Professional Documents
Culture Documents
Grande Oceanic Hotel, Golf Resort & Spa (GO) RFQs 04-29-2024
Grande Oceanic Hotel, Golf Resort & Spa (GO) RFQs 04-29-2024
Purchaser Comments
Vendor Comments
Notes
1 Year Warranty
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Vendor Comments
Notes
Order Approval, Quality Standards, Substitutions
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Notes
5 Year Warranty, Order Approval
Specifications
Manufacturer Manufacturer Co.
Page 2 of 3
Notes
5 Year Warranty, PO Terms/Conditions
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Subtotal 1,192,980.00
Sales Tax (8.25%) 0.00
Total (USD) 1,192,980.00
Notes
1 Year Warranty
Applies To: C.B.01
All products on this purchase order must be warranted for one year against defects in materials and workmanship.
Page 3 of 3
5 Year Warranty
Applies To: C.B.03, C.B.04
All products on this purchase order must be warranted for five years against defects in materials and workmanship.
Order Approval
Applies To: C.B.02, C.B.03
All POs are to be sent to the company project manager for review and approval.
PO Terms/Conditions
Applies To: C.B.04
This purchase order is subject to the Terms and Conditions in the attached document.
Quality Standards
Applies To: C.B.02
All products are free from defects and deficiencies. We set our quality standards to ensure that we deliver superior products and
services.
Substitutions
Applies To: C.B.02
All substitutions of materials and/or product must be submitted for written approval prior to manufacturing and purchasing. If
substitution is executed without written approval, no responsibility or liability for the new selection will be assumed.
Page 1 of 4
Notes
1 Year Warranty
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Notes
Order Approval, Quality Standards, Substitutions
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Notes
5 Year Warranty, Order Approval
Specifications
Manufacturer Manufacturer Co.
Notes
5 Year Warranty, PO Terms/Conditions
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Notes
1 Year Warranty
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Notes
Order Approval, Quality Standards, Substitutions
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Notes
5 Year Warranty, Order Approval
Specifications
Manufacturer Manufacturer Co.
Page 3 of 4
Notes
5 Year Warranty, PO Terms/Conditions
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Notes
1 Year Warranty
Applies To: C.B.01, C.B.01
All products on this purchase order must be warranted for one year against defects in materials and workmanship.
5 Year Warranty
Applies To: C.B.03, C.B.04, C.B.03, C.B.04
All products on this purchase order must be warranted for five years against defects in materials and workmanship.
Page 4 of 4
Order Approval
Applies To: C.B.02, C.B.03, C.B.02, C.B.03
All POs are to be sent to the company project manager for review and approval.
PO Terms/Conditions
Applies To: C.B.04, C.B.04
This purchase order is subject to the Terms and Conditions in the attached document.
Quality Standards
Applies To: C.B.02, C.B.02
All products are free from defects and deficiencies. We set our quality standards to ensure that we deliver superior products and
services.
Substitutions
Applies To: C.B.02, C.B.02
All substitutions of materials and/or product must be submitted for written approval prior to manufacturing and purchasing. If
substitution is executed without written approval, no responsibility or liability for the new selection will be assumed.
Page 1 of 3
Notes
1 Year Warranty
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Notes
Order Approval, Quality Standards, Substitutions
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Notes
5 Year Warranty, Order Approval
Specifications
Manufacturer Manufacturer Co.
Notes
5 Year Warranty, PO Terms/Conditions
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Subtotal 1,143,400.00
Sales Tax (8.25%) 0.00
Total (USD) 1,143,400.00
Notes
1 Year Warranty
Applies To: C.B.01
All products on this purchase order must be warranted for one year against defects in materials and workmanship.
5 Year Warranty
Applies To: C.B.03, C.B.04
All products on this purchase order must be warranted for five years against defects in materials and workmanship.
Order Approval
Applies To: C.B.02, C.B.03
All POs are to be sent to the company project manager for review and approval.
PO Terms/Conditions
Page 3 of 3
Quality Standards
Applies To: C.B.02
All products are free from defects and deficiencies. We set our quality standards to ensure that we deliver superior products and
services.
Substitutions
Applies To: C.B.02
All substitutions of materials and/or product must be submitted for written approval prior to manufacturing and purchasing. If
substitution is executed without written approval, no responsibility or liability for the new selection will be assumed.
Page 1 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Page 2 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Maker, Inc.
