Professional Documents
Culture Documents
SUEZ OptiSperse HP3100 L
SUEZ OptiSperse HP3100 L
SUEZ OptiSperse HP3100 L
fact sheet
internal boiler treatment
• Minimises corrosion Check with your local SUEZ representative to
• Improves boiler reliability determine the specific conditions in your system in
order to define the optimum dosing point.
• Suitable for FDA applications
Feed rate - Sufficient OptiSperse HP3100 should be
description and use fed to maintain the recommended boiler water
phosphate residual. The product is formulated for
OptiSperse HP3100 is an alkaline liquid blend of specific operating conditions. The feed rate depends
phosphate. The products buffering capacity is upon operating pressure, heat transfer rate and
determined by its specific sodium to phosphate ratio. feedwater quality.
OptiSperse HP3100 is used in boilers that are fed with Dilution - OptiSperse HP3100 can be fed neat or
high quality water such as demineralised, mixed bed, diluted to any convenient strength using
double pass RO, EDI and condensate. demineralised water or condensate. When the
A separate feed of an organic oxygen scavenger and product is fed direct to the boiler drum it must be
neutralising amine may be required to give a complete diluted. Agitation should be provided.
boiler water treatment programme. Equipment - All chemical feeding equipment and
All the ingredients in OptiSperse HP3100 are listed in feedlines should be of 304 or 316 stainless steel
FDA 21CFR173.310 - boiler water additives for use in materials. To minimise packing and plunger
the preparation of steam that will contact with food. problems, a diaphragm pump is recommended.
Lenntech
info@lenntech.com
info@lenntech.com Tel.
Tel. +31-152-610-900
+31-152-610-900
www.lenntech.com
www.lenntech.com Fax.
Fax.+31-152-616-289
+31-152-616-289