(Electrical Installation and Maintenance) Short Quiz Name: ____________________________ _______ Score: _________ Year and Section: __________________________ Date: _________ Test – I. Multiple choices: _________1. Uses compressed air to flow into the jack cylinder and cause the arm to extend and raise the vehicle. a) Air racket c) Air drill b) Pneumatic floor jack d) Air chisel _________2. Tools manipulated by our hands without using electrical energy a) Machine / Power tools c) Pneumatic tools b) Hand tools d) Screwdrivers _________3. Are used to drive or turn screws. The common type has a single flat blade for driving screw with slotted heads. a) Hammers c) Pliers b) Screwdrivers d) Pullers _________4. A tool used to turn screw, nuts and bolts with hexagonal or six sided heads a) Screwdrivers c) Pliers b) Wrenches d) Hand tools _________5. A tool used to remove gears and hubs from shafts, bushing from blind holes, and cylinders lines from the engine blocks a) Wrenches c) Machine/Power tools b) Pullers d) Grinding disc _________6. Used for cleaning the floor and car interiors after service. a) Pneumatic torque wrench c) Vacuum cleaner b) Air chisel d) Air racket _________7. This is lighter than a comparable electric drill. a) Air chisel c) Air drill b) Air racket d) Grinding disc _________8. A gadget that protects workers from injury or illness caused by having contact with the dangers in the workplace. a) Keep the tool clean c) Personal Protective Equipment (PPE) b) Check the cords d) Protect your tools _________9. This wrench uses compressed air to quickly and powerfully turn nuts, bolts and other objects. a) Air chisel c) Pneumatic Torque Wrench b) Air drill d) Pneumatic floor jack _________10. These are tools manipulated by our hands and with the use of electrical energy. a) Machine/Power tools c) Hand tools b) Pneumatic tools d) Screwdrivers