Professional Documents
Culture Documents
Chorus2 Kino2 FT V003 Sample
Chorus2 Kino2 FT V003 Sample
Sort Number
Fail Result Comment Arg15 Arg16 Arg17 Arg18 Arg19 Arg20 Arg21 Arg22
0
200 Fail
300 Fail
400 Fail confirms sucessful memory repair
500 Fail Obsolete
600 Fail SAME AS REVB, DIFFERENT NAME,DC VALUES
610 Fail SAME AS REVB, DIFFERENT NAME,DC VALUES
620 Fail SAME AS REVB, DIFFERENT NAME,DC VALUES
630 Fail SAME AS REVB, DIFFERENT NAME,DC VALUES
700 Fail
710 Fail
720 Fail
730 Fail
900 Fail
1000 Fail
1100 Fail
1400 Fail
1440 Fail
800 Fail
1200 Fail
1210 Fail
1220 Fail
1300 Fail
1820 Fail
Arg23 Arg24 Arg25 Arg26 Arg27 Arg28 Arg29 Arg30 Arg31 Arg32 Arg33 Arg34 Arg35 Arg36
Arg37 Arg38 Arg39 Arg40 Arg41 Arg42 Arg43 Arg44 Arg45 Arg46 Arg47 Arg48 Arg49 Arg50
Arg51 Arg52 Arg53 Arg54 Arg55 Arg56 Arg57 Arg58 Arg59 Arg60 Arg61 Arg62 Arg63 Arg64
Arg65 Arg66 Arg67 Arg68 Arg69 Arg70 Arg71 Arg72 Arg73 Arg74 Arg75 Arg76 Arg77 Arg78
Arg79
Sort Number
Pass Fail Result Comment Arg15 Arg16 Arg17 Arg18 Arg19 Arg20
0
200 Fail
1850 Fail
1870 Fail
1810 Fail
Writes all zeros to the novea memory (conditioning for bist test)
1120 Fail Performs bist, rejects parts with failures in non-repairable memories, calculates repair signature and optionally updates NOVEA
1200 Fail confirms sucessful memory repair
9 Fail Obsolete
5 Fail Low voltage applied to vcore, pre-conditioning for other POR tests, does not check RSTN output state
5 Fail second POR test (sequence important) test RSTN low with vcore close to min threshold
5 Fail third POR test (sequence important) test RSTN low with vcore close to upper threshold
5 Fail Fourth POR test (sequence important) test RSTN high with vcore above upper threshold
4 Fail SMPS test with feedback forced high, therefore turning off the external FET and giving ~0v output
4 Fail SMPS test with feedback forced low, therefore turning on the external FET and giving ~3v output
4 Fail SMPS test with vsense high - no over current therefore 3.3v output expected
4 Fail SMPS test with vsense low - over current detection therefore 0v output expected
15 Fail ADC test - calculates SNR & THD
3 Fail Runs Nand pattern, stops at IDDQ section and makes current measurement
12 Fail Nand tree test for Kino2 - with more aggressive thresholds
1380 Fail Obsolete
1700 Fail PLL frequency measurement
1440 Fail
13 Fail Audio filter left channel SNR & THD
13 Fail Audio filter right channel SNR & THD
7 Fail Audio filter VCO frequency measurement
6 Fail
6 Fail
6 Fail
6 Fail
6 Fail
Arg21 Arg22 Arg23 Arg24 Arg25 Arg26 Arg27 Arg28 Arg29 Arg30 Arg31 Arg32 Arg33
y updates NOVEA
Arg34 Arg35 Arg36 Arg37 Arg38 Arg39 Arg40 Arg41 Arg42 Arg43 Arg44 Arg45 Arg46
Arg47 Arg48 Arg49 Arg50 Arg51 Arg52 Arg53 Arg54 Arg55 Arg56 Arg57 Arg58 Arg59
Arg60 Arg61 Arg62 Arg63 Arg64 Arg65 Arg66 Arg67 Arg68 Arg69 Arg70 Arg71 Arg72
Sort Number
Pass Fail Result Comment Arg15 Arg16 Arg17 Arg18 Arg19 Arg20
0
200 Fail
1850 Fail
1870 Fail
1810 Fail
Writes all zeros to the novea memory (conditioning for bist test)
1120 Fail Performs bist, rejects parts with failures in non-repairable memories, calculates repair signature and optionally updates NOVEA
1200 Fail confirms sucessful memory repair
1380 Fail Obsolete
650 Fail Low voltage applied to vcore, pre-conditioning for other POR tests, does not check RSTN output state
700 Fail second POR test (sequence important) test RSTN low with vcore close to min threshold
750 Fail third POR test (sequence important) test RSTN low with vcore close to upper threshold
800 Fail Fourth POR test (sequence important) test RSTN high with vcore above upper threshold
450 Fail SMPS test with feedback forced high, therefore turning off the external FET and giving ~0v output
500 Fail SMPS test with feedback forced low, therefore turning on the external FET and giving ~3v output
550 Fail SMPS test with vsense high - no over current therefore 3.3v output expected
600 Fail SMPS test with vsense low - over current detection therefore 0v output expected
1300 Fail ADC test - calculates SNR & THD
1400 Fail Runs Nand pattern, stops at IDDQ section and makes current measurement
1330 Fail Nand tree test for Kino2 - with more aggressive thresholds
1380 Fail Obsolete
1700 Fail PLL frequency measurement
300
300 Fail
1450 Fail Audio filter left channel SNR & THD
1500 Fail Audio filter right channel SNR & THD
1550 Fail Audio filter VCO frequency measurement
1830 Fail
1840 Fail
1880 Fail
1890 Fail
2300 Fail
1200 Fail PLL frequency measurement
1
Arg21 Arg22 Arg23 Arg24 Arg25 Arg26 Arg27 Arg28 Arg29 Arg30 Arg31 Arg32 Arg33
y updates NOVEA
