Professional Documents
Culture Documents
Piping Expansion Joint Loop Calculation
Piping Expansion Joint Loop Calculation
1. CALCULATION OBJECTIVE
The objective of this calculation is to determine the correct sizing expansion loop
of piping due to thermal expansion by operational temperature change.
2. GENERAL INFORMATION
Equipment name = Hot Oil Pipe
Tag number = C-201
P&ID refference = SSG-RA-DF1-G5-2024
3. PROCESS DATA
3.1 Fluid Data
Fluid name Hot Oil
Fluid flow rate F = 20 m3/h
0
Fluid temperature T = 85 C
Fluid pressure P =3 barg
4. CALCULATION
Calculation are started by determine linear expansion of the pipe. Following formula are
used :
Δ𝐿 = α𝐿∆𝑇
After piping growth in length due to thermal expansion, the length of piping loop are
calculated by following formula :
3𝐸𝑂𝐷Δ𝐿
𝑊 + 2𝐻 =
𝑆
5. RESULT
With above equations, following results are obtained :
1,2
2,3
Anchor Anchor
* *
2,3 2,3
10