Professional Documents
Culture Documents
Water Temperature Regulators - Install (SENR1126-36)
Water Temperature Regulators - Install (SENR1126-36)
Water Temperature Regulators - Install (SENR1126-36)
Installation Procedure
PSP
202 -000A
Table 1
© 2 R112 08:00
C FT-3578 Drive As 1
D 1S-0258 Plastic Hammer As 1
024 6
Cat
erp
illa
r In
c.
Illustration 1 g06122705
https://sis2.cat.com/#/print-preview/service/127008ac-702a-4f69-b048-27299c438648 1/3
3/25/24, 4:02 PM SIS 2.0
Illustration 2 g06122785
Illustration 3 g06122704
2. Install seal (9) onto Tooling (B).
3. Use Tooling (B) and install seal (9) into housing assembly (7). Repeat for remaining seals (9).
Illustration 4 g00890807
5. Use a suitable lifting device and Tooling (A) to position housing assembly (7). Install bolts (6).
The weight of housing assembly (7) is approximately 30 kg (65 lb).
https://sis2.cat.com/#/print-preview/service/127008ac-702a-4f69-b048-27299c438648 2/3
3/25/24, 4:02 PM SIS 2.0
Illustration 5 g00890799
6. Connect tube assemblies (5).
Illustration 6 g00890783
7. Position tube assembly (3). Install bolts (1), (2), and (4).
8. Fill the engine cooling system with coolant. Refer to Operation and Maintenance Manual,
"Capacities - Refill".
PSP-000A4FC7
2024/03/25
08:02:13+08:00
i01739272
© 2024 Caterpillar Inc.
https://sis2.cat.com/#/print-preview/service/127008ac-702a-4f69-b048-27299c438648 3/3