Professional Documents
Culture Documents
Assignment 1 Nov 2023
Assignment 1 Nov 2023
Assignment 1 Nov 2023
INSTRUCTIONS TO CANDIDATES
NAME :
STUDENT ID. :
GROUP :
LECTURER’S NAME :
Q1 /10
CO3/PO3/DK5/DP2/C5
CO3/PO3/DK5/DP2/C5
TOTAL /10
QUESTION 1
Two plates are attached together as shown in Figure 1. A 10 kN force is being applied at the end
of the plate and it is applied eccentrically to a group of rivets in Region A. Design the suitable
number and arrangement of rivets in the Region A following design criteria as below:
Design assumption:
(i) the number of rivets must be more than 4 (number of rivet > 4). The selection of size
and materials of the rivets can be referred from Table 2.1 and Table B1 available in the
list of formula.
(ii) the design safety factor, n must be in the range of 2.4 - 2.6 by using formula,
𝝉𝝉𝒚𝒚𝒚𝒚𝒚𝒚𝒚𝒚𝒚𝒚
𝒏𝒏 =
𝝉𝝉𝒎𝒎𝒎𝒎𝒎𝒎
Please summarise your answers in Table 1 and attach the table with your solutions as the
conclusion.
(10 Marks)
CO3/PO3/DK5/DP2/C5
Figure 1
Table 1: Please fill in the required information table below. The table should be included at the
end of the calculation as a conclusion.
B. Materials Selection of
Selection of Selection of Selection of Selection of
materials and size
materials and size materials and size materials and size materials and size
are poorly and 0.1
are not adequately are limitedly are clearly are excellently
a) Approriate material and size selection. unclearly
identified. identified. identified. identified.
identified.