Ladder Inspection Checklist

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 1

OHSE MANAGEMENT SYSTEM PROCESSES Doc. No.

AFC/1706/HSE/27
(ISO 45001: 2018 & ISO 14001: 2015) Job code-1706
CONSTRUCTION OF MUMBAI – AHMEDABAD HIGH SPEED Rev. No:00
RAIL Package No: MAHSR – C 2
Date: 26.05.2023
Page:

LADDER INSPECTION CHECKLIST


Inspected by: Location:

Ladder identification no. Date:

Sr.
Description of check point Observation Yes/No NA Remarks
No.
1. Are ladders the right means of access for the job?

2. Are the ladders in good condition?


Are they secured to prevent them slipping sideways
3.
or outwards?
Do ladder rise to a sufficient height above there
4.
landing place? If not are there hand holds available?
Are the ladder positioned so that used don't have
5.
overstep or climb over obstacles to work
Does the ladder rest against a solid surface and not
6.
on fragile or insecure materials?
Whether the position at an angle of 75 degree or at
7.
the ratio of4:1?
Whether it is adequately anchored at the bottom and
8.
top of ladder?
Is the space between the rungs are even and
9.
uniform?
Whether any metal ladders are used by the
10.
subcontractors?
Is the ladder extended at least 1 meter from place of
11.
landing of ladder?

Signature of Site Engineer/Supervisor Name & signature of SHE Representative

You might also like