Arg34 Arg35 Arg36 Arg37 Arg38 Arg39 Arg40 Arg41 Arg42 Arg43 Arg44 Arg45 Arg46
Arg47 Arg48 Arg49 Arg50 Arg51 Arg52 Arg53 Arg54 Arg55 Arg56 Arg57 Arg58 Arg59
Arg60 Arg61 Arg62 Arg63 Arg64 Arg65 Arg66 Arg67 Arg68 Arg69 Arg70 Arg71 Arg72
set_up IG-XL Template Empty_T Excel Macro DC-Std DC-Typ USB12 AC-Typ
VBUS_LT_800_addvbus IG-XL Template Functional_T Excel Macro DC-Ana DC-Min USB12 AC-Typ
VBUS_GT_800_addvbus IG-XL Template Functional_T Excel Macro DC-Ana DC-Typ USB12 AC-Typ
VBUS_GT_4400_addvbus IG-XL Template Functional_T Excel Macro DC-Ana DC-Max USB12 AC-Typ
VBUS_GT_4400_addvbus_RBIA IG-XL Template Functional_T Excel Macro DC-Ana DC-Max USB12 AC-Typ
USB_VBUS_check_current IG-XL Template BoardPmu_T Excel Macro DC-Ana DC-Typ USB12 AC-Typ
Gain_Osctrial IG-XL Template PinPmu_T Excel Macro DC-Ana DC-Typ F_24M576 AC-Typ
Gain_Osc_retest IG-XL Template BoardPmu_T Excel Macro DC-Ana DC-Typ F_24M576 AC-Typ
Sheet Parameters
Time Sets Edge Sets Pin Levels Overlay Comment Arg64 Arg65 Arg66
levels_conty UNISEM standard continuity test
levels_conty UNISEM standard continuity test
UNISEM standard continuity test
UNISEM standard continuity test
UNISEM standard continuity test
UNISEM standard continuity test
levels_conty UNISEM standard continuity test
levels_conty UNISEM standard continuity test
levels_conty UNISEM standard continuity test
levels_conty UNISEM standard continuity test
levels_conty UNISEM standard continuity test
levels_conty UNISEM standard continuity test
levels_conty UNISEM standard continuity test
ts_conty levels_conty UNISEM standard continuity test
ts_conty levels_conty UNISEM standard continuity test
ts_conty levels_std UNISEM standard continuity test
ts_conty levels_std UNISEM standard continuity test
ts_conty levels_std UNISEM standard continuity test
ts_conty levels_std
ts_conty levels_std
tset_xtal levels_std System Osc gain - measures max current with input low
tsb_POR levels_std Low voltage applied to vcore, pre-conditioning for other POR tests, does not check RSTN output state
tsb_POR levels_std second POR test (sequence important) test RSTN low with vcore close to min threshold
tsb_POR levels_std third POR test (sequence important) test RSTN low with vcore close to upper threshold
tsb_POR levels_std Fourth POR test (sequence important) test RSTN high with vcore above upper threshold
tsb_scan levels_std Need to reduce to one (poss two) ATPG tests
tsb_bist levels_std confirms sucessful memory repair
tsb_dummy levels_std
tsb_NAND_SHORT levels_std
levels_std
tsb_NAND_SHORT levels_std Nand tree test for Kino2 - with more aggressive thresholds
tsb_NAND_SHORT levels_std Nand tree test for Kino2
tsb_NAND_SHORT levels_std Nand tree test for Chorus2
tsb_NAND_SHORT levels_std Nand tree test for Chorus2 - with more aggressive thresholds
tsb_NAND_SHORT levels_std Runs Nand pattern, stops at IDDQ section and makes current measurement
levels_std
levels_std
tsb_bist levels_std Performs bist, rejects parts with failures in non-repairable memories, calculates repair signature and optionally
tsb_adc levels_std ADC test - calculates SNR & THD
tset_pll levels_std PLL frequency measurement - why not dc-std?
tsb_audio levels_std Audio filter left channel SNR & THD
tsetsmps_kino2 levels_std
tsetsmps_kino2 levels_std VBUS comparitor test for <0.8v
tsetsmps_kino2 levels_std VBUS comparitor test for >0.8v
tsetsmps_kino2 levels_std VBUS comparitor test for >0.8v
tsetsmps_kino2 levels_std VBUS comparitor test for >0.8v
tsetsmps_kino2 levels_std USB vbus charge test
tset_xtal levels_std
tset_xtal levels_std System Osc gain - measures max current with input low
Arg67 Arg68 Arg69 Arg70 Arg71 Arg72 Arg73 Arg74 Arg75 Arg76 Arg77 Arg78 Arg79 Comment
per threshold
IO VCH 7.6
IO VCL -2.6
IO Vph 5
IO Iph 0
IO Tpr 0.000016
Lev_Dummies VDriveLo #NAME?
Lev_Dummies VDriveHi #NAME?
Lev_Dummies VCompareLo #NAME?
Lev_Dummies VCompareHi #NAME?
Lev_Dummies ISource #NAME?
Lev_Dummies ISink #NAME?
Lev_Dummies VThreshold #NAME?
Lev_Dummies VCH 7.6
Lev_Dummies VCL -2.6
Lev_Dummies Vph 5
Lev_Dummies Iph 0
Lev_Dummies Tpr 0.000016
JTAG_GR VDriveLo #NAME?
JTAG_GR VDriveHi #NAME?
JTAG_GR VCompareLo #NAME?
JTAG_GR VCompareHi #NAME?
JTAG_GR ISource #NAME?
JTAG_GR ISink #NAME?
JTAG_GR VThreshold #NAME?
JTAG_GR VCH 7.6
JTAG_GR VCL -2.6
JTAG_GR Vph 5
JTAG_GR Iph 0
JTAG_GR Tpr 0.000016
MEM_CTRL VDriveLo #NAME?
MEM_CTRL VDriveHi #NAME?
MEM_CTRL VCompareLo #NAME?
MEM_CTRL VCompareHi #NAME?
MEM_CTRL ISource #NAME?
MEM_CTRL ISink #NAME?
TFT_GR Iph 0
TFT_GR Tpr 0.000016
ATA_GR VDriveLo #NAME?
ATA_GR VDriveHi #NAME?
ATA_GR VCompareLo #NAME?
ATA_GR VCompareHi #NAME?
