Professional Documents
Culture Documents
Plotting Map
Plotting Map
Plotting Map
MINING DEPARTEMENT
LTP Plotting a Map
STANDARD JOB PROCEDURE
NOMOR : 07.LTP.09
SECTION/AREA : LTP
TYPE : Routine
Number of Revision : 0
Pages :1–8
1. Introduction
The main reason of making this procedure is to make guidance for Vulcan user to have the right
procedure to plot a map as needed.
2. Responsible
All Vulcan users who will use plot tools.
4. Reference
This Vulcan Software is referring to Vulcan Help menu that available in Vulcan 4.5 and Vulcan 6.0
version menu.
5. Related Procedure
This working procedure is not related with other procedures.
9. Procedure
9.1. Preparation
- Make sure that in you working directory, you already have all the files below:
1. *.dgd
2. *.dg1
3. *.dgx
Long Term Planning Section – Mine Technology
2. Plot all design that have already loaded; go to file > plot > plot all wizard > fill Plot Filename
cell (ex. SJP) > next
Fill sheet size cell (choose sheet size as needed, ex. A3) > click sheet orientation (landscape or
portrait) > next
Long Term Planning Section – Mine Technology
Click Plot Grid and Fill vertical & horizontal line spacing cell as needed > next
Click manual scale adjustment and fill plot scale cell as needed > adjust extents
> drag the boundary (yellow boundary) to area that will be plotted > right click > finish
Long Term Planning Section – Mine Technology
3. After the file ready to plot, choose the printer & the page (as we defined before)
Long Term Planning Section – Mine Technology
Long Term Planning Section – Mine Technology
5. The map will be viewed without legend or description. The legend can be displayed if you
click use drafting sheet in the first step of plotting; go to file > plot > plot all wizard > click use
drafting sheet > choose drafting sheet as needed > next.
The next step is same as above (point 2-4).