Professional Documents
Culture Documents
Adding River Structures To An ICM Model - Adding Bridges To A River - Autodesk
Adding River Structures To An ICM Model - Adding Bridges To A River - Autodesk
Type: Length:
Tutorial 7 min.
Tutorial resources
These downloadable resources will be used to complete this tutorial:
https://www.autodesk.com/learn/ondemand/curated/adding-river-structures-to-an-icm-model/4fBovmlPhv4aZfG5XvHlhS 1/10
5/4/24, 6:55 PM Adding River Structures to an ICM Model - Adding bridges to a river | Autodesk
0:00 / 7:05
Video transcript
00:03
Bridges are critical structures in river modelling and can significantly influence hydraulics.
00:10
Bridges in ICM have 5 sections:
00:15
Contraction reach: Cross section upstream of the bridge.
00:19
US bridge section: Cross section directly upstream side of the bridge.
00:25
DS bridge section: Cross section directly downstream side of the bridge.
00:31
Expansion reach: Cross section downstream of the bridge.
00:36
Deck: Cross section of the bridge deck.
00:40
Cross section lines are required for each of these sections.
00:44
0
US Sign in
For this example, cross-section survey data has already been imported.
Step-by-step guide
https://www.autodesk.com/learn/ondemand/curated/adding-river-structures-to-an-icm-model/4fBovmlPhv4aZfG5XvHlhS 2/10
5/4/24, 6:55 PM Adding River Structures to an ICM Model - Adding bridges to a river | Autodesk
Bridges are critical structures in river modelling and can significantly influence
hydraulics. Bridges in ICM have 5 sections:
Cross section lines are required for each of these sections. For this example, cross-
section survey data has already been imported. To complete this exercise, open the
transportable database .icmt file for this tutorial or continue from the previous lesson.
1. In the Explorer, under the Database, double-click the 1D River Model to open it on
the GeoPlan.
2. In the GeoPlan Tools toolbar, click Find in GeoPlan.
3. In the Quick Find dialog box, in the Name field, type “16DECK”.
4. Click Find.
https://www.autodesk.com/learn/ondemand/curated/adding-river-structures-to-an-icm-model/4fBovmlPhv4aZfG5XvHlhS 3/10
5/4/24, 6:55 PM Adding River Structures to an ICM Model - Adding bridges to a river | Autodesk
8. On the GeoPlan, draw a new link between the two break nodes, from upstream
node 16!US to downstream node 17DS.
In the Properties window for the new bridge link, inline validation errors appear
against all of the empty section data.
11. Using the Select tool, on the GeoPlan, select the new bridge link.
12. From the Model menu, select Bridge > Build sections from lines.
https://www.autodesk.com/learn/ondemand/curated/adding-river-structures-to-an-icm-model/4fBovmlPhv4aZfG5XvHlhS 4/10
5/4/24, 6:55 PM Adding River Structures to an ICM Model - Adding bridges to a river | Autodesk
The Bridge Operation report displays information on how it has associated the cross
section data.
The inline validation messages remain due to the missing roughness values.
The next step is to add bridge openings, so that water can flow through.
15. From the GeoPlan Tools toolbar, expand the New Object Type combo box.
16. Select Line.
17. Click Create New Object.
18. On the GeoPlan, draw a bridge opening downstream from left to right parallel to, or
on top of, the bridge link—as close as you can to the center line.
Note: This line must extend slightly beyond both the upstream 16US and downstream
16DS cross sections.
19. Double click the final point to finish digitizing the line.
20. In the New Line popup, add the name “Opening_1”.
21. Set the Type to Bridge opening.
22. Click OK.
In the Properties window for the new Bridge opening, set the following parameters:
https://www.autodesk.com/learn/ondemand/curated/adding-river-structures-to-an-icm-model/4fBovmlPhv4aZfG5XvHlhS 5/10
5/4/24, 6:55 PM Adding River Structures to an ICM Model - Adding bridges to a river | Autodesk
The upstream and downstream invert levels are the same as those of the upstream
and downstream bridge face cross sections.
To resolve this error, insert the opening into the bridge section:
Notice that the opening is now trimmed to the bridge face cross sections.
https://www.autodesk.com/learn/ondemand/curated/adding-river-structures-to-an-icm-model/4fBovmlPhv4aZfG5XvHlhS 6/10
5/4/24, 6:55 PM Adding River Structures to an ICM Model - Adding bridges to a river | Autodesk
The Bridge opening can now be viewed by going to the Bridge Properties window.
There are roughness validation errors for the US bridge section data and DS bridge
section data fields. There may also be another error, such as “d/s bed is at or above
soffit of opening”. In this example, the error is on the DS bridge section data.
34. In the DS bridge section data field, click the ellipsis (…) button to open the Bridge
section data window.
35. In the graph, make sure the bridge opening is within the channel.
In this example, the opening is not shown in the graph, which means that no flow will
be transferred through the opening.
To fix the error, alter the opening position by first removing the old one, and then
redefining it:
36. Remove the rows with entries in the Opening and Side columns by right-clicking
and selecting Delete Row.
37. In the graph, locate the true left side of the opening.
38. In the table, find the corresponding row. Here, the row is at Offset 3.475 m.
39. For this row, expand the Opening drop-down and select Opening_1.
40. In the Side column, select Left.
41. Right-click the row ID and select Insert Row at Offset.
https://www.autodesk.com/learn/ondemand/curated/adding-river-structures-to-an-icm-model/4fBovmlPhv4aZfG5XvHlhS 7/10
5/4/24, 6:55 PM Adding River Structures to an ICM Model - Adding bridges to a river | Autodesk
42. Since the bridge opening is 23 meters wide, add 23 to the amount in the popup
field. In this case, change 3.475 to 26.475.
On the graph, the opening now appears in the new position, represented by a
rectangle.
Now that the location of the bridge opening is placed properly within the cross
sections, the next step is to build a boundary for the bridge.
47. From the Model menu, select Bridge > Build boundary from section ends.
This boundary signifies that the bridge is not meshed as part of any 2D meshing
process and is the region that will be used for the flood theme.
https://www.autodesk.com/learn/ondemand/curated/adding-river-structures-to-an-icm-model/4fBovmlPhv4aZfG5XvHlhS 8/10
5/4/24, 6:55 PM Adding River Structures to an ICM Model - Adding bridges to a river | Autodesk
Related learning
View View
https://www.autodesk.com/learn/ondemand/curated/adding-river-structures-to-an-icm-model/4fBovmlPhv4aZfG5XvHlhS 9/10
5/4/24, 6:55 PM Adding River Structures to an ICM Model - Adding bridges to a river | Autodesk
Industry:
Site Development (General civil engineering), Civil / Site development contractors
Role:
Civil engineer (Hydrology / hydraulics)
Privacy | Do not sell or share my personal information | Cookie preferences | Report noncompliance | Terms
of use | Legal | © 2024 Autodesk Inc. All rights reserved
https://www.autodesk.com/learn/ondemand/curated/adding-river-structures-to-an-icm-model/4fBovmlPhv4aZfG5XvHlhS 10/10