Professional Documents
Culture Documents
463 Novapress-Basic
463 Novapress-Basic
Material profile
The balanced raw material combination,
consisting of high-quality aramide fibres,
special fillers and nitrile-butadiene-rubber
(NBR), gives novapress® BASIC the
following special properties:
• Good media resistance
• Good stress relaxation
• High pressure resistance
• Excellent value for money
Identification colour: orange
Application areas
novapress® BASIC is the ideal choice for
use under average temperature and
pressure conditions.
• Sanitary engineering
(gas and water supply)
• Pipeline construction
• Plant engineering
• Machine manufacturing
GASKETS
TECHNICAL TEXTILES
EXPANSION JOINTS
INSULATION
NEW MATERIALS
All previous versions of this prospectus cease to apply. Subject to technical amendment.
Technical information about novapress® BASIC
Recommendations for use Material data
according to the pressure and temperature
General data
Binders NBR
Water/steam Approvals DVGW, SVGW, HTB, KTW, VP-401, WRC
90 Colour both sides orange
80 Anti-stick coating serially one side anti-stick coating
70 Sheet size and thickness tolerance according DIN 28 091-1
Pressure (bar)
60
50
40 Physical properties Standard Unity Value*
30 Gasket thickness 2.0 mm
20 Saturated steam
curve Density DIN 28 090-2 [g/cm3] 1.75
10
0 Tensile strength DIN 52 910
0 20 40 60 80 100 120 140 160 180 200 longitudinal [N/mm2] 14
Temperature (°C)
transverse [N/mm2] 6
Residual stress σ dE/16 DIN 52 913
175 °C [N/mm2] 30
Other Media* 300 °C [N/mm2] 17
90
Compressibility ASTM F 36 J [%] 8
80
70 Recovery ASTM F 36 J [%] 60
Pressure (bar)
40 3000 x 1500
30
• Thicknesses in mm: 0.3/0.5/0.75/1.0/1.5/2.0/3.0/4.0
• Further dimensions and thicknesses are available on request
20
10
0
0 10 20 30 40 50 40° 60° 80° 100° 120° 140° 160° 180° 200° 220° 240° 260°
N/mm2 Temperature (°C)
at room temperature at 50 N/mm2 pressure
FL/12/11.07/03/FL
GASKETS
TECHNICAL TEXTILES