Professional Documents
Culture Documents
How To Draft A Mandarin Collar Pattern - The Creative Curator
How To Draft A Mandarin Collar Pattern - The Creative Curator
This week’s post is how to draft a Mandarin collar pattern (also known as a
Chinese collar). I have received many emails from my readers asking me
how to make a Chinese collar, and so a tutorial on drafting a mandarin
collar pattern seemed like a great starting point.
So, I thought this week I would start with the mandarin collar, as it is a
simple collar to draft, being a standing collar – this tutorial will also work
for anyone wanting to learn how to make a standing collar!
Some of the links in this article are affiliate links. This means that I may
receive a fee at no extra cost to you if you purchase a recommended product.
https://www.thecreativecurator.com/draft-mandarin-collar-pattern/ 1/12
5/23/24, 10:33 AM How To Draft A Mandarin Collar Pattern - The Creative Curator
https://www.thecreativecurator.com/draft-mandarin-collar-pattern/ 2/12
5/23/24, 10:33 AM How To Draft A Mandarin Collar Pattern - The Creative Curator
Unlike a standard shirt collar, a Mandarin / stand collar does not have a
fold in the fabric, and wraps neatly around the neck.
https://www.thecreativecurator.com/draft-mandarin-collar-pattern/ 3/12
5/23/24, 10:33 AM How To Draft A Mandarin Collar Pattern - The Creative Curator
to have your basic tool set to hand. You can check this post for my
recommended pattern making tools!
1. Paper
3. Eraser
4. Ruler or pattern master (if you don’t have a pattern master, you will need a set square or
protractor for accurate angle creation)
5. Paper scissors
4. Button stand width if the collar will be lined up with the outside edge
of the button stand
Mandarin collars can range in depth and shape, though typically they are a
non-convertible stand collar. This means that when sewn onto the garment
neckline, they do not ‘convert’. They just stand up.
Think of a shirt collar. It has a stand which the collar is then attached too.
The mandarin collar is much like the stand part of the shirt collar.
https://www.thecreativecurator.com/draft-mandarin-collar-pattern/ 4/12
5/23/24, 10:33 AM How To Draft A Mandarin Collar Pattern - The Creative Curator
to use our tape measure on it’s edge for a more accurate measurement.
1. We first measure from the centre back of the neckline to the shoulder
point. In my example, the measurement is 9cm
2. Next we measure from the shoulder point to the centre front. Note
down the measurement
3. Finally, you need to consider how deep you want your collar to be.
Have a look at other collars on clothes in your closet. Which depth do
you like? I wanted quite a narrow mandarin collar on my Jude so I
made it 3cm but in the example video below it is 3.5cm, and I kept it
consistent with my cuff depth too.
You could go crazy extreme but if this is your first time drafting a collar, I
would aim for something between 2.5cm / 1inch to 3.5cm / 1 ⅜ inch.
https://www.thecreativecurator.com/draft-mandarin-collar-pattern/ 5/12
5/23/24, 10:33 AM How To Draft A Mandarin Collar Pattern - The Creative Curator
The photo below is a great example of what would have been a rather
more extreme mandarin collar pattern!
2. Square up from here using a 90º angle. Label this squared up line on
the left hand side CB – this is shorthand for Centre Back.
3. Measure along the bottom line and place a mark equal to the
measurement you took from centre back to shoulder point. Here I use
is 9cm.
4. Square a line upwards from here and make a note that this is your
shoulder line. We will notch this later.
5. Measure another point further along the bottom line that is the same
measurement as the shoulder point to the centre front. Mine is
10.5cm.
6. You will also need to add on the button stand width as well. Don’t
forget that your button stand width is determined by the size of your
button! My button stand is 3cm wide. This number needs to be halved
https://www.thecreativecurator.com/draft-mandarin-collar-pattern/ 6/12
5/23/24, 10:33 AM How To Draft A Mandarin Collar Pattern - The Creative Curator
if we are intending for the collar to meet in the middle of the button
stand, or can be kept whole if we want the collar to overlap.
7. For the purpose of this pattern, I now need to make a mark 12cm on
from the shoulder notch. (In the video below I have halved the button
stand amount so that the collar meets and doesn’t overlap. On the silk
Jude shirt I made recently I actually decided to extend the collar so
that there was an overlap and room for a button too.)
9. Make a mark 1.5cm up from this bottom line. This is where we draw in
a slight gentle curved line from our shoulder point to this marked
point.
10. Moving back to the centre back section, mark the chosen width of
your collar on the centre back line. I am going for 3.5cm here in this
example.
11. Square across from this point, so that the line you draw is parallel to
the bottom line, and make sure that it is consistent. I also have a
3.5cm distance from my shoulder notch on the bottom line to the top
line.
12. This collar depth amount needs to also follow through along the
curved line we drew in step ?
13. Now connect the dots to form a slightly curved line at the top. This
will be your collar edge, while the bottom line is the neckline edge.
14. Square up from the bottom curved line until it meets the top line.
15. Draw in a nice curve that suits your needs. You can get crazy here and
go for a scalloped curved section, you could extent it somewhat into a
winged collar, or just keep it simple for your first attempt and have a
gentle curve like in the video below.
16. Finally, you mark in where your centre front is. Mine is hard of my
button stand measurement, so I pop a nice squared line 1.5cm in from
https://www.thecreativecurator.com/draft-mandarin-collar-pattern/ 7/12
5/23/24, 10:33 AM How To Draft A Mandarin Collar Pattern - The Creative Curator
the edge.
I typically go for 5mm on the collar edge so that I can get a less bulky
finish, and 1cm on the neckline edge, which I clip into or grade, if needed.
To save cutting, I often cheat and cut the collar on the fold, but
traditionally you would reflect the pattern from the centre back so that
you have one long collar pattern piece.
Size
https://www.thecreativecurator.com/draft-mandarin-collar-pattern/ 8/12
5/23/24, 10:33 AM How To Draft A Mandarin Collar Pattern - The Creative Curator
Now, if this all sounds a tad confusing, check out my YouTube video – I
show you how to draft a mandarin collar in just over 11 minutes! 🙂
By Eve Tokens
Published: March 1, 2017
Collar Pattern Making, Pattern Making
https://www.thecreativecurator.com/draft-mandarin-collar-pattern/ 9/12