Professional Documents
Culture Documents
BOM F1-Pro v1.1
BOM F1-Pro v1.1
BOM F1-Pro v1.1
Flat Ribbon Cable 200mm 20P 20-pin flat ribbon cable assembly 1 The upper part has to be removed from the connector (see the manual) https://www.aliexpress.com/item/1005003434553567.html
Ribbon Wire 20-pin ribbon wire Alternative 1 Alternative for 20p 200m ribbon cable assembly. Mounting the connector with vise: https://www.aliexpress.com/item/1005004314500329.html
Ribbon conncetor 20-pin ribbon IDC connector Alternative 2 https://www.youtube.com/watch?v=EFyFhcmeS2I https://www.aliexpress.com/item/1005004277608424.html
Button cap for 12x12 tact For tacttile 12x12 buttons 10 (The buttons are not illuminated, the LEDs are on the PCB, which are lighting through the caps.) https://www.aliexpress.com/item/32890066634.html https://www.ebay.com/itm/322328189669
Button cap 5.3x10mm for 6x6 tact Grip button caps 2 https://www.aliexpress.com/item/33028874105.html https://www.aliexpress.com/item/4000907527877.html
Button 6x6x8mm tact Tactile button for the grips 2 https://www.aliexpress.com/item/32912263133.html https://www.ebay.com/itm/173641057225
Light guide D4x10mm Light guide pipe for RGB LEDs 25 https://www.newark.com/multicomp-pro/mp007524/light-pipe-circular-9-5mm-clr/dp/29AK2063 https://www.aliexpress.com/item/1005004928587063.html
Leo Bodnar coiled USB cable Coiled USB cable 1 http://www.leobodnar.com/shop/index.php?main_page=product_info&products_id=331
F1-Pro Main PCB Main (custom) PCB of the wheel 1 Can be order from JLCPCB, see the manual. https://jlcpcb.com/ https://www.pcbway.com/
F1-Pro Rotary PCB Rotary (custom) PCB with the front 12pos switches 1 Can be order from JLCPCB, see the manual. https://jlcpcb.com/ https://www.pcbway.com/
Alps Alpine RKJXT1F42001 7-way (funky) switch Optional 2 In case you want to have funky switches https://hu.mouser.com/ProductDetail/688-RKJXT1F42001
Omron B3F-4055 12x12 Tactile push button 260g 10 Or any similar 12x12 tactile button with square actuator for button cap https://hu.mouser.com/ProductDetail/Omron-Electronics/B3F-4055?qs=B3tblJ0Nlt%2FdFVcSHGFuxQ%3D%3D https://www.aliexpress.com/item/1005004123116469.html
For PCBs
Shrouded IDC Socket header 20-pin 20 pin connector for ribbon cable 2 https://www.aliexpress.com/item/1005001516029146.html https://www.ebay.com/itm/182241733695
LL4148 diode Diodes for Rotary PCB Optional 80 In case you want to practice SMD soldering on Rotary PCB (see the manual for further details) https://www.aliexpress.com/item/32844954546.html https://hu.mouser.com/ProductDetail/onsemi-Fairchild/FDLL4148?qs=GXJjH%252BIVz3Nb7%252BJnJig0Zw%3D%3D
12-pos 1-pole rotary switch 12 positon rotary switches for Front PCB 5 Buttons, encoders and connectors on the PCB are the part of the PCB BOM! https://www.aliexpress.com/item/32907959214.html https://www.ebay.com/itm/203958029961
M5x25mm Hex Standoff 8 Recommended to buy in local screw shop (shouldn't cost more than 0.5USD/pcs) https://www.aliexpress.com/item/1005001415028259.html https://www.tme.eu/gb/details/tff-m5x25_dr148/metal-spacers/dremec/148x25/
M4xD6.0xL8.0mm Brass Threaded Insert 6 https://www.aliexpress.com/item/1005002072800580.html
Nuts
M3 Nut 38 https://www.aliexpress.com/item/1005003111431468.html
M3 Nylon Locknut Black 5 https://www.aliexpress.com/item/1005003125712734.html
M3xD4.2xL6.0mm Brass Threaded Insert 16 https://www.aliexpress.com/item/1005002526998853.html
Screws/nuts/other mech. parts
Spring WD1.0mmxOD15mmxL50mm For clutch 1 You can try different force springs if you want https://www.aliexpress.com/item/1005002654175295.html
Ø8x4mm Magnet N35 For clutch 1 N35 grade magnet only for DRV5053RA! Different HALL sensor might need different strength. https://www.aliexpress.com/item/1005003838880990.html https://www.ebay.com/itm/334094159534
Ø12x5mm Magnet N50 (N35) For rear paddles 8 Strength of the shifter can be adjusted with the magnet strength. Use N35 or N50/N35 combination for a bit https://www.ebay.com/itm/293657586635 https://www.aliexpress.com/item/1005001614110377.html
wearker paddles. I have used N50 for the shifter, N35 for the adjust paddles.
FrontPlate 6.0mm 3K matte twill weave carbon fiber 1 CNC machined Carbon fiber plates (alternatively aluminum)
BackPlate 4.0mm 3K matte twill weave carbon fiber 1 You can use different pattern or gloss carbon also.
ShifterPaddleL 3.0mm 3K matte twill weave carbon fiber 1 Pre-cut set available here: https://www.thefrenchsimracer.com/en/categorie-produit/pokornyi-engineering-
Plates
FrontPlateInsert Technology used on PE proto wheel: HP MJF from JLCPCB 1 Choose the type according to your likings (with or without funky)
MainEnclosure Technology used on PE proto wheel: HP MJF from JLCPCB 1 Alternatively use the cut version for smaller printer form the OPTIONAL folder
GripFront-R Technology used on PE proto wheel: HP MJF Black Classic 1 Soft touch finish from Weerg is nice technology, gives nice rubbery touch to the parts, but quite expensive. You
GripRear-R with soft touch finish from Weerg 1 can print with cheaper technology and cover the grips
GripFront-L 1
GripRear-L 1
TopRotaryCover-L Technology used on PE proto wheel: HP MJF from JLCPCB 1
TopRotaryCover-R Technology used on PE proto wheel: HP MJF from JLCPCB 1
ThumbRotaryCover-L Technology used on PE proto wheel: HP MJF from JLCPCB 1
ThumbRotaryCover-R Technology used on PE proto wheel: HP MJF from JLCPCB 1
3D printed parts
Decals DecalFrontRotary Printed on matt white polyester adhesive 1 Pre-cut sticker set available at TheFrenchSimracer:
DecalButtons Printed on matt transparent polyester adhesive 1 https://www.thefrenchsimracer.com/en/categorie-produit/pokornyi-engineering-diy-parts/