Mfg. Part # ST-100
Additional Specifications
Top Material: Manufactured Wood
Top Material Details: MDF and veneers
Base Material: Solid & Manufactured Wood
Base Material Details: Poplar and MDF
Base Wood Construction Details: Poplar
Drawers: Yes
Number of Drawers: 3
Drawer Glide Material: Wood
Shelves Included: Yes
Number of Shelves: 1
Top Color: Dark Brown
Base Color: Dark Brown
Country of Origin: China
Submittal Items
PDF Image
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 3
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Page 2 of 3
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Maker, Inc.
Mfg. Part # ST-100
Additional Specifications
Top Material: Manufactured Wood
Top Material Details: MDF and veneers
Base Material: Solid & Manufactured Wood
Base Material Details: Poplar and MDF
Base Wood Construction Details: Poplar
Drawers: Yes
Number of Drawers: 3
Drawer Glide Material: Wood
Shelves Included: Yes
Number of Shelves: 1
Top Color: Dark Brown
Base Color: Dark Brown
Country of Origin: China
Submittal Items
PDF Image
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Fairmont Designs Hospitality
Page 3 of 3
Additional Specifications
a
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Page 2 of 2
Specifications
Manufacturer Maker, Inc.
Mfg. Part # ST-100
Additional Specifications
Top Material: Manufactured Wood
Top Material Details: MDF and veneers
Base Material: Solid & Manufactured Wood
Base Material Details: Poplar and MDF
Base Wood Construction Details: Poplar
Drawers: Yes
Number of Drawers: 3
Drawer Glide Material: Wood
Shelves Included: Yes
Number of Shelves: 1
Top Color: Dark Brown
Base Color: Dark Brown
Country of Origin: China
Submittal Items
PDF Image
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Subtotal 139,700.00
Sales Tax (8.25%) 0.00
Total (USD) 139,700.00
Page 1 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Page 2 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Subtotal 846,890.00
Sales Tax (8.25%) 0.00
Total (USD) 846,890.00
Page 1 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Page 2 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Subtotal 904,950.00
Sales Tax (8.25%) 0.00
Total (USD) 904,950.00
Page 1 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Page 2 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Subtotal 208,000.00
Sales Tax (8.25%) 0.00
Total (USD) 208,000.00
Page 1 of 3
Specifications
Manufacturer Maker, Inc.
Mfg. Part # BWS-100
Additional Specifications
Specifications:
Product Type: Swing Arm
Dry, Damp or Wet Location Listed: Dry
Shade Included: No
Fixture Material: Stainless Steel
Number of Lights: 1
Voltage: 120 Volts
Dimmable: Yes
Maximum Wattage (per Bulb): 100 Watts
Bulb Base: E26/Medium (Standard)
Bulb Included: No
Bulb Type: Incandescent; LED; CFL
LED: Compatible
Finish: Oil Rubbed Bronze/Natural Brass
Power Source: Hardwired
Country of Origin: China
Light Direction: Ambient
Back Plate Material: Stainless Steel Product Care: Damp Cloth
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Manufacturer Co.
Mfg. Part # BWS-101
Submittal Items
Page 2 of 3
PDF Image
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Mfg. Part # BWS-141
Submittal Items
PDF Image, Shop Drawings
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-102
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-100
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-104
Submittal Items
PDF Image
Page 3 of 3
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-109
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-118
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # F-100
Submittal Items
Prototype
Subtotal 71,260.00
Sales Tax (8.25%) 0.00
Total (USD) 71,260.00
Debbie's
Design LLC
Model #: BWS-101
Model Name: Bedside Wall Sconce - Allen
Description: One-light wall sconce with round backplate and curling arm with clear glass shade.
Dimensions: Shade 9.5”H x 5”W x 6.13”D
Overall: 9.5”H x 5”W x 6.13”D
Back Plate: 6”H x 5”W
Overall Weight: 2.5 lb.
Specifications: Product Type: Armed Sconce
Dry, Damp or Wet Location Listed: Dry
Shade Included: Yes
Shade Material: Glass
Shade Color: Clear
Shade Shape: Drum/Cylinder
Number of Lights 1
Dimmable: No
Bulb Included: No
Maximum Wattage (per Bulb) 60 Watts
Bulb Base: E12/Candelabra
Power Source: Hardwired
Country of Origin: China
Light Direction: Up
UL Listed: Yes
Page 1 L.B.02
Design LLC
Page 2 L.B.02
Design LLC
Model #: DL-100
Model Name: Desk Lamp – Princeton
Page 1 L.D.02
Design LLC
Item Quantity: 35 EA
Manufacturer: Maker, Inc. Vendor:
Model #: DL-104
Model Name: Desk Lamp – York
Page 1 L.D.03
Design LLC
Item Quantity: 35 EA
Manufacturer: Maker, Inc. Vendor:
Model #: DL-109
Model Name: Desk Lamp – Eton
Page 1 L.D.04
Design LLC
Item Quantity: 9 EA
Manufacturer: Maker, Inc. Vendor:
Model #: DL-118
Model Name: Desk Lamp – Cambridge
Page 1 L.D.05
Design LLC
Item Quantity: 4 EA
Manufacturer: Maker, Inc. Vendor:
Model #: F-100
Model Name: Floor Lamp- Hampton
Specifications
Manufacturer Maker, Inc.