ATA_GR ISource #NAME?
ATA_GR ISink #NAME?
ATA_GR VThreshold #NAME?
ATA_GR VCH 7.6
ATA_GR VCL -2.6
ATA_GR Vph 5
ATA_GR Iph 0
ATA_GR Tpr 0.000016
USB_GR VDriveLo #NAME?
USB_GR VDriveHi #NAME?
USB_GR VCompareLo #NAME?
USB_GR VCompareHi #NAME?
USB_GR ISource #NAME?
USB_GR ISink #NAME?
USB_GR VThreshold #NAME?
USB_GR VCH 7.6
USB_GR VCL -2.6
USB_GR Vph 5
USB_GR Iph 0
USB_GR Tpr 0.000016
CH_MEM VDriveLo 0
CH_MEM VDriveHi #NAME?
CH_MEM VCompareLo #NAME?
CH_MEM VCompareHi #NAME?
CH_MEM ISource #NAME?
CH_MEM ISink #NAME?
CH_MEM VThreshold #NAME?
CH_MEM VCH 7.6
CH_MEM VCL -2.6
CH_MEM Vph 5
CH_MEM Iph 0
CH_MEM Tpr 0.000016
TEST VDriveLo #NAME?
TEST VDriveHi #NAME?
TEST Vph 5
TEST Iph 0
TEST Tpr 0.000016
USB_VBUS1 VDriveLo #NAME?
USB_VBUS1 VDriveHi #NAME?
USB_VBUS1 VCompareLo #NAME?
USB_VBUS1 VCompareHi #NAME?
USB_VBUS1 ISource #NAME?
USB_VBUS1 ISink #NAME?
USB_VBUS1 VThreshold #NAME?
USB_VBUS1 VCH 7.6
USB_VBUS1 VCL -2.6
USB_VBUS1 Vph 5
USB_VBUS1 Iph 0
USB_VBUS1 Tpr 0.000016
USB_XIN VDriveLo #NAME?
USB_XIN VDriveHi #NAME?
USB_XIN VCompareLo #NAME?
USB_XIN VCompareHi #NAME?
USB_XIN ISource #NAME?
USB_XIN ISink #NAME?
USB_XIN VThreshold #NAME?
USB_XIN VCH 7.6
USB_XIN VCL -2.6
USB_XIN Vph 5
USB_XIN Iph 0
USB_XIN Tpr 0.000016
USB_RBIAS VDriveLo #NAME?
USB_RBIAS VDriveHi #NAME?
USB_RBIAS VCompareLo #NAME?
Compare
Off Mode Open Close Comment
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
Compare
Off Mode Open Close Comment
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
Compare
Off Mode Open Close Comment
0.0000001 Off 0 analogue
0.0000001 Off 0 analogue
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
0.0000001 Edge 0.6*_CYCLE 8mA with optional Pull Up
Compare
Off Mode Open Close Comment
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
0.0000001 Edge 0.000000008
Compare
Off Mode Open Close Comment
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
Compare
Off Mode Open Close Comment
0.000001 Edge 0.0000009
Compare
Off Mode Open Close Comment
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
Compare
Off Mode Open Close Comment
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
Compare
Off Mode Open Close Comment
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
Compare
Off Mode Open Close Comment
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
Compare
Off Mode Open Close Comment
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
Compare
Off Mode Open Close Comment
0.0000001 Off 0.000000008
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
0.0000001 Off 0.6*_CYCLE
Compare
Off Mode Open Close Comment
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
Compare
Off Mode Open Close Comment
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
Compare
Off Mode Open Close Comment
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
Compare
Off Mode Open Close Comment
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
Comment
Compare
Off Mode Open Close Comment
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
0.0000001 Off 0.0000001
Compare
Off Mode Open Close Comment
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
0.0000001 Off 0.000000008
DFF 1. AC Specs
Selector SQUARER bist ContinuityF_10M Scan25 USB12 ADC F_24M576
Symbol Value Name Val Typ Typ Typ Typ Typ Typ Typ Typ Comment
FREQ ### AC-Typ Typ ### ### ### ### ### ### ### ###
CYCLE ### AC-Typ Typ ### ### ### ### ### ### ### ###
STROBE_EA 0.6*_C AC-Typ Typ #N/A #N/A #N/A 0.20*_ ### ### 0.6*_C 0.9*_C use with high drive outputs (Scantest only at present)
STROBE 0.6*_C AC-Typ Typ #N/A #N/A #N/A 0.20*_ ### ### 0.6*_C 0.9*_C use with 4mA outputs (Scantest only at present)
STROBE_LA 0.6*_C AC-Typ Typ #N/A #N/A #N/A 0.20*_ ### ### 0.6*_C 0.9*_C use with 2mA outputs (Scantest only at present)
only at present)
C
33 5.2344 14.6109 0.0000
34 5.2266 14.6500 0.0000
35 5.2266 14.6422 0.0000
36 5.2578 14.6109 0.0000
ha
37 5.2188 14.6422 0.0000
38 5.2344 14.6266 0.0000
39 5.3359 14.7125 0.0000
40 5.3203 14.7516 0.0000
n
41 5.1797 14.6031 0.0000
42 5.1953 14.6266 0.0000
43 5.5469 14.9234 0.0000
44 5.1953 14.5563 0.0000
ne
45 5.2734 14.6734 0.0000
46 5.4766 14.7281 0.0000
47 5.3047 14.6031 0.0000
48 5.2891 14.7203 0.0000
l
49 5.5313 14.8297 0.0000
