Professional Documents
Culture Documents
WB-10A Nokhar
WB-10A Nokhar
WB-10A Nokhar
The DURESCA® busbar are fully insulated compact busbar system, type RIP (resin impregnated paper).
The insulation lays directly on the conductor and consists of wrapped paper dried under vacuum and
impregnated with epoxy resin. Conductive grading layers are embedded during the wrapping in the
insulation for the best field control. The earth layer of 50 mm2 which can take up an internal short circuit
current of 8 kA/ 1 sec. is entirely embedded in the insulation and provides a complete electrical screen.
This guarantees the highest operational and human safety.
The DURESCA® busbar system is calculated on an ambient temperature of 40°C. The temperature rise
of the conductor at rated current can be up to 50 K.
On the whole length of the bar, the surface of the insulation is covered by a corrugated protection tube in
polyamid, aluminium or stainless steel. This protection tube provides an effective barrier against moisture
ingress.
Note:
When installing and commissioning the DURESCA® busbar system, it is essential to ensure that the
busbar system including brackets is earthed in accordance with the specifications in our dimension
drawing and connected to a single earth potential.
Different earth potentials can lead to damage to persons and plant components.
Due to a high current circulating in main conductor, a magnetic field occurs around the system. The use
of magnetic materials like steel in the narrow of busbars should be submitted to agreement between
customer and MGC.
Quotation No.: OA 2024 1068301 Page: 3 of 7
1. Calculation, engineering of the busbar ways according to the customer building drawings.
2. Layout drawings of the busbar system
3. Detailed drawings of the connection to the switchgears, transformers etc.
4. Detailed drawings of the support material
5. Partlists
6. Technical datasheets
7. Manuals in English
All documents are available in pdf format.
Standarddocumentation:
1 Set in paper
1 set PDF via Email
Multiple documentation is possible and will be charged.
Included in the scope of delivery are the standard fastening material and earth clamps. The included
standard fastening material is calculated for a busbar - wall or ceiling distance of max. 1.50m. Larger
distances or special fastening supports etc. will be charges upon needed items.
Included in the scope of delivery is the complete earthing material (copper wire cross section 50mm2).
Remark:
While mounting or taking the DURESCA® busbars into operation it is a must to connect the complete
busbar system as well as the support material according to our drawings and recommendations on one
single earth potential.
Different earth potentials may cause risks for human beings as well as for the complete system.
Quotation No.: OA 2024 1068301 Page: 4 of 7
Pos. Part No. / Drawing no. Quantity Unit Price Total Price
Description EUR EUR
10 DE52/4000/AL 1.0 set 159'000.00
214'600.00 159'000.00
214'600.00
DURESCA Busbar
Tertiary connection
Note: The Travel Tickets, Hotel, daily expenses... for the client's inspector(s) are excluded.
FAT Test are carried out on pre-selected items up to max. 10% of the to be delivered parts.
Pos. Part No. / Drawing no. Quantity Unit Price Total Price
Description EUR EUR
- The assembly date must be confirmed by the customer at the latest 6 weeks before the start
of assembly.
- In the event of postponements < 4 weeks, we reserve the right to claim costs for
cancellations, rebookings and for the loss of personnel.
Routine tests:
Routine test according to IEC 60137, 2017-06 performed on each individual sleeve (Um > 12kV) and
busbar.
Clause 9.2 Measurement of dielectric dissipation factor (tan delta) and capacitance
Clause 9.4 Dry power-frequency voltage withstand test
Clause 9.5 Measurement of partial discharge quantity
Highest partial discharge values at 1.50 Um/V3: <= 10 pC
Commercial Terms
Terms of delivery:
FCA, free carrier 4303 Kaiseraugst, according to Incoterms 2020
Method of shipment:
by seafreight
Quotation No.: OA 2024 1068301 Page: 7 of 7
Terms of payment:
100
50%%atthrough
Order conf. and irrevoc. L/C
The
50%contract comes into force when the accepted (by client and MGC) letter of credit is available.
before Delivery
All dates guaranteed under the condition that the payments are on time.
The manufacturing will only be started after the receipt of the payment.
When the payments take place at a later time the date of delivery has to be mutually agreed upon.
Delivery time:
30 weeks (ex works) after approval of drawings.
The confirmed delivery date can only be guaranteed if the drawings are approved by the customer on
time.
Warranty:
24 months after taking into operation, but latest 30 months after information ready for shipment.
The warranty only refers to contractual deliveries by MGC, any further liability is excluded. The liability of
the Company to the Purchaser shall not in any case exceed the cost of the defective part. Seller shall not
be liable for damage due to act of ordinary negligence nor for consequential damages or damages for
economic losses, or claims against Buyer resulting from third-party.
Validity of quotation:
1 month
We thank you for this inquiry and submit you the required quotation.
We would be please to execute that project for you.
Do not hesitate to contact us for any further information’s.
Please always mention the delivery and billing address in your order.
This quotation is based upon the General Conditions of Sale published on www.mgc.ch. All other
conditions do not apply unless otherwise written agreed by MGC Moser - Glaser AG.
Our offer is based on daily updated raw material prices. Due to the current situation on the raw
materials market, we reserve the right to adjust our offer prices to the current prices. Should the
raw material prices change extraordinarily during the project execution phase, we reserve the
right to make a price adjustment.
Kind regards