Professional Documents
Culture Documents
CP35-7H1 b3 System
CP35-7H1 b3 System
CP35-7H1 b3 System
www.bciholding.com
Polyrex CP 35/7
POLYREX CP 35/7
Viscosity 1400-1900 m Pa.s @20 °C ASTM D 4878-93
Specific Gravity 1.1376 g/l @20 °C ASTM D 891-09
ISOREX R310/1
Viscosity 200-270 m Pa.s @20 °C ASTM D 4878-93
Specific Gravity 1.23 g/l @20 °C ASTM D 891-09
TYPICAL REACTIVITY: Free rise density refers to bag test at an atmospheric pressure
When components are mixed in 350 ml cup with mixer of 760 mm Hg, Free rise density will vary depending on
rotation 3000 rpm, mixer diameter 4 cm for 7 seconds the atmospheric pressure. Values obtained on an industrial scale
reactivity profile and free rise density will be as listed in the may differ substantially from those obtained in the lab.
below Table.
Reactivity Profile
POLYREX CP 35/7 100 pbw @20 °C
ISOREX R310/1 150 pbw @20 °C
N. Penthane 7 pbw (as per density)
DMCHA 1 pbw
Cream Time 15-18 seconds BCI EGYPT #CT1115
Gel Time 57-62 seconds BCI EGYPT #GT1215
Rise Time 65-75 seconds BCI EGYPT #RT1315
Free Rise Density 36-37 kg/m3
PROCESSING RECOMMENDATIONS:
Components should be adjusted to the correct temperature before use to ensure reactivity and viscosity are suitable for precessing.
Processing Recommendations
Raw Material Temperature 20 - 22 °C
* For Thickness :Below 8 cm
CP35/7 100
Catalyst (0.6 - 1.5)
NP ( 5 - 10)
Isorex 310/1 150
Core Density without Skin For Thickness :Below 8 cm 37-39 kg/m3
* For Thickness :Above 8 cm
CP35/7 100
Catalyst (0.5-0.8)
NP (4 - 8)
Isorex 310/1 150
Core Density without Skin For Thickness :Above 8 cm 39-42
Our recommendation is to reduce the amount of catalyst and additive while we increase the thikness
Conveyor Temperature 40 - 45 °C
Over all Density 40 - 45 kg/m3( ASTM D1622)
STORAGE RECOMMENDATIONS:
If stored at temperature between 10-25 °C and protected against moisture, this product will remain stable for 6 months from production date.
Packaging
Polyrex CP 35/7 : 220 KG Metal Drums Isorex R 310/1: 250 KG Metal Drums
The data contained in this publication is based on our current knowledge and experience. In view of the many factors that may affect processing and
application of the product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any
guarantes of certain properties, nor the suitability of the product for a specific application.