6.6 kV converted value [mA] 49 83 167 240 394 579 776 1121 1509 1860 2220
(2) Regulation method
The level (calculated value) of the harmonic current that flows from the customer's receiving point Nominal applied motor [kW] 30 37 45 55 75 90 110 132 160 200 220
out to the system is subjected to the regulation. The regulation value is proportional to the Input 200V 98.0 121 147 180 245 293 357
contract demand. The regulation values specified in the guideline are shown in Table 1. fundamental
current [A] 400V 49.0 60.4 73.5 89.9 123 147 179 216 258 323 355
Table 1 Upper limits of harmonic outflow current per kW of contract demand [mA/kW] 6.6 kV converted value [mA] 2970 3660 4450 5450 7450 8910 10850 13090 15640 19580 21500
Receiving voltage 5th 7th 11th 13th 17th 19th 23th Over 25th Nominal applied motor [kW] 250 280 315 355 400 450 500 530 560 630
6.6kV 3.5 2.5 1.6 1.3 1.0 0.90 0.76 0.70 Input 200V
fundamental
22kV 1.8 1.3 0.82 0.69 0.53 0.47 0.39 0.36 current [A] 400V 403 450 506 571 643 723 804 852 900 1013
6.6 kV converted value [mA] 24400 27300 30700 34600 39000 43800 48700 51600 54500 61400
22
INVERTER LINE-UP
Product Warranty
When requesting an estimate and placing your orders for the products included in these materials, please be aware that any items such as specifications which are not specifically
mentioned in the contract, catalog, specifications or other materials will be as mentioned below.
In addition, the products included in these materials are limited in the use they are put to and the place where they can be used, etc., and may require periodic inspection. Please confirm
these points with your sales representative or directly with this company.
Furthermore, regarding purchased products and delivered products, we request that you take adequate consideration of the necessity of rapid receiving inspections and of product
management and maintenance even before receiving your products.
3. Repair Period after Production Stop, Spare Parts Supply Period (Holding Period)
Concerning models (products) which have gone out of production, this company will perform repairs for a period of 7 years after production stop, counting from the month and year
when the production stop occurs. In addition, we will continue to supply the spare parts required for repairs for a period of 7 years, counting from the month and year when the
production stop occurs. However, it is estimated that the life cycle of certain electronic and other parts is short and it will be difficult to procure or produce those parts, so there may be
cases where it is difficult to provide repairs or supply spare parts even within this 7-year period. For details, please confirm at our company's business office or our service office.
4. Transfer Rights
In the case of standard products which do not include settings or adjustments in an application program, the products shall be transported to and transferred to the customer and this
company shall not be responsible for local adjustments or trial operation.
5. Service Contents
The cost of purchased and delivered products does not include the cost of dispatching engineers or service costs. Depending on the request, these can be discussed separately.
23
NOTES
oil-lubricated gearbox or speed changer/reducer, not use power factor correcting capacitors in the
When running general-purpose motors then continuous motor operation at low speed may inverter output circuit (secondary). An overcurrent
cause poor lubrication. Avoid such operation. trip will occur, disabling motor operation.
• Driving a 400V general-purpose motor
When driving a 400V general-purpose motor with • Synchronous motors • Discontinuance of surge killer
an inverter using extremely long cables, damage to It is necessary to use software suitable for this Do not mount surge killers in the inverter output
the insulation of the motor may occur. Use an motor type. Contact Fuji for details. (secondary) circuit.
output circuit filter (OFL) if necessary after checking • Single-phase motors • Reducing noise
with the motor manufacturer. Fuji's motors do not Single-phase motors are not suitable for Use of a filter and shielded wires are typical
require the use of output circuit filters because of inverter-driven variable speed operation. Use measures against noise to ensure that EMC
their reinforced insulation. three-phase motors. Directives are met.
• Torque characteristics and temperature rise * Even if a single-phase power supply is available,
• Measures against surge currents
When the inverter is used to run a general-purpose use a three-phase motor as the inverter provides
If an overvoltage trip occurs while the inverter is
motor, the temperature of the motor becomes three-phase output.
stopped or operated under a light load, it is
higher than when it is operated using a commercial assumed that the surge current is generated by
power supply. In the low-speed range, the cooling Environmental conditions open/close of the phase-advancing capacitor in the
effect will be weakened, so decrease the output power system.
torque of the motor. If constant torque is required in • Installation location We recommend connecting a DC REACTOR to the
the low-speed range, use a Fuji inverter motor or a Use the inverter in a location with an ambient inverter.
motor equipped with an externally powered temperature range of -10 to 50˚C.
ventilating fan. The inverter and braking resistor surfaces become • Megger test
hot under certain operating conditions. Install the When checking the insulation resistance of the
• Vibration inverter, use a 500V megger and follow the
inverter on nonflammable material such as metal.