50 5.3281 14.7438 0.0000 Path RT
51 5.3750 14.7516 0.0000
52 5.4688 14.8609 0.0000
53 5.3672 14.7125 0.0000
54 9.3531 0.0000 0.0000
55 5.7969 15.2203 0.0000
56
57
58
59
5.3672
5.4688
5.6406
5.4297
14.7438
14.7828
14.9938
14.8453
0.0000
0.0000
0.0000
0.0000
C
60
61
62
63
5.2891
5.8203
5.5000
5.7109
14.6422
15.2047
14.8844
15.1734
0.0000
0.0000
0.0000
0.0000
ha
64
65
67
68
4.0703
5.2070
4.2031
4.5000
13.3688
14.5836
13.5719
13.8453
0.0000
0.0000
0.0000
0.0000
n
70
71
76
96
3.9766
4.3828
3.7891
5.3984
13.3297
13.7594
13.0719
14.7672
0.0000
0.0000
0.0000
0.0000
ne
97
98
99
100
5.4219
5.2578
5.3984
5.6641
14.7750
14.7203
14.7672
15.0719
0.0000
0.0000
0.0000
0.0000
l
Edge RT
C
103 5.6172 14.9859 0.0000
104 5.2500 14.7047 0.0000
105 5.4219 14.7516 0.0000
106 5.6797 15.0250 0.0000
ha
107 5.3516 14.7672 0.0000
108 5.3047 14.7047 0.0000
109 5.6563 14.9938 0.0000
110 5.3437 14.7359 0.0000
n
111 5.4219 14.9000 0.0000
112 5.6719 15.0172 0.0000
ne
ha
113
114
5.3672
5.4609
14.7516
14.8609
0.0000
0.0000
n
ne
115 5.7734 15.2359 0.0000
116 5.3984 14.7828 0.0000
117 5.5547 14.9391 0.0000
118 5.3359 14.7594 0.0000
l
119 5.5547 14.9781 0.0000
120 5.5469 14.9703 0.0000
Window R
121 5.4063 14.8609 0.0000
122 5.5859 14.9859 0.0000
123 5.5391 14.9859 0.0000
124 5.4531 14.8375 0.0000
125 5.5938 14.9703 0.0000
126 5.5938 14.9469 0.0000
127 5.7031 15.1500 0.0000
128 3.5234 12.8844 0.0000
129 6.8906 16.2438 0.0000
130 5.8828 15.2750 0.0000
131 6.8750 16.2828 0.0000
132 6.7813 16.1422 0.0000
133 5.8281 15.1344 0.0000
134 5.8438 15.2281 0.0000
135 5.9063 15.3141 0.0000
136 5.6797 15.0406 0.0000
137 5.8750 15.2359 0.0000
138 5.7891 15.1578 0.0000
139 5.6719 15.0563 0.0000
140 5.6875 15.0406 0.0000
141 5.7344 15.0094 0.0000
142 5.6641 14.9391 0.0000
143 5.7109 15.0406 0.0000
144 5.6484 14.9781 0.0000
145 5.5859 14.9156 0.0000
146 5.6172 15.0094 0.0000
147 5.6016 15.0094 0.0000
148 5.4453 14.7828 0.0000
149 5.5781 14.9625 0.0000
150 5.5391 14.9234 0.0000
151 5.4766 14.8766 0.0000
152 5.3828 14.7516 0.0000
153 5.4219 14.8297 0.0000
154 5.4531 14.8453 0.0000
155 5.3672 14.7750 0.0000
156 5.3438 14.7047 0.0000
157 5.3594 14.7047 0.0000
158 5.2734 14.6344 0.0000
159 5.2891 14.6734 0.0000
160 3.6563 13.0406 0.0000
161 5.8594 15.2203 0.0000
162 5.8125 15.2906 0.0000
163 6.0625 15.4938 0.0000
164 5.8281 15.2281 0.0000
166 6.0938 15.4781 0.0000
167 5.8906 15.2438 0.0000
168 3.5313 12.9000 0.0000
169 6.0156 15.4078 0.0000
170 5.8047 15.2438 0.0000
171 3.8203 13.2750 0.0000
172 5.9766 15.3297 0.0000
173 5.8438 15.1969 0.0000
174 3.8828 13.1969 0.0000
175 5.9844 15.3609 0.0000
176 5.8125 15.2516 0.0000
177 6.1563 15.5484 0.0000
178 6.0547 15.4156 0.0000
179 5.9531 15.4078 0.0000
180 6.3359 15.7125 0.0000
181 6.1016 15.4547 0.0000
182 6.5547 15.9469 0.0000
183 6.3984 15.8844 0.0000
184 6.0625 15.4938 0.0000
185 6.1563 15.5563 0.0000
186 6.4141 15.8063 0.0000
187 6.0937 15.5641 0.0000
188 5.5156 14.8297 0.0000
189 6.3984 15.7516 0.0000
190 6.1641 15.5563 0.0000
191 5.6562 15.0484 0.0000
224 5.6797 15.0641 0.0000
225 5.6797 15.0328 0.0000
226 5.4766 14.8688 0.0000
227 5.5937 15.0094 0.0000
228 5.8516 15.2828 0.0000
229 5.5156 14.9078 0.0000
230 5.6328 14.9938 0.0000
231 5.8516 15.2672 0.0000
232 5.3828 14.7906 0.0000
233 5.6094 14.9078 0.0000
234 5.8984 15.3297 0.0000
235 5.5469 14.9781 0.0000
236 5.5391 14.8453 0.0000
237 5.9609 15.3531 0.0000
238 5.4766 14.8297 0.0000
239 5.6484 14.9781 0.0000
240 6.0391 15.4547 0.0000
241 5.5625 14.9313 0.0000
242 5.6641 15.0172 0.0000
243 6.0781 15.5250 0.0000
244 5.4531 14.8766 0.0000
245 5.6328 15.0016 0.0000
246 6.1953 15.5484 0.0000
247 5.5234 14.9313 0.0000
248 5.5781 14.9938 0.0000
249 6.2188 15.5563 0.0000
250 5.5469 14.9391 0.0000
251 6.3672 15.8297 0.0000
252 6.2734 15.6578 0.0000
253 5.6719 15.0406 0.0000
254 6.3984 15.8453 0.0000
255 6.4609 15.8688 0.0000
C
ha
n
ne
l
ge RTD
C
ha
n
ne
ha
n
ne
l
dow RTD
Teradyne IG-XL
K_dgsLC Utility
KNULL Utility
IO SD_CLK I/O
JTAG_GR JTAG_TCK I/O
MEM_CTRL MEM_CSn_0 I/O
SCP_GR SCP1_CLK I/O
SYS_RSET_EST SYS_RSTn I/O
MEM_GR MEM_A_0 I/O
ADC_REF ADC_REFN I/O USB_XIN
SMPS_GR SMPS_VIN I/O
SMPS_OUT SMPS_OUT_0 Output
SMPS_FB1 SMPS_FB Input
USB_VBUS1 USB_VBUS I/O
TFT_GR TFT_RED_0 I/O
