Professional Documents
Culture Documents
What You Will Need To Bypass The Electric Meter
What You Will Need To Bypass The Electric Meter
To hack the electric system, you need to have the following tools with you;
AC adaptor
Electrical tape
Plastic wraps
Plastic cups
A knife
A speaker wire
2 magnets
RELATED Solar Panel Testing (3 Methods)
Direct linking taps power directly from the main power line. You must link
your cable to the line way ahead of the electric meter. Your power
consumption will not be tracked. To link directly, you can either use
switches or link without the switches.
Most of the electric meters are positioned in a straight direction on the wall.
This is meant to allow the disk to rotate evenly. The spinning disc shows the
amount of energy that is being used at the moment. Changing the direction
of the electric meter to an opposite direction disrupts the movement of the
disk until it stops rotating.
Once the disk has stopped spinning, the amount of power used will not be
recorded.
RELATED Solar Panel Testing (3 Methods)
The electric meter has two wires; black and red. The red wire has the power
load while the black wire indicates the neutral on the panel board. The
spinning electric meter disk requires both wires to be connected to the panel
board so that it can move freely.
The metering screw is clung to the rotating disk thereby reducing its
rotation speed. If the rotating disk is slow, the electricity consumption will
be reduced giving you an advantage. The final reading of the meter will
indicate less consumption hence cutting down your electricity bill.
The above methods are for informational purposes. They are easy to apply
and anyone can use them at home. Dealing with electric appliances and
electricity is dangerous and you need to take a lot of caution. It is also
important to note that bypassing your electric meter is illegal and you can be
prosecuted for it.
Caution: This article is purely for your knowledge. We do not support the
bypassing of the electric meter.
How he