Professional Documents
Culture Documents
Technical Specification For Flooring
Technical Specification For Flooring
Technical Specification For Flooring
1.S20014-0100D-CCH-Vol.2…
1 Travertino Stone Floor Tile Not less than 2.TCNA HANDBOOK FOR
20MM CERAMIC, GLASS, AND STONE
TILE INSTALLATION
1.S20014-0100D-CCH-Vol.2…
Not less than 2.TCNA HANDBOOK FOR
1 Travertino Stone Floor Tile
20MM CERAMIC, GLASS, AND STONE
TILE INSTALLATION
JECT SPECIFICATION SETTING MATERIAL
REFERENCE
14-0100D-CCH-Vol.2…
NA HANDBOOK FOR
MIC, GLASS, AND STONE
LE INSTALLATION
14-0100D-CCH-Vol.2…
NA HANDBOOK FOR
MIC, GLASS, AND STONE
LE INSTALLATION
SECTION 096340 - S
EXPANSION JOINT
Image reference TCNA handbook for ceramic, glass and stone tile installation
(PAGE-434)
SECTIONS AS PER TCNA
Image reference TCNA handbook for ceramic, glass and
stone tile installation (PAGE-312 to 315)
MOVEMENT JOINT
Interior—maximum of 25' in each direction
Interior tilework exposed to direct sunlight (heat) or
moisture—maximum of 12' in each direction
Preferred not less than ¼" nor greater than 3⁄8"
(width/depth
ratio not applied for static joint)
Factory-mounted
1 unglazed or glazed As indicated in drawings or AI Manual
ceramic mosaic tile.
(IMOS-51)
Unglazed Full-bodied
2 (Porcelain) tile. Not less than 8mm
Unglazed or glazed
4 ceramic or full-bodied Not less than 8mm
ceramic tile
SECTION 093000
THRESHOLD WATER PROOFING MEMBRANE
· Latex-Portland Cement
Mortar (Thin Set): ANSI
Recommend by A118.4.
manufacturer complies with · Water-Cleanable, Tile-
ANSI A118.10
Setting Epoxy with VOC
content 65g/L or less.
GROUTING TILE INSTALLATION PROCESS