Professional Documents
Culture Documents
WP ContentuploadsD Series Brochure USA 2013 Rev1 PDF
WP ContentuploadsD Series Brochure USA 2013 Rev1 PDF
WP ContentuploadsD Series Brochure USA 2013 Rev1 PDF
Operating mass
Unladen 28,230 kg (62,236 lb) 29,850 kg (65,808 lb) 32,980 kg (72,708 lb) 34,520 kg (76,104 lb)
Laden 60,730 kg (133,887 lb) 66,851 kg (147,381) 73,980 kg (163,098 lb) 79,920 kg (176,193 lb)
2:1 heaped capacity 20,5 m3 (27 yd3) 23 m3 (30 yd3) 25,5 m3 (33,5 yd3) 28 m3 (37 yd3)
Rated payload 32,500 kg (71,650 lb) 37,000 kg (81,571 lb) 41,000 kg (90,390 lb) 45,400 kg (100,090 lb)
2
Enhancements such as industry leading standards in fuel-efficient
emission control, solid state electrical system, spacious cab with refined controls and you have
everything you need to maximise uptime and productivity.
3
Haul of
Fame
The best-in-class payload-to-weight An industry leading, fully automatic Fully automated controlled traction
ratio means that more of your fuel cost six-speed planetary transmission with differentials and transfer case diff-lock
is spent moving the material, not the torque converter lock up maximizes provide a traction boost in poor
machine - decreasing your cost per fuel efficiency. underfoot conditions.
tonne.
Electronic unit injection fuel system High-travel suspension keeps all tires in
Automatic retardation slows the provides high injection pressures even constant ground contact for optimum
truck when the operator backs off at low engine speed for improved cold- traction.
the accelerator pedal - for more starting ability, low-speed response,
confidence on steep grades and and reduced emissions.
enhanced brake life.
4
4
Bell ADTs give you the competitive edge. Boasting faster haul cycles and industry-
leading fuel economy, they move material at the lowest cost per tonne of any comparable-size truck.
Best in-class payload-to-mass ratio gives you more power and agility to carry the load, for maximum
productivity and profitability. What really sets these apart from other material movers is their ability to
thrive on rough terrain, steep grades and mud. Try one to appreciate the difference.
5
Nothing’s built
as strong as a Be
Built smarter to work harder, these
lean machines boast the material-
moving muscle you need without the
mass to feed.
Their lower mass reduces powertain and structural stress. Other
uptime-boosting features include enhanced diagnostics, solid-state
sealed switches and re-inforced articulation joints to list but a few.
When you know how they’re built, you’ll run a Bell.
The high-strength steel chassis delivers Rough terrain demands tough suspensions. Heavy-duty components absorb shocks
strength and rigidity without excess weight. and come back for more. You get best-in-class ground clearance, too.
6
ell
Efficient viscous direct-drive engine Class leading engine braking coupled Intelligent traction control provides
fans in all Bell trucks provide engine with automated transmission superior traction in poor underfoot
and charge-air cooling. retardation provides superior braking conditions.
power and reduces service brake wear.
Fully enclosed, dual circuit wet disc
brakes offer superior braking Hydraulic, transmission and transfer
performance and extended service life case oil coolers employ a hydraulically
essential for wet and muddy driven fan that runs only as needed or
conditions. Oil-immersed wet-disc when engine loading is low, helping
brakes are virtually maintenance-free. conserve power and fuel.
7
Bringing you
tomorrow’s
technology
today
A combination of an optimally tuned engine
and weight optimized complete machine
package ensure that Bell ADTs have a minimal
carbon footprint.
Reduced emissions
Improved power
Improved torque
With SCR technology customers are able to reduce harmful Nitrogen Oxides while being able to save on
fuel. So Blu@dvantageTM is not just healthy for the environment; it’s healthy for your wallet too.
9
Built for Comfort
What operator wouldn’t want to climb behind the wheel of a Bell
ADT?
It’s spacious, quiet, climate-controlled cab is loaded with productivity-boosting comfort and
convenience features that rival some SUVs.
From the state-of-the-art multifunction monitor and fully customizable controls to air-suspension seat,
tilt/telescoping steering wheel and optional CD player with high-output speakers, the D-series provides
everything your operators need to perform at their best. Unparalleled comfort.