Mfg. Part # BWS-100
Additional Specifications
Specifications:
Product Type: Swing Arm
Dry, Damp or Wet Location Listed: Dry
Shade Included: No
Fixture Material: Stainless Steel
Number of Lights: 1
Voltage: 120 Volts
Dimmable: Yes
Maximum Wattage (per Bulb): 100 Watts
Bulb Base: E26/Medium (Standard)
Bulb Included: No
Bulb Type: Incandescent; LED; CFL
LED: Compatible
Finish: Oil Rubbed Bronze/Natural Brass
Power Source: Hardwired
Country of Origin: China
Light Direction: Ambient
Back Plate Material: Stainless Steel Product Care: Damp Cloth
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Manufacturer Co.
Mfg. Part # BWS-101
Submittal Items
Page 2 of 3
PDF Image
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Mfg. Part # BWS-141
Submittal Items
PDF Image, Shop Drawings
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-102
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-100
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-104
Submittal Items
PDF Image
Page 3 of 3
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-109
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-118
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # F-100
Submittal Items
Prototype
Subtotal 68,763.00
Sales Tax (8.25%) 0.00
Total (USD) 68,763.00
Debbie's
Design LLC
Model #: BWS-101
Model Name: Bedside Wall Sconce - Allen
Description: One-light wall sconce with round backplate and curling arm with clear glass shade.
Dimensions: Shade 9.5”H x 5”W x 6.13”D
Overall: 9.5”H x 5”W x 6.13”D
Back Plate: 6”H x 5”W
Overall Weight: 2.5 lb.
Specifications: Product Type: Armed Sconce
Dry, Damp or Wet Location Listed: Dry
Shade Included: Yes
Shade Material: Glass
Shade Color: Clear
Shade Shape: Drum/Cylinder
Number of Lights 1
Dimmable: No
Bulb Included: No
Maximum Wattage (per Bulb) 60 Watts
Bulb Base: E12/Candelabra
Power Source: Hardwired
Country of Origin: China
Light Direction: Up
UL Listed: Yes
Page 1 L.B.02
Design LLC
Page 2 L.B.02
Design LLC
Model #: DL-100
Model Name: Desk Lamp – Princeton
Page 1 L.D.02
Design LLC
Item Quantity: 35 EA
Manufacturer: Maker, Inc. Vendor:
Model #: DL-104
Model Name: Desk Lamp – York
Page 1 L.D.03
Design LLC
Item Quantity: 35 EA
Manufacturer: Maker, Inc. Vendor:
Model #: DL-109
Model Name: Desk Lamp – Eton
Page 1 L.D.04
Design LLC
Item Quantity: 9 EA
Manufacturer: Maker, Inc. Vendor:
Model #: DL-118
Model Name: Desk Lamp – Cambridge
Page 1 L.D.05
Design LLC
Item Quantity: 4 EA
Manufacturer: Maker, Inc. Vendor:
Model #: F-100
Model Name: Floor Lamp- Hampton
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
1.1 F.A.01 Fabric - Small Arm Chair K 4 YD x 100 = 400 YD 43,900.00
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
2.1 F.A.02 Fabric - Small Arm Chair Q 4 YD x 100 = 400 YD 43,900.00
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
3.1 F.A.03 Fabric - Small Arm Chair S 4 YD x 35 = 140 YD 43,900.00
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
4.1 F.A.04 Fabric - Small Arm Chair C 4 YD x 35 = 140 YD 43,900.00
Page 2 of 2
Submittal Items
Finish Sample-Flowers
Customer's Own Materials
7.1 F.S.02 Fabric - Large Sofa 12 YD x 2 = 24 YD 43,900.00
Subtotal 134,815.00
Sales Tax (8.25%) 0.00
Total (USD) 134,815.00
Page 1 of 2
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
1.1 F.A.01 Fabric - Small Arm Chair K 3.75 YD x 100 = 375 YD 47,000.00
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
2.1 F.A.02 Fabric - Small Arm Chair Q 3.75 YD x 100 = 375 YD 47,000.00
