Professional Documents
Culture Documents
User Manual of BS-S104
User Manual of BS-S104
1 Synopsis
Guiding lights
Outer covering
Connector
Red DC12-36V
Black GND
Green Relay(NO)
Sensitiveness
Yellow Relay(COM)
potentiometer
The function set up
LED
--After the sensor starts, Flat surface air wire
guiding lights is able to glimmer several seconds.
--When the sensor carries out a probing on motion,
guiding lights is bright.
2 1 0 1 2 M
MIN
1
MAX
2
MIN MAX 0
Air wire perpendicularity angle: 30
Assemble an altitude: 2.2M
2 1 0 1 2 M
15°
30° 1
45°
60° 2
D
The sensor should be The sensor being not The detecting area The detecting area Do not direct contact
Tightly to prevent from able to put in the covering inner can not place inner can not have the sensor’s air wire.
fixation vibrating. or directly being put in having the object the fluorescence
the rear of other material. move or swaying. source existence.
5 Trouble removal
Abnormal Possibility Cause Troubleshooting
The door can not open, orchid color guiding The sensor has not received a power source. Inspection wiring and power source.
lights does not light.
The door opens or closes 1).Sensor induction arrives at motion. Enhance air wire assembling an angle,
superseded automatically. or bring down sensitiveness.
2).The door produces vibration when being Ensure that the sensor is fixed by rightness.
closed down. Enhance air wire assembling an angle,
or bring down sensitiveness.
The door can not open, orchid color guiding The door charge switch is bad, Examining and ensuring the door charge switch
lights does not light. or location is wrong. is to be in be coming untied or Automation state.
6 Technology function
Realization technology :Microwave and microprocessor
Launch frequency :24.125GHZ
Launch power :<20 dBm EIRP
Launch frequency density :<5mW/cm
2
2/2