Our innovative
Comfort Ride System...
...is available as an option to even further enhance ride comfort by ensuring minimal whole body vibration
exposure. Productivity increases, through increased cycle times, and reduced haul road maintenance are even
further benefits of the simple, but extremely successful system. Long haul cycles with rough, hard roads will see
maximum benefit, especially on the unladen run.
10
• An intuitive monitor reveals vital
operating information, detailed
diagnostic readings of sensors and
switches and dump body
function settings.
You won’t find retarder pedals or levers in a Bell truck. Retarder aggressiveness
is simply set on the switch pad. Everything else is automatic.
The front suspension consists of an A-frame layout, supported by two The Comfort-Ride option offers dual stage rubber blocks, which change
independent hydro-pneumatic suspension struts. The spring rate and the suspension characteristics to best match the laden and unladen haul
damping is optimally tuned for a perfect combination of machine comfort cycles to maximise operator comfort.
and safe handling experience. 11
Safety is our Busi
too
The exclusive on-board weighing option presents the operator with real time
information on the payload while the machine is being loaded. A ‘speed restriction’
mode can also be activated if the machine is significantly over-loaded.
The park brake automatically applies when neutral is selected and it is not pos-
sible to engage neutral at speed. Torque dependent park brake release (hill assist)
ensures no roll back on slopes.
12
iness
• Keyless start, driver identity, and access
codes ensures no unauthorized operation
of your equipment.
By listening to our
customers and
reacting quicker to a
changing workplace • The incorporation of a Pitch and Roll
sensor in the vehicle allows the bin to not
we provide a vehicle be operated if the truck is in an unsafe
that exceeds position.
application
safety standards.
The engine dipstick and oil fill, oil and • An in-cab load centre simplifies
fuel filters and coolant reservoir are fuse replacement. Fewer
readily accessible. relays, connectors and
harnesses mean higher
Available environmental drains allow reliability.
quick, no-spill changes.
15
Where ever you
are... Planning and Monitoring
Complete Training Solutions
Financing Options
Cutting edge technology, helping you run your fleet smarter. Providing
accurate, up-to-date operational data, production data and diagnostic data.
Machine operational data is processed and compiled into useful production and performance statistics, accessible
via the Bell Fleetm@tic website. These reports are also automated and emailed directly to you. The key to a
productive and profitable fleet, lies in the ability to monitor and manage your machines and operators efficiently.
Fleetm@tic:
Maximise productivity Receive machine health data
3689 (12'1")
TOTAL WIDTH
MIRROR TO MIRROR
6148 (20'2") 518 (1'8")
3056 (10')
7085 (23'3")
BIN WIDTH 5601 (18'5")
GROUND TO BELLY PLATE
70°
GROUND TO AXLE
771 (2'6")
3820 (12'6")
3723 (12'3")
523 (1'9")
3018 (9'11")
2303 (7'7")
1476 (4'10")
1424 (4'8")
(2'11")
886
29°
(2'2")
652
(1'8")
501
2541 (8'4")
TREAD WIDTH 1600 (5'3")
3215 (10'7") 550 1430 (4'8") 1950 (6'5") 4470 (14'8") 2615 (8'7")
WHEEL WIDTH (1'10")
10467 (34'4")
OVERALL LENGTH
INNER BIN WIDTH
2734 (8'12")
NOTE:
ALL DIMENSIONS SHOWN ARE UNLADEN VALUES.
42° FOR ILLUSTRATIVE PURPOSES, AN AVERAGE
TYRE DEFLECTION HAS BEEN TAKEN.
R5055 (R16'7")
INSIDE TURNING RADIUS R9132 (R29'12")
OUTSIDE TURNING RADIUS
NVM GVM
NVM GVM
28,230 kg 60,730 kg
3264 (10'9")
BIN WIDTH 6194 (20'4") 492 (1'7")
GROUND TO BELLY PLATE
7219 (23'8")
5645 (18'6")
70°
GROUND TO AXLE
824 (2'8")
576 (1'11")
3855 (12'8")
3756 (12'4")
3190 (10'6")
2378 (7'10")
1600 (5'3")
1526 (5')
(3'1")
937
30°
(2'8")
803
(1'10")
2606 (8'7")
556
1600 (5'3")
TREAD WIDTH
3357 (11') 624 1450 (4'9") 1950 (6'5") 4471 (14'8") 2615 (8'7")
WHEEL WIDTH (2'1")
10487 (34'5")
OVERALL LENGTH
INNER BIN WIDTH
2920 (9'7")
NOTE:
ALL DIMENSIONS SHOWN ARE UNLADEN VALUES.
