Professional Documents
Culture Documents
Lab 2 Report - Template - ENGG2560
Lab 2 Report - Template - ENGG2560
Student Name:
Introduction: Only write 5-6 lines in introduction section.
Methodology: 10-15 lines about how you performed the experiment. Just mention briefly and
don’t overwrite.
0.800
0.600
0.400
0.200
0.000
0.0 2.0 4.0 6.0 8.0 10.0 12.0
Concentration (mg/L)
30
25
20
15
10
0
e 5 5 5 5 .5 .5 .5 .5 .5 .5 .5 .5
m 0. 3. 6. 9. 12 15 18 21 24 27 30 33
Ti
10
Concentration (mg/L)
0
0 1 2.5 4 5.5 7 8.5 1011.51314.51617.51920.52223.52526.52829.53132.53435.5
Time (min)
12
10
Concentration (mg/L)
0
0 1.5 3 4.5 6 7.5 9 10.5 12 13.5 15 16.5 18 19.5 21 22.5 24 25.5 27 28.5 30 31.5 33 34.5 36
-2
Time (min)
Include:
1) Calibration curve
2) Report your flowrates
3) Plot the measured concentration values entering the reactors, inside the reactors and at the
outlet of the reactors as a function of time
4) Write a mass balance equation for each reactor and for the entire system, and find the
theoretical concentrations exiting each reactor, using the measured concentration entering the
first reactor
5) Plot the theoretical concentrations exiting each reactor and the overall system over time, using
the measured concentration entering the first reactor
6) Compare the theoretical concentrations with the measured concentrations and discuss
potential sources of error
5. References: If any