Professional Documents
Culture Documents
50 Horas
50 Horas
50 Horas
SMCS -
(6)Zinc Plugs
Salt Water Applications Only
PPI
1. Move the battery disconnect switch to the OFF position.
-
202 007 0
2. Remove all the zinc plugs. They are painted red for easy identification.
3
03: 11/2 37B
/ 2
0 5
SEB :50- 2
U
© 2 579 3:00 0
3. Tap the zinc rods lightly with a hammer. If the rod has deteriorated, or flakes when tapped, install a new zinc rod.
https://sis2.cat.com/#/print-preview/service/6c0657ed-41e5-46a4-a484-75c417987a11 1/2
22/11/23, 0:05 SIS 2.0
(7)Batteries
1. Clean the top of the batteries and remove the fill caps. Observe electrolyte level.
2. Maintain the electrolyte level to the bottom of filler openings. Use distilled water.
3. If the battery posts and cable clamps are corroded, clean them with a solution of baking soda and water.
4. Tighten the clamps and coat them and the battery posts with grease.
PPI-0007237B
2023/11/22
03:05:45-03:00
SEBU57910013
© 2023 Caterpillar Inc.
https://sis2.cat.com/#/print-preview/service/6c0657ed-41e5-46a4-a484-75c417987a11 2/2