FOR ILLUSTRATIVE PURPOSES, AN AVERAGE
42° TYRE DEFLECTION HAS BEEN TAKEN.
R4984 (R16'4")
INSIDE TURNING RADIUS
R9203 (R30'2")
OUTSIDE TURNING RADIUS
NVM GVM
NVM GVM
Retardation 29,850 kg
65,808 lb
66,851 kg
147,381 lb
21
Technical Data - B45D
ENGINE Layout WHEELS Power Down Time
Mercedes Benz OM502LA, V-8, Three in-line helical gears Type 9.9 s (60º tip angle)
Turbocharged and intercooled. Radial Earthmover
Output Differential Tipping Angle
Gross Power Interaxle 33/67 proportional differential, Tire 70º standard, or any lower angle
375 kW (503 hp) @ 1,800 rpm SAE pneumatically spring lockable whilst 29.5R25 programmable.
J1349 stationary or on the move.
Net Power FRont SuSPEnSion PnEumatiC SYStEm
364 kW (488 hp) @ 1,800 rpm AXLES Semi-independent, leading A-frame Air drier with heater and integral
High strength steel fabricated supported by hydro-pneumatic unloader valve, serving park brake
Torque with spiral bevel type gears on the and auxiliary functions.
suspension struts.
2,400 Nm (1,770 lbft) @ 1,200 rpm Controlled Traction differential and
heavy duty outboard planetary gears. System Pressure
Displacement REaR SuSPEnSion 810 kPa (117 psi)
15,93 liters (972 cu.in) Final drive type Pivoting walking beams with
Fuel Tank Capacity Outboard heavy duty planetary on laminated rubber suspension blocks.
ELECTRICAL SYSTEM
575 liters (152 US gal) all axles.
Voltage
AdBlue Tank Capacity Housing type HYDRAULIC SYSTEM 24 V
66 l (17 US gal) Steel fabricated Variable displacement with load
Battery Type
sensing system serving the prioritized
Certification Two maintenance free permanently
steering, body tipping, suspension
OM 502 LA meets EU Stage IIIB/EPA BRAKING SYSTEM sealed.
and brake functions. A ground-driven,
Tier 4i emissions regulations. Service Brake
load sensing emergency steering Battery Capacity
Dual circuit, full hydraulic oil immersed
pump is integrated into the main 2 X 105 Ah
wet multidisc brakes on all three
TRANSMISSION system.
axles. Alternator Rating
Full automatic planetary transmission Pump Type 28 V 80 A
with integral retarder. Maximum Brake Force
Variable displacement, loadsensing
395 kN (88,583 lbf)
Layout piston.
VEhiClE SPEEDS
Engine mounted Park & Emergency
Flow 1st 7 km/h 4 mph
Spring applied, air released driveline
Gear Layout 350 l/min (93 US gal/min) 2nd 14 km/h 9 mph
mounted disc.
Constant meshing planetary gears, 3rd 21 km/h 13 mph
Pressure
clutch operated. Maximum Brake Force 4th 31 km/h 19 mph
25 Mpa (3,626 psi)
440 kN (98,920 lbf)-Static 5th 41 km/h 25 mph
Gears 105 kN (23,605 lbf)-Dynamic Filter 6th 47 km/h 29 mph
6 Forward, 1 Reverse 5 microns R 7 km/h 4 mph
Auxiliary Brake
Clutch Type Automatic exhaust brake
Hydraulically operated multi-disc Engine Valve Brake (EVB). STEERING SYSTEM CAB
Control Type Hydrostatically actuated by two ROPS/FOPS certified
Electronic double acting cylinders, with ground- 74 dBA internal sound level measured
RETARDATION SYSTEM
driven emergency steering pump. according to ISO 6396.