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
3.1 F.A.03 Fabric - Small Arm Chair S 3.75 YD x 35 = 131.25 YD 47,000.00
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
4.1 F.A.04 Fabric - Small Arm Chair C 3.75 YD x 35 = 131.25 YD 47,000.00
Page 2 of 2
Submittal Items
Finish Sample-Flowers
Customer's Own Materials
7.1 F.S.02 Fabric - Large Sofa 12 YD x 2 = 24 YD 47,000.00
Subtotal 143,239.95
Sales Tax (8.25%) 0.00
Total (USD) 143,239.95
Page 1 of 2
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
1.1 F.A.01 Fabric - Small Arm Chair K 4 YD x 100 = 400 YD 47,900.00
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
2.1 F.A.02 Fabric - Small Arm Chair Q 4 YD x 100 = 400 YD 47,900.00
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
3.1 F.A.03 Fabric - Small Arm Chair S 4 YD x 35 = 140 YD 47,900.00
Submittal Items
Flame Certificate, Seaming Diagram
Customer's Own Materials
4.1 F.A.04 Fabric - Small Arm Chair C 4 YD x 35 = 140 YD 47,900.00
Page 2 of 2
Submittal Items
Finish Sample-Flowers
Customer's Own Materials
6.1 F.S.02 Fabric - Large Sofa 12 YD x 2 = 24 YD 47,900.00
Subtotal 135,110.00
Sales Tax (8.25%) 0.00
Total (USD) 135,110.00
Page 1 of 1
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Subtotal 17,340.80
Sales Tax (8.25%) 0.00
Total (USD) 17,340.80
Page 1 of 1
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Subtotal 18,316.00
Sales Tax (8.25%) 0.00
Total (USD) 18,316.00
Page 1 of 1
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Subtotal 18,139.96
Sales Tax (8.25%) 0.00
Total (USD) 18,139.96
Page 1 of 1
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 1
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Subtotal 16,989.00
Sales Tax (8.25%) 0.00
Total (USD) 16,989.00
Page 1 of 1
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Subtotal 20,100.00
Sales Tax (8.25%) 0.00
Total (USD) 20,100.00
Page 1 of 3
Specifications
Manufacturer Maker, Inc.
Mfg. Part # BWS-100
Additional Specifications
Specifications:
Product Type: Swing Arm
Dry, Damp or Wet Location Listed: Dry
Shade Included: No
Fixture Material: Stainless Steel
Number of Lights: 1
Voltage: 120 Volts
Dimmable: Yes
Maximum Wattage (per Bulb): 100 Watts
Bulb Base: E26/Medium (Standard)
Bulb Included: No
Bulb Type: Incandescent; LED; CFL
LED: Compatible
Finish: Oil Rubbed Bronze/Natural Brass
Power Source: Hardwired
Country of Origin: China
Light Direction: Ambient
Back Plate Material: Stainless Steel Product Care: Damp Cloth
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Manufacturer Co.
Mfg. Part # BWS-101
Submittal Items
Page 2 of 3
PDF Image
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Mfg. Part # BWS-141
Submittal Items
PDF Image, Shop Drawings
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-102
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-100
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-104
Submittal Items
PDF Image
Page 3 of 3
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-109
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # DL-118
Submittal Items
PDF Image
Attachments
Spec
Specifications
Manufacturer Maker, Inc.
Mfg. Part # F-100
Submittal Items
Prototype
Subtotal 73,547.00
Sales Tax (8.25%) 0.00
Total (USD) 73,547.00
Debbie's
Design LLC
Model #: BWS-101
Model Name: Bedside Wall Sconce - Allen
Description: One-light wall sconce with round backplate and curling arm with clear glass shade.
Dimensions: Shade 9.5”H x 5”W x 6.13”D
Overall: 9.5”H x 5”W x 6.13”D
Back Plate: 6”H x 5”W
Overall Weight: 2.5 lb.