ATA_GR ATA_DD_0 I/O
SYS_XTAL12 SYS_XTAL1 I/O
USB_GR USB_XOUT I/O
Leakage JTAG_TMS I/O
DIODE_VSS IO I/O
TDR_Exclude_Pins SMPS_OUT_0 Output
ADC_OUT SPDIF_OUT I/O AUD_SCLK
ADC_GROUP SPDIF_OUT I/O
ADC_OUT1 AUD_SCLK I/O
Xtal SYS_XTAL1 I/O
DIB ID:
TFT_RED_5 N/C
TFT_GREEN_0 N/C
TFT_GREEN_1 N/C
TFT_GREEN_2 N/C
TFT_GREEN_3 N/C
TFT_GREEN_4 N/C
TFT_GREEN_5 N/C
TFT_BLUE_0 N/C
TFT_BLUE_1 N/C
TFT_BLUE_2 N/C
TFT_BLUE_3 N/C
TFT_BLUE_4 N/C
TFT_BLUE_5 N/C
TFT_VDDEN_GD N/C
TFT_PANELCLK N/C
TFT_BLANK_LS N/C
TFT_VSYNC_NS N/C
TFT_HSYNC_NR N/C
TFT_VD12ACB N/C
TFT_PWRSAVE N/C
ATA_CSn_0 N/C
ATA_CSn_1 N/C
ATA_DD_0 N/C
ATA_DD_1 N/C
ATA_DD_2 N/C
ATA_DD_3 N/C
ATA_DD_4 N/C
ATA_DD_5 N/C
ATA_DD_6 N/C
ATA_DD_7 N/C
ATA_DD_8 N/C
ATA_DD_9 N/C
ATA_DD_10 N/C
ATA_DD_11 N/C
ATA_DD_12 N/C
ATA_DD_13 N/C
ATA_DD_14 N/C
ATA_DD_15 N/C
ATA_DA_0 N/C
ATA_DA_1 N/C
ATA_DA_2 N/C
ATA_DMARQ N/C
ATA_DMACKN N/C
ATA_DIORN N/C
ATA_DIOWN N/C
ATA_RDY N/C
ATA_INTRQ N/C
ATA_RESETN N/C
MEM_A_21 N/C
MEM_A_22 N/C
USB_XIN N/C
USB_XOUT N/C
USB_DM N/C
USB_DP N/C
USB_ID N/C
USB_RBIAS N/C
USB_VBUS N/C
USB_VBUS_DRIVE N/C
USB_VBUS_FAULT N/C
ADC_INP LMFsrc_high lmf30 LMFsrc_high
ADC_INN LMFsrc_low lmf30 LMFsrc_low
ADC_CM LMFcm_sense lmf30
ADC_REFN N/C ch34
ADC_REFP N/C ch37 need to close relay during analogue test
AUD_DAC_OUT_L LMFcap_high lmf30 LMFcap_high
AUD_DAC_OUT_R LMFcap_high lmf31 LMFcap_high
SYS_XTAL1 I/O ch188 this is for coninuity test, for analogue
SYS_XTAL2 I/O ch185 needs to clos erelays
LMF_SYS_XTAL1 LMFsrc_high lmf31 by closing relay 100
SMPS_VIN I/O ch33 for continuity purpose, for smps
Lev_Dummies N/C
FEATURE_0 N/C
FEATURE_1 N/C
DIB ID:
DIB ID:
KNULL N/C
CH_MEM_IO I/O ch76
FEATURE_0 N/C Dummy for Pattern
FEATURE_1 N/C Dummy for Pattern
Lev_Dummies N/C
DFF 1. DC Specs
Selector POR_HIGH
SMPS_FBSMPS_VSVOL/VOH
Continuity
DC-POR-LOWDC-Ana DC-Std
Symbol Value Name Val Typ Typ Typ Typ Typ Typ Typ Typ Comment
VT_PU #N/A DC-Min Min ### ### ### ### 0 ### ### ### VT set to 90% of IO voltage to model pull ups, for use on all ope
VT_PU 0 DC-Typ Typ ### ### ### ### 0 ### ### ### VT set to 90% of IO voltage to model pull ups, for use on all ope
VT_PU #N/A DC-Max Max ### ### ### ### 0 ### ### ### VT set to 90% of IO voltage to model pull ups, for use on all ope
VT_PU 0 Selector Typ ### ### ### ### 0 ### ### ### VT set to 90% of IO voltage to model pull ups, for use on all ope
VT_PU 0 Selector Typ ### ### ### ### 0 ### ### ### VT set to 90% of IO voltage to model pull ups, for use on all ope
VT_PU 0 Selector Typ ### ### ### ### 0 ### ### ### VT set to 90% of IO voltage to model pull ups, for use on all ope
CORE_VDD #N/A DC-Min Min ### ### ### ### 0 ### ### ### 1.2 volt core supply +/- 10%
CORE_VDD 0 DC-Typ Typ ### ### ### ### 0 ### ### ### 1.2 volt core supply +/- 10%
CORE_VDD #N/A DC-Max Max ### ### ### ### 0 ### ### ### 1.2 volt core supply +/- 10%
CORE_VDD 0 Selector Typ ### ### ### ### 0 ### ### ### 1.2 volt core supply +/- 10%
CORE_VDD 0 Selector Typ ### ### ### ### 0 ### ### ### 1.2 volt core supply +/- 10%
CORE_VDD 0 Selector Typ ### ### ### ### 0 ### ### ### 1.2 volt core supply +/- 10%
IO_VDD #N/A DC-Min Min ### ### ### ### 0 ### ### ### 3.3 volt I/O supply +/- ~10% (limit to max specified in library)
IO_VDD 0 DC-Typ Typ ### ### ### ### 0 ### ### ### 3.3 volt I/O supply +/- ~10% (limit to max specified in library)
IO_VDD #N/A DC-Max Max ### ### ### ### 0 ### ### ### 3.3 volt I/O supply +/- ~10% (limit to max specified in library)
IO_VDD 0 Selector Typ ### ### ### ### 0 ### ### ### 3.3 volt I/O supply +/- ~10% (limit to max specified in library)
IO_VDD 0 Selector Typ ### ### ### ### 0 ### ### ### 3.3 volt I/O supply +/- ~10% (limit to max specified in library)
IO_VDD 0 Selector Typ ### ### ### ### 0 ### ### ### 3.3 volt I/O supply +/- ~10% (limit to max specified in library)
MEM_IO_VD #N/A DC-Min Min ### ### ### ### 0 ### ### ### Memory supply same as I/O supply
MEM_IO_VD 0 DC-Typ Typ ### ### ### ### 0 ### ### ### Memory supply same as I/O supply
MEM_IO_VD #N/A DC-Max Max ### ### ### ### 0 ### ### ### Memory supply same as I/O supply
MEM_IO_VD 0 Selector Typ ### ### ### ### 0 ### ### ### Memory supply same as I/O supply
MEM_IO_VD 0 Selector Typ ### ### ### ### 0 ### ### ### Memory supply same as I/O supply
