Professional Documents
Culture Documents
CM20211018 E26ca Ea088
CM20211018 E26ca Ea088
CM20211018 E26ca Ea088
oil filters
The difference is in the detail
More protection and better performance
for your Perkins® 904 Series engines
Perkins® Ecoplus fuel filters have been protecting Perkins engines for more than 20 years,
and now proven technology is available in oil filters for your Perkins® 904 Series engines.
Using a low quality oil filter can have severe Easier and cleaner to change
consequences. Engine oil contaminated with particulates Perkins® Ecoplus oil filters use a replaceable filter
can cause piston, cylinder and bearing wear, especially element inside a reusable top cover and they are
during start-up and sludge can block galleries and filters mounted upright on the engine for easy access. Simply
which can reduce oil supply to critical components. The unscrew the top cover and lift out the cap and element.
consequences can include reduced power, increased The oil automatically drains back into the block when the
emissions, overheating and even turbocharger failure. cover is opened making the whole operation quick and
clean. Simply replace the element and screw the top
cover back on and the job is finished.
Acrylic beading
Acrylic beading and spiral roving to
prevent bunching and reduce media
Multi-layer media flex which maximises surface area
to provide consistent filtration and
Advanced multi-layer
increased contaminant retention
cellulose/synthetic
media to increase
dirt-holding capacity
Centre tube
Moulded urethane
A non-metallic centre tube that is stronger
Moulded urethane end caps that
and cleaner than metal while eliminating
seal against the housing to help
the potential for harmful swarf and
eliminate potential leaks and
resisting collapse during pressure spikes
prevent the filter element from
being installed incorrectly
Find out more about the full Ecoplus range at: www.perkins.com/ecoplus
Copyright © 2021 Perkins Engines Company Limited, all rights reserved. No part of this document may be
reproduced in any form or by any means, without prior written permission of Perkins Engines Company Limited.
The information in this document is substantially correct at the time of printing and may be altered subsequently.
Publication No. PN3100EN/09/21 www.perkins.com