Specifications: Product Type: Armed Sconce
Dry, Damp or Wet Location Listed: Dry
Shade Included: Yes
Shade Material: Glass
Shade Color: Clear
Shade Shape: Drum/Cylinder
Number of Lights 1
Dimmable: No
Bulb Included: No
Maximum Wattage (per Bulb) 60 Watts
Bulb Base: E12/Candelabra
Power Source: Hardwired
Country of Origin: China
Light Direction: Up
UL Listed: Yes
Page 1 L.B.02
Design LLC
Page 2 L.B.02
Design LLC
Model #: DL-100
Model Name: Desk Lamp – Princeton
Page 1 L.D.02
Design LLC
Item Quantity: 35 EA
Manufacturer: Maker, Inc. Vendor:
Model #: DL-104
Model Name: Desk Lamp – York
Page 1 L.D.03
Design LLC
Item Quantity: 35 EA
Manufacturer: Maker, Inc. Vendor:
Model #: DL-109
Model Name: Desk Lamp – Eton
Page 1 L.D.04
Design LLC
Item Quantity: 9 EA
Manufacturer: Maker, Inc. Vendor:
Model #: DL-118
Model Name: Desk Lamp – Cambridge
Page 1 L.D.05
Design LLC
Item Quantity: 4 EA
Manufacturer: Maker, Inc. Vendor:
Model #: F-100
Model Name: Floor Lamp- Hampton
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 1
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 1
Subtotal 215,940.20
Sales Tax (8.25%) 0.00
Total (USD) 215,940.20
Page 1 of 3
Purchaser Comments
Notes
1 Year Warranty, PO Terms/Conditions, Tax Policy
Specifications
Manufacturer Fairfield Chair Company
Additional Specifications
LHF/RHF Chaise size: W 212 x D 148 x H 84 cm
Seat height: 45 cm.
Seat depth: 55 cm.
Seat cushion thickness: 20 cm.
Armrest height: 62 cm.
Leg height: 15 cm.
Item weight: 50 kg
Material:
Upholstery: 100% polyester (260 gsm).
Filling: spring coils, foam.
Internal frame: wood.
Legs: metal.
Certifications: BS5852
Care instructions: Wipe clean with a soft cloth. Do not use chemical based abrasive cleaning materials.
Assembly Required: Yes, very simple assembly.
Customer's Own Materials
1.1 G.F.T-001 STONEHAM - LIGHT GREY 50.91 FAB x 2 = 101.82 FAB 1,800.02
Specifications
Manufacturer Fabricut
Additional Specifications
Page 2 of 3
Designer:Abraham Moon
Collection:LegacyProduct code:U1298/X15
Colour:Light Grey
Type:Wool
Width:137cm
Composition:100% Pure New Wool
End use:Severe domestic & general contract upholstery and curtains
Rub test:36,000
2 G.F.T-003 Duke Dining Chair, Light Grey Classic 2 SF --- 100.75 201.50
Linen-Weave Fabric & Grey Solid
Hardwood
Notes
1 Year Warranty, PO Terms/Conditions, Tax Policy
Specifications
Manufacturer Maker, Inc.
Additional Specifications
Upholstery: Linen weave - 100% polyester
Frame material: Sustainable solid hardwood (rubberwood) from managed plantations
Specifications
Manufacturer Fabricut
Additional Specifications
Designer:Abraham Moon
Collection:LegacyProduct code:U1298/X15
Colour:Light Grey
Type:Wool
Width:137cm
Composition:100% Pure New Wool
Page 3 of 3
Notes
1 Year Warranty, PO Terms/Conditions, Tax Policy
Specifications
Manufacturer Fabricut
Additional Specifications
Designer:Abraham Moon
Collection:LegacyProduct code:U1298/X15
Colour:Light Grey
Type:Wool
Width:137cm
Composition:100% Pure New Wool
End use:Severe domestic & general contract upholstery and curtains
Rub test:36,000
Subtotal 2,408.80
Sales Tax (8.25%) 0.00
Total (USD) 2,408.80
Notes
1 Year Warranty
Applies To: All Items
All products on this purchase order must be warranted for one year against defects in materials and workmanship.
PO Terms/Conditions
Applies To: All Items
This purchase order is subject to the Terms and Conditions in the attached document.
Tax Policy
Applies To: All Items
Tax is based on the final destination of the product.
Page 1 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Page 2 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings, Strike-Off
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Page 2 of 2
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Shop Drawings
Specifications
Manufacturer Maker, Inc.
Mfg. Part # ST-100
Additional Specifications
Top Material: Manufactured Wood
Top Material Details: MDF and veneers
Base Material: Solid & Manufactured Wood
Base Material Details: Poplar and MDF
Base Wood Construction Details: Poplar
Drawers: Yes
Number of Drawers: 3
Drawer Glide Material: Wood
Shelves Included: Yes
Number of Shelves: 1
Top Color: Dark Brown
Base Color: Dark Brown
Country of Origin: China
Submittal Items
PDF Image
Specifications
Manufacturer Manufacturer Co.
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 1
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 2
Specifications
-Material: Upholstered in either fabric or leather. - Style:
Modern/Contemporary design. - Dimensions: Width: 33", Depth: 33",
Height: 36"; Arm Style: V-Shaped arms with upholstert covering.