MEM_IO_VD 0 Selector Typ ### ### ### ### 0 ### ### ### Memory supply same as I/O supply
ADC_DVDD #N/A DC-Min Min ### ### ### ### 0 ### ### ### ADC digital supply same as core
ADC_DVDD 0 DC-Typ Typ ### ### ### ### 0 ### ### ### connected to MEMIO_VDD hardware modification 16 nov06
ADC_DVDD #N/A DC-Max Max ### ### ### ### 0 ### ### ### ADC digital supply same as core
ADC_DVDD 0 Selector Typ ### ### ### ### 0 ### ### ### ADC digital supply same as core
ADC_DVDD 0 Selector Typ ### ### ### ### 0 ### ### ### ADC digital supply same as core
ADC_DVDD 0 Selector Typ ### ### ### ### 0 ### ### ### ADC digital supply same as core
PLL1_DVDD #N/A DC-Min Min ### ### ### ### 0 ### ### ### PLL digital supply same as core
PLL1_DVDD 0 DC-Typ Typ ### ### ### ### 0 ### ### ### PLL digital supply same as core
PLL1_DVDD #N/A DC-Max Max ### ### ### ### 0 ### ### ### PLL digital supply same as core
PLL1_DVDD 0 Selector Typ ### ### ### ### 0 ### ### ### PLL digital supply same as core
PLL1_DVDD 0 Selector Typ ### ### ### ### 0 ### ### ### PLL digital supply same as core
PLL1_DVDD 0 Selector Typ ### ### ### ### 0 ### ### ### PLL digital supply same as core
USB_DIG_VDD DC-Min Min ### ### ### ### 0 ### ### ### USB digital supply same as core
USB_DIG_VD 0 DC-Typ Typ ### ### ### ### 0 ### ### ### USB digital supply same as core
USB_DIG_VDD DC-Max Max ### ### ### ### 0 ### ### ### USB digital supply same as core
USB_DIG_VD 0 Selector Typ ### ### ### ### 0 ### ### ### USB digital supply same as core
USB_DIG_VD 0 Selector Typ ### ### ### ### 0 ### ### ### USB digital supply same as core
USB_DIG_VD 0 Selector Typ ### ### ### ### 0 ### ### ### USB digital supply same as core
USB_PLL_VDD DC-Min Min ### ### ### ### 0 ### ### ### USB PLL supply same as core
USB_PLL_VD 0 DC-Typ Typ ### ### ### ### 0 ### ### ### USB PLL supply same as core
USB_PLL_VDD DC-Max Max ### ### ### ### 0 ### ### ### USB PLL supply same as core
USB_PLL_VD 0 Selector Typ ### ### ### ### 0 ### ### ### USB PLL supply same as core
USB_PLL_VD 0 Selector Typ ### ### ### ### 0 ### ### ### USB PLL supply same as core
USB_PLL_VD 0 Selector Typ ### ### ### ### 0 ### ### ### USB PLL supply same as core
ADC_AVDD DC-Min Min ### ### ### ### 0 ### ### ### ADC analogue supply same as core
ADC_AVDD 0 DC-Typ Typ ### ### ### ### 0 ### ### ### ADC analogue supply same as core
ADC_AVDD DC-Max Max ### ### ### ### 0 ### ### ### ADC analogue supply same as core
ADC_AVDD 0 Selector Typ ### ### ### ### 0 ### ### ### ADC analogue supply same as core
ADC_AVDD 0 Selector Typ ### ### ### ### 0 ### ### ### ADC analogue supply same as core
ADC_AVDD 0 Selector Typ ### ### ### ### 0 ### ### ### ADC analogue supply same as core
PLL1_AVDD DC-Min Min ### ### ### ### 0 ### ### ### PLL analogue supply same as core
PLL1_AVDD 0 DC-Typ Typ ### ### ### ### 0 ### ### ### PLL analogue supply same as core
PLL1_AVDD DC-Max Max ### ### ### ### 0 ### ### ### PLL analogue supply same as core
PLL1_AVDD 0 Selector Typ ### ### ### ### 0 ### ### ### PLL analogue supply same as core
PLL1_AVDD 0 Selector Typ ### ### ### ### 0 ### ### ### PLL analogue supply same as core
PLL1_AVDD 0 Selector Typ ### ### ### ### 0 ### ### ### PLL analogue supply same as core
AUD_DAC_AVDD DC-Min Min ### ### ### ### 0 ### ### ### AUDIO Filter supply same as I/O
AUD_DAC_A 0 DC-Typ Typ ### ### ### ### 0 ### ### ### AUDIO Filter supply same as I/O
AUD_DAC_AVDD DC-Max Max ### ### ### ### 0 ### ### ### AUDIO Filter supply same as I/O
AUD_DAC_A 0 Selector Typ ### ### ### ### 0 ### ### ### AUDIO Filter supply same as I/O
AUD_DAC_A 0 Selector Typ ### ### ### ### 0 ### ### ### AUDIO Filter supply same as I/O
AUD_DAC_A 0 Selector Typ ### ### ### ### 0 ### ### ### AUDIO Filter supply same as I/O
DCXO_VDD DC-Min Min ### ### ### ### 0 ### ### ### DCXO supply same as I/O
DCXO_VDD 0 DC-Typ Typ ### ### ### ### 0 ### ### ### DCXO supply same as I/O
DCXO_VDD DC-Max Max ### ### ### ### 0 ### ### ### DCXO supply same as I/O
DCXO_VDD 0 Selector Typ ### ### ### ### 0 ### ### ### DCXO supply same as I/O
DCXO_VDD 0 Selector Typ ### ### ### ### 0 ### ### ### DCXO supply same as I/O
DCXO_VDD 0 Selector Typ ### ### ### ### 0 ### ### ### DCXO supply same as I/O