Torque Control Engine Brake
Hydrodynamic, with lock-up in all Automatic exhaust brake and Engine Angle
gears. Valve Brake (EVB) 42º
Maximum Retardation Power Lock to lock turns
TRANSFER BOX 345 kW (463 hp) 4,2
Manufacturer Transmission Retarder
Bell VGR Integral hydrodynamic, output shaft DumPing SYStEm
Model speed dependant, six selectable Two double-acting, single stage,
17 100 levels of retardation dump cylinders.
Total Retardation Power Raise Time
797 kW (1,069 hp) 11.2 s (60º tip angle)
NVM GVM
Gradeability / Rimpull 32,980 kg
72,708 lb
73,980 kg
163,098 lb
NVM GVM
Retardation
32,980 kg 73,980 kg
72,708 lb 163,098 lb
23
Technical Data - B50D
ENGINE Output Differential WHEELS Power Down Time
Mercedes Benz OM502LA, V-8, Interaxle 33/67 proportional differential, Type 9,9 s (60º tip angle)
Turbocharged and intercooled. pneumatically spring lockable whilst Radial Earthmover
Tipping Angle
stationary or on the move.
Gross Power Tire 70º standard, or any lower angle
375 kW (503 hp) @ 1,800 rpm SAE 875/65R29 programmable.
J1349 AXLES
High strength steel fabricated
Net Power FRont SuSPEnSion PnEumatiC SYStEm
with spiral bevel type gears on the
364 kW (488 hp) @ 1,800 rpm Semi-independent, leading A-frame Air drier with heater and integral
Controlled Traction differential and
supported by hydro-pneumatic unloader valve, serving park brake
Torque heavy duty outboard planetary gears.
suspension struts. and auxiliary functions.
2,400 Nm (1,770 lbft) @ 1,200 rpm Final drive type
System Pressure
Displacement Outboard heavy duty planetary on
REaR SuSPEnSion 810 kPa (117 psi)
15,93 liters (972 cu.in) all axles.
Pivoting walking beams with
Fuel Tank Capacity Housing type laminated rubber suspension blocks.
ELECTRICAL SYSTEM
460 liters (122 US gal) Steel fabricated
Voltage
AdBlue Tank Capacity HYDRAULIC SYSTEM 24 V
66 l (17 US gal) BRAKING SYSTEM Full load sensing system serving the
Battery Type
Service Brake prioritized steering, body tipping,
Certification Two maintenance free permanently
Dual circuit, full hydraulic oil immersed suspension and brake functions.
OM 502 LA meets EU Stage IIIB/EPA sealed.
wet multidisc brakes on all three A ground-driven, load sensing
Tier 4i emissions regulations. axles. emergency steering pump is Battery Capacity
integrated into the main system. 2 X 105 Ah
Maximum Brake Force
TRANSMISSION 391 kN (87,686 lbf) Pump Type Alternator Rating
Full automatic planetary transmission Variable displacement, load sensing 28 V 80 A
with integral retarder. Park & Emergency piston.
Spring applied, air released driveline
Layout mounted disc. Flow VEhiClE SPEEDS
Engine mounted with rear output 350 l/min (93 US gal/min) 1st 7 km/h 4 mph
Maximum Brake Force
Gear Layout Pressure 2nd 14 km/h 9 mph
440 kN (98,920 lbf)-Static
Constant meshing planetary gears, 25 Mpa (3,626 psi) 3rd 21 km/h 13 mph
105 kN (23,605 lbf)-Dynamic
clutch operated. 4th 31 km/h 19 mph
Auxiliary Brake Filter 5th 41 km/h 25 mph
Gears Automatic exhaust brake 5 microns 6th 47 km/h 29 mph
6 Forward, 1 Reverse Engine Valve Brake (EVB). R 7 km/h 4 mph
Clutch Type STEERING SYSTEM
Hydraulically operated multi-disc RETARDATION SYSTEM Hydrostatically actuated by two CAB
Control Type Engine Brake double acting cylinders, with ground- ROPS/FOPS certified
Electronic Automatic exhaust brake and Engine driven emergency steering pump. 74 dBA internal sound level measured
Valve Brake (EVB). according to ISO 6396.
Torque Control Angle
Hydrodynamic, with lock-up in all Maximum Retardation Power 42º
gears. 345 kW (463 hp)
Lock to lock turns
Transmission Retarder 4,2
TRANSFER BOX Integral hydrodynamic, output shaft
Manufacturer speed dependant, six selectable
DumPing SYStEm
Bell VGR levels of retardation.