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Submittal Items
Cutting for Approval, Flame Certificate
Subtotal 0.00
Sales Tax (8.25%) 0.00
Page 2 of 2
Attachments
Spec
Attachments
Spec
Specifications
Manufacturer Fairmont Designs Hospitality
Additional Specifications
a
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Project Name: Boston Harbor Hotel Item Number: PRS-200.B-SGF
Project #: 1520 Item Description: Leather @ Desk Chair Inside Seat and 1
Back
Issue Date: 10/28/16 Area Name: Presidential Suite
Item Quantity: sq ft
Manufacturer: Moore & Giles Source: Moore & Giles
Address: 1081 Tannery Row Address: 1081 Tannery Row
Forest VA 24551 Forest VA 24551-
Phone: 434-846-5281 800# : 800-737-0169 Phone: (310) 922-4031 800#: (800) 737-0169
Fax: 434-846-1404 Fax: (434) 846-1404
Contact: Contact: Ceci Rosen
E-mail: E-mail: ceci@mooreandgiles.com
Web: mooreandgilesinc.com Web: www.mooreandgiles.com
Description: Leather @ Desk Chair Inside Seat and Back
Quantity to be Confirmed by Purchaser
COM Requirements to be Determined by Manufacturer
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: TMP
Seaming Diagram Strike-Off Finish Sample Cutting Shop Dwgs Prototype Flame Certificate
Instructions:
1 All items must comply with Ownership's Interior Finish Standards and sfa design Finish Preamble.
2 Must comply with all applicable federale, state and local codes and standards, including but not limited to
NFPA 260 & Cal 117.
3 Manufacturer to coordinate all details with designer prior to fabrication.
4 Manufacturer to notify designer of any discrepancies.
5 All CFA's and correspondence must be properly sidemarked with project name, area and specification item
number.
6 Submit CFA's to sfa for written approval as outlined in Preamble.
7 Must be first quality, free of defect and from full roll bolts.
8 Must be pre-shrunk, non-fading and non-crocking per Preamble.
9 Upholsterer to verify actual fabric requirement prior to purchase.
10 Printing, dyeing and finishing methods shall be appropriate for fabric use.
11 Flame Resistance: Must meet NFPA 260, Class 1 requirements and pass Cal-117 standards.
Page 1 PRS-200.B-SGF
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Project Name: Boston Harbor Hotel Item Number: PRS-200.B-SGF
Project #: 1520 Item Description: Leather @ Desk Chair Inside Seat and 2
Back
Issue Date: 10/28/16 Area Name: Presidential Suite
Item Quantity: sq ft
Manufacturer: Moore & Giles Source: Moore & Giles
Instructions:
12 Soil Resistance: Finish must include water-based products such as Scotchguard, Dupont Teflon or equivalent
treatment.
Page 2 PRS-200.B-SGF
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Project Name: Boston Harbor Hotel Item Number: PRS-200.B-SGF
Project #: 1520 Item Description: Leather @ Desk Chair Inside Seat and 3
Back
Issue Date: 10/28/16 Area Name: Presidential Suite
Item Quantity: sq ft
Manufacturer: Moore & Giles Source: Moore & Giles
01
Page 3 PRS-200.B-SGF
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Project Name: Boston Harbor Hotel Item Number: PRS-201.A-SGF
Project #: 1520 Item Description: Fabric @ Presidential Suite Living Room1
Sofa
Issue Date: 10/28/16 Area Name: Presidential Suite
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: TMP
Seaming Diagram Strike-Off Finish Sample Cutting Shop Dwgs Prototype Flame Certificate
Instructions:
1 All items must comply with Ownership's Interior Finish Standards and sfa design Finish Preamble.
2 Must comply with all applicable federale, state and local codes and standards, including but not limited to
NFPA 260 & Cal 117.
3 Manufacturer to coordinate all details with designer prior to fabrication.
4 Manufacturer to notify designer of any discrepancies.
5 All CFA's and correspondence must be properly sidemarked with project name, area and specification item
number.
6 Submit CFA's to sfa for written approval as outlined in Preamble.
Page 1 PRS-201.A-SGF
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Project Name: Boston Harbor Hotel Item Number: PRS-201.A-SGF
Project #: 1520 Item Description: Fabric @ Presidential Suite Living Room2
Sofa
Issue Date: 10/28/16 Area Name: Presidential Suite
Item Quantity: 30 yds
Manufacturer: Pindler Source: Pindler
Instructions:
7 Must be first quality, free of defect and from full roll bolts.
8 Must be pre-shrunk, non-fading and non-crocking per Preamble.
9 Upholsterer to verify actual fabric requirement prior to purchase.
10 Printing, dyeing and finishing methods shall be appropriate for fabric use.
11 Flame Resistance: Must meet NFPA 260, Class 1 requirements and pass Cal-117 standards.
12 Soil Resistance: Finish must include water-based products such as Scotchguard, Dupont Teflon or equivalent
treatment.
