Professional Documents
Culture Documents
Technology Grade 9 March 2017 Test 1
Technology Grade 9 March 2017 Test 1
TECHNOLOGY
TERM 1 TEST
MARCH 2017
GRADE 9
MARKS : 80
DURATION : 2HRS
NAME OF LEARNER:__________________________________
CLASS : ____________________
INSTRUCTIONS:
1. Answer all questions.
2. Write neatly and legibly.
3. All answers must be written in the space provided in the question paper.
4. Follow instructions promptly.
5. All drawings should be in pencil, neat and fully labled.
6. Coloured pencils may be used only for shading where such is required.
QUESTION 1
1.1. In Technology, drawing can be produced using enlarging scale, reducing scale or actual scale.
A. 1:2
B. 1:1
C. 1:0
D. 2:1
1.2. The drawing instrument that can accurately measure angles is a________.
A. Compass
B. Protractor
C. Ruler
D. Rubber
1.3. A member of a structure that support the structure on the side of stress is_________.
A. Column
B. Guy
C. Strut
D. Beam
(1 X 5 = 5)
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 3 MARCH 2017 COMMON TEST
QUESTION 2
2.2. Strength of the material is the degree to which the force can be applied to the material
2.4. Corrosion is a chemical term that refers to the gradual destruction of a material.
_________________________.
2.5. An entrance that can accommodate both disabled and abled people is the one with steps
(1 X 5 = 5)
QUESTION 3
3.1 Match the properties of materials in column A with their properties in column C. Just write the
letter of the correct property in column B
6. Malleability
(1 X 6 = 6)
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 4 MARCH 2017 COMMON TEST
3.2 The arrows on FIGURE 1 below show the direction of forces exerted by the tank and the
direction of the movement of the truck respectively. Use this picture to answer the question
that follows.
Force
Movement
k
Tan
3.2.1 What is the difference between the force exerted on the truck by the tank and the
force exerted by the moving truck on the ground? (2)
_______________________________________________________________________________
3.2.2 What is the name of the force that is exerted by the tank on the truck? (1)
3.2.3 The tank is said to be exerting an uneven load on the truck. Explain why? (2)
_______________________________________________________________________________
_______________________________________________________________________________
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 5 MARCH 2017 COMMON TEST
3.3 Use the pictures in FIGURE 2 and FIGURE 3 below to answer the questions that follow.
FIGURE 2 FIGURE 3
3.3.1 Which Figure above experiences uneven load? Give reason for your answer (3)
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
3.3.2 Do you think the force exerted by the child on the swing is dynamic or static? Give
reason for your answer. (3)
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 6 MARCH 2017 COMMON TEST
3.4 Study FIGURE 4 below and answer the questions that follow.
3.4.1 Which type of force is demonstrated by the two men in FIGURE 4? (1)
___________________________________________________________________
3.4.2 What would happen if these two men could keep applying the force until they
overcome the strength of the rope? (2)
___________________________________________________________________
___________________________________________________________________
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 7 MARCH 2017 COMMON TEST
3.5 Which forces are represented by FIGURE 5 and FIGURE 6 below? (2)
FIGURE 5 FIGURE 6
[ 22 ]
QUESTION 4
Study the following picture and answer the questions that follow.
___________________________________________________________________________
4.2 Suggest one ways in which this problem can be solved (1)
____________________________________________________________________
___________________________________________________________________
4.3 What is the indigenous/oldest ways of solving a problem like this? (1)
____________________________________________________________________
____________________________________________________________________
4.4 You are now requested to design something permanent, stationary and modern that can
span over the river and allow people and cars to cross over. Write a design brief for your
solution. (2)
____________________________________________________________________
____________________________________________________________________
4.5 Write two reasons why crossing rivers like in Figure 7 is dangerous (4)
a) ____________________________________________________________________
____________________________________________________________________
b) ____________________________________________________________________
____________________________________________________________________
a) ____________________________________________________________________
____________________________________________________________________
b) ____________________________________________________________________
____________________________________________________________________
(18)
Question 5
5.1 Give the names and descriptions of the following line types as used in graphic communications.
The answers should be written in table as in the provided example. (12)
QUESTION 6
6.1 Redraw the staircase below in the provided empty isometric grid using the scale 1 : 1. (8)
3 Steps 3
Correctness 2
Total 8
RAMOTSHERE MOILOA AO TECHNOLOGY GRADE 9 11 MARCH 2017 COMMON TEST
6.2 Draw not to scale, the first angle projection of the given isometric drawing in 6.1 (10)
Top View
Top View
Assessment Criteria Mark Mark
Top view 3
Front view 3
Side view 3
Neatness 1
Total 10
[18]
TOTAL = 80