When the motor is mounted to a machine, instructions contained in the Instruction Manual.
Ensure that the installation location meets the
resonance may be caused by the natural
environmental conditions specified in "Environment"
frequencies, including that of the machine. Wiring
in inverter specifications.
Operation of a 2-pole motor at 60Hz or more may
cause abnormal vibration.
Combination with peripheral devices • Wiring distance of control circuit
* Study use of tier coupling or dampening rubber. When performing remote operation, use twisted
* It is also recommended to use the inverter jump • Installing a molded case circuit shield wire and limit the distance between the
frequency control to avoid resonance points. breaker (MCCB) inverter and the control box to 20m.
• Noise Install a recommended molded case circuit breaker • Wiring length between inverter and motor
When an inverter is used with a general-purpose (MCCB) or an earth leakage circuit breaker (ELCB) If long wiring is used between the inverter and the
motor, the motor noise level is higher than that with in the primary circuit of each inverter to protect the motor, the inverter will overheat or trip as a result of
a commercial power supply. To reduce noise, raise wiring. Ensure that the circuit breaker capacity is overcurrent (high-frequency current flowing into the
carrier frequency of the inverter. High-speed equivalent to or lower than the recommended stray capacitance) in the wires connected to the
operation at 60Hz or more can also result in more capacity. phases. Ensure that the wiring is shorter than 50m.
noise. • Installing a magnetic contactor (MC) If this length must be exceeded, lower the carrier
in the output (secondary) circuit frequency or mount an output circuit filter (OFL).
When running special motors If a magnetic contactor (MC) is mounted in the • Wiring size
inverter's secondary circuit for switching the motor
• High-speed motors Select cables with a sufficient capacity by referring
to commercial power or for any other purpose, to the current value or recommended wire size.
When driving a high-speed motor while setting the
ensure that both the inverter and the motor are fully
frequency higher than 120Hz, test the combination • Wiring type
stopped before you turn the MC on or off. Remove
with another motor to confirm the safety of Do not use multicore cables that are normally used
the surge killer integrated with the MC.
high-speed motors. for connecting several inverters and motors.
• Explosion-proof motors • Installing a magnetic contactor (MC)
in the input (primary) circuit • Grounding
When driving an explosion-proof motor with an Securely ground the inverter using the grounding
Do not turn the magnetic contactor (MC) in the
inverter, use a combination of a motor and an terminal.
primary circuit on or off more than once an hour as
inverter that has been approved in advance.
an inverter fault may result. If frequent starts or
• Submersible motors and pumps stops are required during motor operation, use Selecting inverter capacity
These motors have a larger rated current than FWD/REV signals.
general-purpose motors. Select an inverter whose • Driving general-purpose motor
rated output current is greater than that of the
• Protecting the motor Select an inverter according to the applicable motor
The electronic thermal function of the inverter can ratings listed in the standard specifications table for
motor.
protect the motor. The operation level and the motor the inverter. When high starting torque is required
These motors differ from general-purpose motors in
type (general-purpose motor, inverter motor) should or quick acceleration or deceleration is required,
thermal characteristics. Set a low value in the
be set. For high-speed motors or water-cooled select an inverter with a capacity one size greater
thermal time constant of the motor when setting the
motors, set a small value for the thermal time than the standard.
electronic thermal function.
constant to protect the motor.
• Brake motors If you connect the motor thermal relay to the motor • Driving special motors
For motors equipped with parallel-connected with a long cable, a high-frequency current may Select an inverter that meets the following condition:
brakes, their braking power must be supplied from flow into the wiring stray capacitance. This may Inverter rated current > Motor rated current.
the primary circuit (commercial power supply). If the cause the relay to trip at a current lower than the
brake power is connected to the inverter power set value for the thermal relay. If this happens,
Transportation and storage
output circuit (secondary circuit) by mistake, lower the carrier frequency or use the output circuit
When transporting or storing inverters, follow the
problems may occur. filter (OFL).
procedures and select locations that meet the
Do not use inverters for driving motors equipped
with series-connected brakes.
• Regarding power-factor correcting capacitor environmental conditions that agree with the inverter
Do not mount power factor correcting capacitors in specifications.
• Geared motors the inverter (primary) circuit. Use the DC
If the power transmission mechanism uses an REACTOR to improve the inverter power factor. Do