Page 2 PRS-201.A-SGF
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Project Name: Boston Harbor Hotel Item Number: PRS-201.A-SGF
Project #: 1520 Item Description: Fabric @ Presidential Suite Living Room3
Sofa
Issue Date: 10/28/16 Area Name: Presidential Suite
Item Quantity: 30 yds
Manufacturer: Pindler Source: Pindler
01
Page 3 PRS-201.A-SGF
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Page 1 of 1
Attachments
Spec
Notes
1 Year Warranty, Quality Standards
Specifications
Manufacturer Fairmont Designs Hospitality
Submittal Items
Cutting for Approval-test
Specifications
Manufacturer Fairmont Designs Hospitality
Additional Specifications
a
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Notes
1 Year Warranty
Applies To: A-BP-001
All products on this purchase order must be warranted for one year against defects in materials and workmanship.
Quality Standards
Applies To: A-BP-001
All products are free from defects and deficiencies. We set our quality standards to ensure that we deliver superior products and
services.
Debbie's
Design LLC
Address: Address City, State, Zip Address: Address City, State, Zip
Phone: Phone Number Phone: Phone Number
Fax: Fax Number Fax: Fax Number
Instructions:
1.
2.
3.
4.
5.
6.
7.
Page 1 A-BP-001
Debbie’s Design 444 Main Any city, Any state 89899 p 123-345-4567
Debbie's
Design LLC
8.
9.
10.
11.
12.
Page 2 A-BP-001
Debbie’s Design 444 Main Any city, Any state 89899 p 123-345-4567
Page 1 of 1
Submittal Items
Cutting for Approval, Flame Certificate
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 1
Specifications
Manufacturer Fairmont Designs Hospitality
Additional Specifications
a
Attachments
Spec
Specifications
Mfg. Part # S131-1
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Project Name: Boston Harbor Hotel Item Number: PRS-200-SG
Project #: 1520 Item Description: Desk Chair @ Presidential Suite Living 1
Room
Issue Date: 10/28/16 Area Name: Presidential Suite
Item Quantity: 1 ea
Manufacturer: Quintus Home Source: Quintus Home
Address: 749 North La Brea Avenue Address: 749 North La Brea Avenue
Los Angeles CA Los Angeles CA
Phone: (323) 634-1924 Phone: (323) 634-1924
Fax: Other: (310) 897-5874 Fax: Mobile: (310) 897-5874
Contact: Lee-Ann Kirkendale Contact: Lee-Ann Kirkendale
E-mail: leeann@quintushome.com E-mail: leeann@quintushome.com
Web: www.quintushome.com Web: www.quintushome.com
Description: Desk Chair @ Presidential Suite Living Room
Quantity to be Confirmed by Purchaser
COM Requirements to be Determined by Manufacturer
Desk Chair to Not Have Nail Head Trim
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: TMP
Seaming Diagram Strike-Off Finish Sample Cutting Shop Dwgs Prototype Flame Certificate
Instructions:
1 All items must comply with Ownership's Interior Finish Standards and sfa design Finish Preamble.
2 Manufacturer to coordinate all details with Designer prior to fabrication.
3 Must comply with all applicable federal, state, and local codes and standards.
4 Manufacturer to submit shop drawings to sfa design prior to production.
5 Upholsterer is responsible to supply accurate COM quantities based on the actual specified fabric size and
repeats.
Page 1 PRS-200-SG
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Project Name: Boston Harbor Hotel Item Number: PRS-200-SG
Project #: 1520 Item Description: Desk Chair @ Presidential Suite Living 2
Room
Issue Date: 10/28/16 Area Name: Presidential Suite
Item Quantity: 1 ea
Manufacturer: Quintus Home Source: Quintus Home
Instructions:
6 Frames: Fabricate from solid hardwoods, kiln dried to a moisture content of 7 to 9%. Solid Hardwoods: #1
common grade. Frame Species: For exposed wood frame, provide maple or European beech.
7 Lumber must be kiln-dried to the average moisture content appropriate for the end use and location.
8 Finishes must withstand heat, acid and water stains.
9 All seams are to be double machine stiched with pre-shrunk threads.
10 Heavy-duty contract quality construction to include double dowel and glue joints and mortise tenoned
fabrication when necessary.
11 Manufacturer to provide structurally sound product, free of defect, and suitable for commercial use.
12 Notify Designer of any discrepancies.
13 All shop drawings and correspondence must be properly sidemarked with project name, area, and
specification item number.
