Professional Documents
Culture Documents
MSDS MP-35
MSDS MP-35
Hazard Class
Flammable aerosols 1
Flammable liquids 2
Skin corrosion/irritation 2
Eye damage/irritation 2
Toxic to reproduction 1A
Aspiration hazard 2
Hazardous to the aquatic environment – Chronic
3
hazard
Category Indication
Symbol
Ingredients
Alkyd resin 1 1 0
Titanium oxide 1 0 0
Xylene 2 3 0
Toluene 2 3 0
Stabilizer - - 0
Dimethyl ether 2 4 1
Eye contact; Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at
least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention immediately.
Skin contact; In case of contact, immediately flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before
reuse. Get medical attention immediately.
Inhalation; Move exposed person to fresh air. If not breathing, if breathing is irregular or if respiratory arrest
occurs, provide artificial respiration or oxygen by trained personnel. Loosen tight clothing such as a collar,
tie, belt or waistband. Get medical attention immediately.
Ingestion; Call medical doctor or poison control center immediately. Wash out mouth with water. Do not
induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
unconscious person. Get medical attention immediately.
Suitable extinguishing media; Use water spray to keep fire exposed containers cool. If substance does
ignite, use CO2, dry chemical or foam.
Specific hazards arising from the chemical; No information found
Special protective equipment and precautions for fire fighters ; In the event of a fire, wear full protective
clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the
pressure demand or other positive pressure mode. Combustion by-products include phosgene and
hydrogen chloride gases. Structural firefighters' clothing provides only limited protection to the
combustion products of this material.
Personal precautions; No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch
or walk through spilled material. Shut off all ignition sources. No flares, smoking or flames in hazard area.
Do not breathe vapor or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation
is inadequate. Put on appropriate personal protective equipment (see section 8).
Environmental precautions; Avoid dispersal of spilled material and runoff and contact with soil, waterways,
drains and sewers. Inform the relevant authorities if the product has caused environmental pollution
(sewers, waterways, soil or air).
Methods for containment; ELIMINATE all ignition sources (no smoking, flares, sparks or flames in
immediate area). Dike the spilled material, where this is possible. Prevent entry into waterways, sewer,
basements or confined areas. Use water spray to reduce vapors or divert vapor cloud drift.
Methods for cleaning up;
- Large Spills: Dike far ahead of spill for later disposal. Use a non-combustible material like vermiculite,
sand or earth to soak up the product and place into a container for later disposal. Use only non-sparking
tools.
- Small Spills: Wipe up with absorbent material(e.g. cloth, fleece).
Handling; Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Use only
with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not enter
storage areas and confined spaces unless adequately ventilated. Keep in the original container or an
approved alternative made from a compatible material, kept tightly closed when not in use. Store and use
away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical
PRODUCT NAME PAGE
(ventilating, lighting and material handling) equipment. Use non-sparking tools. Take precautionary
measures against electrostatic discharges. To avoid fire or explosion, dissipate static electricity during
transfer by grounding and bonding containers and equipment before transferring material. Empty
containers retain product residue and can be hazardous. Do not reuse container.
Storage; Store in accordance with local regulations. Store in a segregated and approved area.Store in
original container, protected from direct sunlight. Eliminate all ignition sources.Separate from oxidizing
materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened
must be carefully resealed and kept upright to prevent leakage.t.
on known or anticipated exposure levels, the hazards of the product and the safe working limits of the
selected respirator.
- Alkyd resin –
Acute toxicity
- Oral; No information found
- Dermal; No information found
- Inhalation; No information found
Skin corrosion/irritation; No information found
Serious eye damage/irritation; No information found
Respiratory or skin sensitization; No information found
Germ cell mutagenicity; No information found
Carcinogenicity; No information found
Reproductive toxicity; No information found
Specific target organ toxicity (single exposure); No information found
Specific target organ toxicity (repeated exposure); No information found
Aspiration hazard; No information found
- Toluene -
Acute toxicity
- Oral; LD50 2600 ㎎/㎏ (rat)
- Dermal; LD50 120000 ㎎/㎏ (rat)
- Inhalation; LC50 12.5 ㎎/ℓ 4 hr (rat)
Skin corrosion/irritation; 2
Serious eye damage/irritation; 2A
Respiratory or skin sensitization; No information found
Germ cell mutagenicity; No information found
Carcinogenicity; No information found
Reproductive toxicity; 1A
Specific target organ toxicity (single exposure); 3 (Respiratory tract irritation, Narcotic effects)
Specific target organ toxicity (repeated exposure); 1
Aspiration hazard; 1
- Xylene -
Acute toxicity
- Oral; LD50 3500 ㎎/㎏ (rat)
- Dermal; LD50 ≥ 4350 ㎎/㎏ (rabbit)
- Inhalation; LC50 6700 ppm 4 hr (rat)
Skin corrosion/irritation; Using a rabbit skin irritation test results and causes irritation of the middle.
PRODUCT NAME PAGE
Serious eye damage/irritation; Using a rabbit eye irritation test results and causes irritation of the middle.
Respiratory or skin sensitization; No information found
Germ cell mutagenicity; No information found
Carcinogenicity; No information found
Reproductive toxicity; 1B
Specific target organ toxicity (single exposure); 3 (Narcotic effects)
Specific target organ toxicity (repeated exposure); 1
Aspiration hazard; 2
- Dimethyl ether -
Acute toxicity
- Oral; No information found
- Dermal; No information found
- Inhalation; LC50 308 g/㎥(rat)
Skin corrosion/irritation; No information found
Serious eye damage/irritation; No information found
Respiratory or skin sensitization; No information found
Germ cell mutagenicity; No information found
Carcinogenicity; No information found
Reproductive toxicity; No information found
Specific target organ toxicity (single exposure); No information found
Specific target organ toxicity (repeated exposure); No information found
Aspiration hazard; No information found
Toxicity;
- Toluene –
Fish : LC50 8.11 ㎎/ℓ 96 hr
Crustaceans : EC50 3.5 ㎎/ℓ 96 hr (Brown shrimp)
Bird : EC50 9.4 ㎎/ℓ 8 hr
- Xylene –
Fish : LC50 3.3 ㎎/ℓ 96 hr
Crustaceans : LC50 190 ㎎/ℓ 96 hr
Bird : No information found
Persistence and degradability; No information found
PRODUCT NAME PAGE
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved
waste disposal facility. Processing, use or contamination of this product may change the waste
management options. State and local disposal regulations may differ from federal disposal regulations.
Dispose of container and unused contents in accordance with federal, state and local requirements.
This information has been faithfully prepared on the basis of various knowledge and information and is not
to guarantee the quality of this product. Also, this information can be changed without prior notice in
accordance with introduction of new knowledge and test results, etc. For inquiries, please contact us or
the place of product purchase.