USB_ANA_VDD DC-Min Min ### ### ### ### 0 ### ### ### USB analogue supply same as I/O
USB_ANA_V 0 DC-Typ Typ ### ### ### ### 0 ### ### ### USB analogue supply same as I/O
USB_ANA_VDD DC-Max Max ### ### ### ### 0 ### ### ### USB analogue supply same as I/O
USB_ANA_V 0 Selector Typ ### ### ### ### 0 ### ### ### USB analogue supply same as I/O
USB_ANA_V 0 Selector Typ ### ### ### ### 0 ### ### ### USB analogue supply same as I/O
USB_ANA_V 0 Selector Typ ### ### ### ### 0 ### ### ### USB analogue supply same as I/O
VIL #N/A DC-Min Min ### ### ### ### 0 ### ### ### VIL set to 10% of I/O supply
VIL 0 DC-Typ Typ ### ### ### ### 0 ### ### ### VIL set to 10% of I/O supply
VIL #N/A DC-Max Max ### ### ### ### 0 ### ### ### VIL set to 10% of I/O supply
VIL 0 Selector Typ ### ### ### ### 0 ### ### ### VIL set to 10% of I/O supply
VIL 0 Selector Typ ### ### ### ### 0 ### ### ### VIL set to 10% of I/O supply
VIL 0 Selector Typ ### ### ### ### 0 ### ### ### VIL set to 10% of I/O supply
VIH #N/A DC-Min Min ### ### ### ### 0 ### ### ### VIH set to 90% of I/O supply
VIH 0 DC-Typ Typ ### ### ### ### 0 ### ### ### VIH set to 90% of I/O supply
VIH #N/A DC-Max Max ### ### ### ### 0 ### ### ### VIH set to 90% of I/O supply
VIH 0 Selector Typ ### ### ### ### 0 ### ### ### VIH set to 90% of I/O supply
VIH 0 Selector Typ ### ### ### ### 0 ### ### ### VIH set to 90% of I/O supply
VIH 0 Selector Typ ### ### ### ### 0 ### ### ### VIH set to 90% of I/O supply
VOL #N/A DC-Min Min ### ### ### ### ### ### ### ### VOL set to 35% of I/O supply
VOL ### DC-Typ Typ ### ### ### ### ### ### ### ### VOL set to 35% of I/O supply
VOL #N/A DC-Max Max ### ### ### ### ### ### ### ### VOL set to 35% of I/O supply
VOL ### Selector Typ ### ### ### ### ### ### ### ### VOL set to 35% of I/O supply
VOL ### Selector Typ ### ### ### ### ### ### ### ### VOL set to 35% of I/O supply
VOL ### Selector Typ ### ### ### ### ### ### ### ### VOL set to 35% of I/O supply
VOH #N/A DC-Min Min ### ### ### ### ### ### ### ### VOH set to 65% of I/O supply
VOH ### DC-Typ Typ ### ### ### ### ### ### ### ### VOH set to 65% of I/O supply
VOH #N/A DC-Max Max ### ### ### ### ### ### ### ### VOH set to 65% of I/O supply
VOH ### Selector Typ ### ### ### ### ### ### ### ### VOH set to 65% of I/O supply
VOH ### Selector Typ ### ### ### ### ### ### ### ### VOH set to 65% of I/O supply
VOH ### Selector Typ ### ### ### ### ### ### ### ### VOH set to 65% of I/O supply
IOL #N/A DC-Min Min ### 0 0 ### ### ### ### ### 100uA (typical) current source (0 min and 500uA max)
IOL ### DC-Typ Typ ### 0 0 ### ### ### ### ### 100uA (typical) current source (0 min and 500uA max)
IOL #N/A DC-Max Max ### 0 0 ### ### ### ### ### 100uA (typical) current source (0 min and 500uA max)
IOL ### Selector Typ ### 0 0 ### ### ### ### ### 100uA (typical) current source (0 min and 500uA max)
IOL ### Selector Typ ### 0 0 ### ### ### ### ### 100uA (typical) current source (0 min and 500uA max)
IOL ### Selector Typ ### 0 0 ### ### ### ### ### 100uA (typical) current source (0 min and 500uA max)
IOH #N/A DC-Min Min ### 0 0 ### ### ### ### ### current sink (magnitude equal to current source)
IOH ### DC-Typ Typ ### 0 0 ### ### ### ### ### current sink (magnitude equal to current source)
IOH #N/A DC-Max Max ### 0 0 ### ### ### ### ### current sink (magnitude equwas -1ma
IOH ### Selector Typ ### 0 0 ### ### ### ### ### current sink (magnitude equal to current source)
IOH ### Selector Typ ### 0 0 ### ### ### ### ### current sink (magnitude equal to current source)
IOH ### Selector Typ ### 0 0 ### ### ### ### ### current sink (magnitude equal to current source)
VT #N/A DC-Min Min ### ### ### ### ### ### ### ### Standard VT set to half I/O supply voltage
VT ### DC-Typ Typ ### ### ### ### ### ### ### ### Standard VT set to half I/O supply voltage
VT #N/A DC-Max Max ### ### ### ### ### ### ### ### Standard VT set to half I/O supply voltage
VT ### Selector Typ ### ### ### ### ### ### ### ### Standard VT set to half I/O supply voltage
VT ### Selector Typ ### ### ### ### ### ### ### ### Standard VT set to half I/O supply voltage
VT ### Selector Typ ### ### ### ### ### ### ### ### Standard VT set to half I/O supply voltage
