Professional Documents
Culture Documents
A 2 Zworldsrl 1622795969
A 2 Zworldsrl 1622795969
4. Install the device away from strong signal sources such as microwave
IEC 60669-2-1:2002/AMD1:2008/
AMD2:2015, IEC 60669-1:1998/
Inhouse local operation oven that may cause signal interruption resulted in abnormal operation
AMD1:1999/AMD2:2006,
MS-108ZR:ZigBee+RF433 of the device.
EN 60669-2-1:2004+A1: 2009+ A2:2010,
5. Obstruction by concrete wall or metallic materials may reduce the
effective operation range of the device and should be avoided. EN 60669-1:2018
APP
6. Do NOT attempt to disassemble, repair or modify the device. RoHS Standard (RoHS)
App Router Voice control Reset Curtain Switch
2011/65/EU, (EU) 2015/683
Rocker Curtain switch
1 2 3 4
Output
L
Output
reset
button
Add Device
Reset Curtain Switch
Add Device
Power on the light and confirm
(Wi-Fi) the indicator blinks rapidly
Region
Press the reset button for more than 7 seconds until Open the App, select “+” on top right,choose
Log in or register your account with your mobile Make sure your smart phone and ZigBee switch
the beep sounds continuously rapidly as Di-Di-Di... “Switch (Zigbee)” to add device.And select the right
number or e-mail address. Type in the verification module are under the same WiFi network at
for entering into ZigBee pairing mode. Gateway to confirm the connection.
code sent to your mobile or mail box, then set your 2.4 GHz connection.Confirm when the beep
login password. Click "Create Family" to enter into Note: Make sure you have successfully connected sounds continuously rapidly (twice a second).
the App. one Zigbee gateway hub.
9 10 11 12
RF Link Method
(only for MS-108ZR)
Connecting
Make sure your router,mobile,and
1 Press the reset button for 5 times and wait
device are as close as possible
All Device More for 2 seconds until the red indicator flashes
Basic information about the device fast to pair with the open button.
Device added successfully
Device Name 2 Press the reset button for 6 times and wait
2% Device Location
Check Network
for 2 seconds until the red indicator flashes
Switch Zigbee fast to pair with the close button.
Supported Third-party
Control Others
3 Press the reset button for 7 times and wait
Device found
Share Device
Register device to the smart cloud
initializing device
for 2 seconds until the red indicator flashes
Create Group
Amazon
Alexa
Google
Assistant Device information
fast to pair with the stop button.
Feedback
Others
Reset Method
1 Press the reset button for more than 7
seconds to start to reset of Wi-Fi method.
Connect to Amazon Alexa or Google Assistant 2 Press the reset button for 10 times for
When pairing is done, the Zigbee switch will be for voice control, or share the devices with your clearing mode of RF.
shown on the App. families or friends.
The connecting will take about 10-120 seconds to
complete depending on your network condition.
13 14 15 16