Two double-acting, single stage,
Model Total Retardation Power dump cylinders.
17 100 797 kW (1,069 hp)
Raise Time
Layout 11,2 s (60º tip angle)
Three in-line helical gears
NVM GVM
NVM GVM
34,520 kg 79,920 kg
25
Features and Options
ENGINE CAB
l l l l Wet-sleeve cylinder liners l l l l Retractable seat belt
l l l l Engine valve brake and exhaust brake l l l l Foldaway trainer seat with retractable seat belt
l l l l Dual-element air cleaner with dust ejector valve l l l l 12-volt power outlet
l l l l Precleaner l l l l Cup holder
l l l l Water separator l l l l Cooled/heated lunch box
l l l l Provision for fast fill l l l l Ashtray
l l l l Serpentine drive belt with automatic tensioner l l l l Electric adjustable and heated mirrors
l l l l Deluxe monitor:
COOLING Analog speedometer / Fuel gauge /
l l l l Crankshaft-mounted viscous-drive fan Transmission oil temperature gauge /
l l l l Remote proportionally controlled hydraulic fan Engine coolant temperature gauge /
drive LED function/warning indicators and audible
l l l l Fan guard alarm / Transmission gear selection /
Tachometer / Battery voltage / Hour meter /
PnEumatiC SYStEm Odometer / Fuel consumption / Tip counter /
l l l l Engine-mounted compressor Trip timer / Trip distance / Metric/English units /
l l l l Air drier with heater Service codes/diagnostics
l l l l Integral unloader valve Backlit sealed switch module functions:
Wiper control / Lights / Heated mirrors /
ELECTRICAL SYSTEM Retarding aggressiveness / Controlled traction
l l l l Battery disconnect differentials (B35D/B40D/B50D) / Transfer case
l l l l Drive lights differential lock / Transmission gear hold /
s s l l Deluxe work lights Dump-body tip limit / Automatic dump-body
l l l l Electric Hooter tip settings / Airconditioner/ Heater controls /
l l l l Air Horn Preselected Speed Control
l l l l Reverse alarm
l l l l Rotating Beacon DumP BoDY
l l l l Pitch Roll Sensor l l l l Dump-body mechanical lock
s s s s Body liner
STEERING SYSTEM s s s s Tailgate
l l l l Ground-driven secondary steering pump s s s s Body heater
s s s s Less dump body and cylinders
CAB
l l l l ROPS/FOPS certification OTHER
l l l l Tilt cab l 26.5R25 radial earthmover tires
l l l l Gas strut-supported door l l s 29.5R25 radial earthmover tires
l l l l I-Tip programmable dump-body tip settings s l 875/65R29 radial earthmover tires
l l l l Air conditioner l l Remote grease banks
l l l l Heater s s l l Automatic greasing
l l l l AM/FM radio/CD player l l l l Onboard Weighing
l l l l Rear window guard s s s s Load lights
l l l l Wiper/washer with intermittent control s s s s Comfort Ride Suspension
l l l l Tilt and telescoping steering wheel l l l l Reverse Camera
l l l l Centre-mount air-suspension seat s s s s Hand Rails
l l l l Rear window wiper s s l l Cab Peak
26
Notes
27
Broch13900713, D-series ADT (B35-B50D) Mk7 Stage 3b, Rev 3-English BENA
All dimensions are shown in millimetres, unless otherwise stated between brackets. BELL INTERNATIONAL: Tel: +27 (0) 35-907 9431
Under our policy of continuous improvement, we reserve the right to change technical data
and design without prior notice. Photographs featured in this brochure may include optional
E-mail: marketing@bellequipment.com Web: www.bellequipment.com
equipment. Blu@dvantage™ is a trademark of Bell Equipment Co. (PTY) Ltd.
AdBlue™ is a registered trademark of VDA.
Tel: +61 (0) 8-9356-1033 Tel: +33 (0) 5-55-89-23-56
Tel: +49 (0) 6631 / 91-13-0 Tel: +7-495-287-80-02
Tel: +27 (0) 11-928-9700 Tel: +34-91-879-60-19
Tel: +44 (0) 1283-712862 Tel: +1-855-494-2355