VT_cntrl #N/A DC-Min Min ### ### 0 #N/A #N/A ### ### ### General purpose vt use for test like smps
VT_cntrl #N/A DC-Typ Typ ### ### 0 #N/A #N/A ### ### ### General purpose vt use for test like smps
VT_cntrl #N/A DC-Max Max ### ### 0 #N/A #N/A ### ### ### General purpose vt use for test like smps
VT_cntrl #N/A Selector Typ ### ### 0 #N/A #N/A ### ### ### General purpose vt use for test like smps
VT_cntrl #N/A Selector Typ ### ### 0 #N/A #N/A ### ### ### General purpose vt use for test like smps
VT_cntrl #N/A Selector Typ ### ### 0 #N/A #N/A ### ### ### General purpose vt use for test like smps
FB_HIGH #N/A DC-Min Min ### ### ### ### 0 ### ### ###
FB_HIGH 0 DC-Typ Typ ### ### ### ### 0 ### ### ###
FB_HIGH #N/A DC-Max Max ### ### ### ### 0 ### ### ###
FB_HIGH 0 Selector Typ ### ### ### ### 0 ### ### ###
FB_HIGH 0 Selector Typ ### ### ### ### 0 ### ### ###
FB_HIGH 0 Selector Typ ### ### ### ### 0 ### ### ###
FB_LOW #N/A DC-Min Min ### ### ### ### 0 ### ### ###
FB_LOW 0 DC-Typ Typ ### ### ### ### 0 ### ### ###
FB_LOW #N/A DC-Max Max ### ### ### ### 0 ### ### ###
FB_LOW 0 Selector Typ ### ### ### ### 0 ### ### ###
FB_LOW 0 Selector Typ ### ### ### ### 0 ### ### ###
FB_LOW 0 Selector Typ ### ### ### ### 0 ### ### ###
SENSE_HIGH #N/A DC-Min Min ### ### ### ### 0 ### ### ###
SENSE_HIGH 0 DC-Typ Typ ### ### ### ### 0 ### ### ###
SENSE_HIGH #N/A DC-Max Max ### ### ### ### 0 ### ### ###
SENSE_HIGH 0 Selector Typ ### ### ### ### 0 ### ### ###
SENSE_HIGH 0 Selector Typ ### ### ### ### 0 ### ### ###
SENSE_HIGH 0 Selector Typ ### ### ### ### 0 ### ### ###
SENSE_LOW #N/A DC-Min Min ### 0 ### ### 0 ### ### ###
SENSE_LOW 0 DC-Typ Typ ### 0 ### ### 0 ### ### ###
SENSE_LOW #N/A DC-Max Max ### 0 ### ### 0 ### ### ###
SENSE_LOW 0 Selector Typ ### 0 ### ### 0 ### ### ###
SENSE_LOW 0 Selector Typ ### 0 ### ### 0 ### ### ###
SENSE_LOW 0 Selector Typ ### 0 ### ### 0 ### ### ###
IOL_aud #N/A DC-Min Min ### #N/A #N/A #N/A #N/A ### ### ### The audio filter can sink a maximum of 20 uA from an external s
IOL_aud #N/A DC-Typ Typ ### #N/A #N/A #N/A #N/A ### ### ### The audio filter can sink a maximum of 20 uA from an external s
IOL_aud #N/A DC-Max Max ### #N/A #N/A #N/A #N/A ### ### ### The audio filter can sink a maximum of 20 uA from an external s
IOL_aud #N/A Selector Typ ### #N/A #N/A #N/A #N/A ### ### ### The audio filter can sink a maximum of 20 uA from an external s
IOL_aud #N/A Selector Typ ### #N/A #N/A #N/A #N/A ### ### ### The audio filter can sink a maximum of 20 uA from an external s
IOL_aud #N/A Selector Typ ### #N/A #N/A #N/A #N/A ### ### ### The audio filter can sink a maximum of 20 uA from an external s
IOH_aud #N/A DC-Min Min ### ### 0 #N/A #N/A ### ### ### The audio filter can source a maximum of 200 uA to an external
IOH_aud #N/A DC-Typ Typ ### ### 0 #N/A #N/A ### ### ### The audio filter can source a maximum of 200 uA to an external
IOH_aud #N/A DC-Max Max ### ### 0 #N/A #N/A ### ### ### The audio filter can source a maximum of 200 uA to an external
IOH_aud #N/A Selector Typ ### ### 0 #N/A #N/A ### ### ### The audio filter can source a maximum of 200 uA to an external
IOH_aud #N/A Selector Typ ### #REF! 0 #N/A #N/A ### ### ### The audio filter can source a maximum of 200 uA to an external
IOH_aud #N/A Selector Typ ### 0 0 #N/A #N/A ### ### ### The audio filter can source a maximum of 200 uA to an external
Tdelay_Defau ### DC-Min Min ### ### ### ### ### ### ### ### Default delay from core supply to test start, 30 mS (can we redu
Tdelay_Defau ### DC-Typ Typ ### ### ### ### ### ### ### ### Default delay from core supply to test start, 30 mS (can we redu
Tdelay_Defau ### DC-Max Max ### ### ### ### ### ### ### ### Default delay from core supply to test start, 30 mS (can we redu
Tdelay_Defau ### Selector Typ ### ### ### ### ### ### ### ### Default delay from core supply to test start, 30 mS (can we redu
Tdelay_Defau ### Selector Typ ### ### ### ### ### ### ### ### Default delay from core supply to test start, 30 mS (can we redu
Tdelay_Defau ### Selector Typ ### ### ### ### ### ### ### ### Default delay from core supply to test start, 30 mS (can we redu
Tdelay_Defau ### Typ ### ### ### ### ### ### ### ###
Tdelay_Defau ### Typ ### ### ### ### ### ### ### ###
modification 16 nov06