Professional Documents
Culture Documents
LV4000IKR01 - (EN) - General Overview
LV4000IKR01 - (EN) - General Overview
General Overview
User Manual
LV4000IKR01_[EN]_
No part of this publication may be
reproduced by whatever means without
the prior written permission of Ingeteam
Power Technology.
Table of contents
1. Overview ............................................................................................................... 4
LV4000IKR01_[EN]_
General Overview
1. Overview
1.1 Contents
This chapter indicates for whom this information is intended. It contains a flow chart
with the steps for verifying shipment, installation and commissioning of the system.
The reader of this manual must possess basic knowledge of electricity, electrical
components and electronics as well as being familiar with the symbols used in
electrical diagrams.
All personnel who come into contact with the equipment must be qualified and must
strictly comply with the safety standards for handling medium voltage equipment in
order to safeguard both their own physical integrity and that of the equipment.
This manual must be read before starting to work with the equipment.
The units used throughout the manual are based on IS (International System of
Measurements) unless other measurement units are specifically indicated.
The plaque located on a visible part of the equipment should not only state the main
features of the equipment, such as power, voltage, outgoing current, etc., but should
also show the equipment reference number, serial number and manufacturer.
When consulting the supplier with regard to any issue, please indicate information
items 1 to 4.
4
General Overview
1 Manufacturing year
2 Identifying serial number
3 Manufacturing version
4 Code of the Frequency Converter
The Frequency Converter Module described in this manual forms part of a larger
system and its operation is related to other devices and systems. Primarily, the User
Manual deals only with the converter itself. However, all information that the final
client considers to be relevant could eventually be included in the "Additional
Documents" section.
5
General Overview
Abbreviation Meaning
CF Compact Flash
CT Circuit
FS Full Scale
FO Fibre Optic
FWD Freewheeling
HF High Frequency
MCB External Main Input Switch. It can be controlled by the frequency converter.
PE Protective Earth
PG Protective Ground
RF Radio Frequency
VC Vectorial Control
Tbl. 1.1 Abbreviations and symbols
6
General Overview
7
www.ingeteam.com