Professional Documents
Culture Documents
Qüestionari Tots No Resuelto
Qüestionari Tots No Resuelto
QÜESTIONARI INVERSORS
1. Un inversor de corrent:
3. En un inversor monofàsic:
1
[ELECTRÒNICA DE POTÈCIA] Pau Isach Noguera
10. En una estructura d’inversor monofàsic mitjançant un PWM de 5 polsos per període:
2
[ELECTRÒNICA DE POTÈCIA] Pau Isach Noguera
QÜÈSTIONARI DC-DC
1. Quina/es d’aquestes aplicacions NO corresponen a un circuit DC-DC?
a) Control de bateries.
b) Interfícies digitals.
c) Fonts de potència.
4. Quina/es afirmacions són falsos respecte al control per amplada i freqüència de polsos?
a) PWM manté la freqüència constant, mentre que PFM manté el corrent contant de càrrega.
b) PWM amb la freqüència constant, mentre que PFM té la freqüència proporcional al corrent.
3
[ELECTRÒNICA DE POTÈCIA] Pau Isach Noguera
b) En els aïllants podem obtenir diferents sortides en tensió amb diferents punts de control.
b) Consta de tres blocs principals: amplificació de 2 etapes, filtre passa-banda a fc/2 i tensió de
referència.
d) No calen elements externs per fer-lo estable, ja que l’estabilitat és molt bona.
e) S’utilitza un transistor PMOS perquè utilitza 2V i és més adequat que els 0,5V del NMOS.
4
[ELECTRÒNICA DE POTÈCIA] Pau Isach Noguera
QÜESTIONARI AC-DC
1. Indica quin tipus de rectificadors existeixen:
a) Trifàsics.
b) Controlats. d) No controlats.
c) Monofàsics. e) Rectificadors.
a) Quan tenim una càrrega R + inductància i volem que el díode arribi ràpid a la tensió Vm.
b) Quan tenim una càrrega R + capacitat i volem que el díode arribi ràpid a la tensió Vm.
c) Quan tenim una càrrega R + inductància i volem que el díode afegeix lentament Vm.
d) Quan tenim una càrrega R + capacitat i volem que el díode afegeix lentament Vm.
5
[ELECTRÒNICA DE POTÈCIA] Pau Isach Noguera
e) Existeixen tres tipus: mig pont, pont complet i transformador amb derivació central.
d) En el trifàsic tenim 2 díodes a la sortida de cada fase i un desfase de 60º entre elles.
c) Consta d’un díode de lliure circulació juntament amb quatre tiristors: 2 per branca.
d) Consta d’un díode de lliure circulació juntament amb una càrrega R + inductor.
6
[ELECTRÒNICA DE POTÈCIA] Pau Isach Noguera
QÜESTIONARI RECTIFICADORS
1. Un rectificador de corrent amb càrrega R1.
7
[ELECTRÒNICA DE POTÈCIA] Pau Isach Noguera
d) No es bloquejaran mai.
b) És igual al quocient entre el valor eficaç de la tensió d’entrada del primer harmònic i la tensió
d’eficiència total.
c) És igual al quocient entre el valor eficaç de la corrent d’entrada del primer harmònic i el valor
eficaç de corrent d’entrada total, multiplicat per el cosinus de l’angle.
8
[ELECTRÒNICA DE POTÈCIA] Pau Isach Noguera
QÜESTIONARI LABVIEW
LESSON 3
1. If an input to a function is marked with a red dot (known as a coercion dot), what dos de
dot indicate?
a) While Loop.
b) For Loop.
a) Control. b) Constant.
4. Which mechanical action causes a Boolean control in the FALSE state to change to TRUE
when you click it and stay TRUE until you release it and LabVIEW has read the value?
9
[ELECTRÒNICA DE POTÈCIA] Pau Isach Noguera
LESSON 4
a) Required.
b) Recommended.
c) Optional.
a) True.
b) False. You do not need to create a custom icon to use a VI as a subVI, but it is highly
recommended to increase the readability of your code.
LESSON 5
a) True.
b) False. You cannot drag an array data type into an array shell. However, you can create two
dimensional arrays.
2. You have two input arrays wired to a For Loop. Auto-indexing is enabled on both tunnels.
One array has 10 elements, the second array has five elements. A value of 7 is wired to the
Count terminal, as shown in Figure 5-23. What is the value of the iterations indicator after
running this VI?
- LabVIEW does not exceed the array size, This helps to protect against programming error.
LabVIEW mathematical functions work the same way – if you wire a 10 elements array to the x
input of the Add function, and a 5 element array to the y input of the Add function, the output
is a 5 element array. Although the for loop runs 5 times, the iterations are zero based, therefore
the value of the iterations indicators is 4.
- El LabVIEW no excedeix a la mida de les matrius, això ajuda a protegir-lo contra l’error de
programació. Les funcions matemàtiques de LabVIEW funcionen de la mateixa manera – si es
cableja una matriu de 10 elements a l’entrada x de la funció Add, i una de 5 elements a
l’entrada de la funció Add, la sortida és una matriu de 5 elements. Encara que el bucle s’executi
5 vegades, les iteracions són zero, tant per els valors dels indicadors d’iteracions és de 4.
3. Which of the following custom control settings defines the data type of all instances of a
control but allows for different colors and font style?
a) Control.
10
[ELECTRÒNICA DE POTÈCIA] Pau Isach Noguera
b) Type Definition.
d) Cluster control.
4. You have input data representing a circle: X Position, Y Position, and Radius. In the future,
you might need to modify tour data to include the color of the circle. What data structure
should you use to represent the circle in your application?
a) Three separate controls for the two positions and the radius.
LESSON 6
1. After opening a file, which output does the Open/Create/Replace File function return?
a) File path.
b) File name.
c) Refnum out.
d) Task out.
a) Automate processes.
b) Save time.
11
[ELECTRÒNICA DE POTÈCIA] Pau Isach Noguera
a) True. b) False.
LESSON 7
1. When using a Sequence structure, you can stop the execution in the middle of a sequence.
a) True.
b) False.
2. Which of the following are benefits of using a state machine instead of a sequential
structure?
C) You can set conditions to determine when an item in the sequence should execute.
LESSON 8
a) True.
b) False. You should use variables only when necessary. Use wires to transfer data whenever
possible.
2. When controlling resources, which combination of writers and reduces the chance of race
conditions.
Aida pau
12