Professional Documents
Culture Documents
单功能可拔插【980方正黑白】溶脂30-英文 (1) (2024-04-14 20 - 39 - 53)
单功能可拔插【980方正黑白】溶脂30-英文 (1) (2024-04-14 20 - 39 - 53)
Manual
(Power:30W)
-1-
When using the
lipolysis function, it
must be handled by
a professional
physician.
This instrument
does not assume
responsibility for
medical risks! !
-2-
Attention
Respected user:
Thank you for choosing the instruments which carefully designed and manufactured by our company.
◆◆ Please install, use and operate correctly according to the requirements in the manual.
◆◆ Except for authorized personnel of the company, it is strictly forbidden to open the cover and
Safety Precautions
◆◆ The naked eyes cannot directly look at the direction in which the laser is thrown.
◆◆ Laser projection can not be aligned with any part of the human body or flammable items.
◆◆ The laser output can be viewed from the side of the phone camera.
◆◆ Operation must be in accordance with the national laser operation level IV to protect.
Due to continuous improvement, update, and replacement of the product, the products
received may not be exactly same as the illustration in the manual. We sincerely apologize.
-3-
980nm lipolysis diode laser machine
【1】、Product appearance(For reference only, subject to the actual product)
【2】、Part lists:
【3】、Treatment theory:
The semiconductor laser therapy device uses a 980nm wavelength fiber-coupled laser to treat the
needle with a disposable lipolysis fiber, precisely locates excess fat and fat in the body, directly hits
the target tissue fat cells, and rapidly dissolves and liquefies. The instrument mainly acts on deep
-4-
fat and superficial fat, and transfers the energy directly to the fat cells for uniform heating. During
the heating process, the connective tissue and fat cell structure can be changed by controlling the
heat, and the adipose tissue has a photothermal effect (so that the fat is dissolved). And the
photodynamic effect (separating the fat cells from the normal tissue) decomposes the fat cells to
make them evenly liquefied, and the fat liquid is excreted through the ultra-fine positioning needle,
which fundamentally reduces the number of fat cells, effectively avoids postoperative rebound.
1) Accurately remove stubborn fat from the abdomen, arms, buttocks, thighs, etc.
2) It can also be refined and dissolved in parts that cannot be reached by traditional methods such
as jaw and neck.
3) Facial lifting, firming and wrinkle removal.
【5】、Technology Parameters:
⑥
○
3
○
2 ○
1
○
7 ○
○
5 ○
4 8 ⑨
-5-
Structure: ①Key switch ②Touch screen ③Emergency stop button ④Foot switch
⑤Laser output port ⑥Lipolysis fiber ⑦Ice compress hammer outlet(optional)
⑧Power outlet ○
9 Foot switch outlet
【Pay attention】
A. After use, be sure to install a protective sleeve on the fiber output port
to prevent dust and contamination of the laser.
-6-
B. Laser lipolysis must be performed under the operation of a
professional physician.
C. When replacing the optical fiber, be sure to tighten it, but do not use
too much force. Do not touch the optical fiber input port and optical fiber
output port with your hands! So as not to get into the dust.
【8】、Touch screen:
Number of lasers
turned on this
time
Power adjust Total number of
lasers turned on
Pulse adjust
Aiming lamp
Brightness Frequency adjust
adjust
Start Pause
【9】、Operate guide:
(1)After power-on, do not look directly at the hand piece plug with the naked eye, the 980nm output
light is invisible! However, the damage caused by the laser to the eyes is irreversible and can be
(2)Connect the power cord and press the key button to turn it on. After the startup interface is
automatically loaded, it will enter mode selection page by default, click the desired mode button to
enter the corresponding mode operation page. If you need to enter the pulse mode page you can click
the button, the output laser mode is pulse output. If you need to enter the continuous
output page, you can click the button. The output laser mode is continuous output. In this
mode, the value of frequency and pulse width cannot be adjusted, only the power.
-7-
(3)Setup parameters: Set each parameter in pause state. (The setting parameters are invalid after
●Setup Pulse: Click the pulse width adjustment button + or - pulse width value.
The highest value is 60ms.
●Current times: Display value The number of lasers emitted after this power-on. It is
automatically cleared after shutdown.
●Total times: The displayed value is the total number of lasers emitted by the machine
and will not be cleared after shutdown. If you need to clear, you can press and hold the display value.
(4)After the setting is completed, click the button and step on the foot switch to
start working. To pause or adjust the parameters, press the button to stop working
and enter standby mode.
【10】、Instrument maintenance and care
(1)The optical fiber is easily broken. It is forbidden to bend less than the minimum radius of the bend
when laying. It is forbidden to pile up pressure on the optical fiber. It is forbidden to step on the foot.
The optical fiber is lightly handled when laying. It is forbidden to pull hard.
(2)This instrument is strictly prohibited to be dismantled. Please contact us if there is any trouble.
(3)In order to ensure the normal use of the instrument, purchase or replacement of the spare parts of
the instrument, please contact the company directly.
【 Attention 】 The customer only needs to carry out daily cleaning and maintenance of the
instrument or the simple fault elimination under the guidance of our company's engineering
personnel. Other maintenance work should be performed by the company's technical staff.
【Warning】 Before you maintain this instrument, you must turn off the power and dial out the
-8-
1. When replacing fiber optic hand tools and surgical fibers , must
ensure the surrounding environment is clean, washing hands and keep dry, change it fast, do
not pollute the laser and fiber port with dust during this processing.
2. The fiber port and the laser outlet can not be exposed in normal time. Must be tightened.
The most safety way is confirming the optical fiber is clean under the microscope. If there is
any dirt, you must wipe the optical fiber head clean with professional optical fiber wiping paper
or cleaning cloth.
3. Before opening machine, please ensure the fiber is connected correctly with host.
A. When the fiber cap on the host is not unscrewed, do not output laser!
B. When finish use , be sure to install a protective cover on the laser output port and fiber port
4. When replacing the optical fiber, making sure to tighten it, but do not use too much force. Do
not touch the laser output port and fiber optic port! (Picture 1) In order to avoid dust, the process
5. Confirm the cleanliness of the fiber end face of the hand tool under the microscope. If there is
any dirt, please wipe the fiber port with a professional wet wipe and a professional fiber cleaning
cloth.
Again: the process of connecting or replacing the fiber must be fast and dust-free.
Must be operated in a clean environment. Do not contaminate the end face, otherwise the hand
tool or optical fiber will burn out, laser will burn out in the same time.
Laser burnout is not covered by the warranty, the replacement cost is very high.
-9-