14 Construction: Refer to sfa FF&E Casegood Preamble for fabrication & assembly details.
15 Construction: All joints to be firmly attached, sanded, cleaned and polished smooth. Excess residue will not
be acceptable.
16 Construction: All metal parts shall be guaranteed against rust and corrosion.
17 Purchaser to verify field quantity prior to purchasing.
18 Stretchers: Includes, where necessary, to provide support to legs such as dining and desk chairs.
19 Springs: Provide sinous 8 gauge wire springs in seats and 10 to 12 gauge in seating backs. Attach springs with
steel clips. Cover seat spirngs with steel wire flexolator or equal product.
20 Provide sufficient quanity of springs to ensure even weight distribution during use. Provide sufficient quality
springs to retain 95% memory for five years.
21 Foam: Pass the requirements of California Bulletin 117. For seat cushions, provide 1.8 minimum density, ILD 26-
30. On backs, provide minimum of 1.5 density, ILD 15.
22 Cover foam with 1 inch layer of Dacron batting. Provide sufficient foam quality to retain 85% memory for five
years.
23 Treat finish materials to protect from water and soil, fire/smoke and similar types of damage.
Page 2 PRS-200-SG
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Project Name: Boston Harbor Hotel Item Number: PRS-200-SG
Project #: 1520 Item Description: Desk Chair @ Presidential Suite Living 3
Room
Issue Date: 10/28/16 Area Name: Presidential Suite
Item Quantity: 1 ea
Manufacturer: Quintus Home Source: Quintus Home
01
Page 3 PRS-200-SG
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Page 1 of 1
Specifications
- Material: solid hardwood such as oak, maple or cherry . -
Size: 60-78" W x 36-44" D x 30-36" H.
Specifications
- Material: solid hardwood such as oak, maple or cherry . -
Size: 60-78" W x 36-44" D x 30-36" H.
Specifications
- Material: solid hardwood such as oak, maple or cherry . -
Size: 60-78" W x 36-44" D x 30-36" H.
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 1
Specifications
Manufacturer Fairmont Designs Hospitality
Additional Specifications
a
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 1
Specifications
Manufacturer Fairmont Designs Hospitality
Additional Specifications
a
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 1
Attachments
Spec
Notes
1 Year Warranty, Quality Standards
Specifications
Manufacturer Fairmont Designs Hospitality
Submittal Items
Cutting for Approval-test
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Notes
1 Year Warranty
Applies To: All Items
All products on this purchase order must be warranted for one year against defects in materials and workmanship.
Quality Standards
Applies To: All Items
All products are free from defects and deficiencies. We set our quality standards to ensure that we deliver superior products and
services.
Debbie's
Design LLC
Address: Address City, State, Zip Address: Address City, State, Zip
Phone: Phone Number Phone: Phone Number
Fax: Fax Number Fax: Fax Number
Instructions:
1.
2.
3.
4.
5.
6.
7.
Page 1 A-BP-001
Debbie’s Design 444 Main Any city, Any state 89899 p 123-345-4567
Debbie's
Design LLC
8.
9.
10.
11.
12.
Page 2 A-BP-001
Debbie’s Design 444 Main Any city, Any state 89899 p 123-345-4567
Page 1 of 1
Specifications
Manufacturer Manufacturer Co.
Submittal Items
Finish Sample, Shop Drawings, Strike-Off
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 1
Notes
1 Year Warranty
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Subtotal 5,000.00
Sales Tax (8.25%) 0.00
Total (USD) 5,000.00
Notes
1 Year Warranty
Applies To: All Items
All products on this purchase order must be warranted for one year against defects in materials and workmanship.
Page 1 of 1
Notes
3 Year Warranty, Substitutions
Specifications
Manufacturer Maker, Inc.
Submittal Items
Cutting for Approval-Pink Flower
Subtotal 3,500.00
Sales Tax (8.25%) 0.00
Total (USD) 3,500.00
Notes
3 Year Warranty
Applies To: All Items
All products on this purchase order must be warranted for three years against defects in materials and workmanship.
Substitutions
Applies To: All Items
All substitutions of materials and/or product must be submitted for written approval prior to manufacturing and purchasing. If
substitution is executed without written approval, no responsibility or liability for the new selection will be assumed.
Page 1 of 3
Notes
1 Year Warranty
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Notes
Order Approval, Quality Standards, Substitutions
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Notes
5 Year Warranty, Order Approval
Specifications
Manufacturer Manufacturer Co.
Notes
5 Year Warranty, PO Terms/Conditions
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Notes
1 Year Warranty
Specifications
Manufacturer Manufacturer Co.
Submittal Items
PDF Image
Notes
5 Year Warranty, Order Approval
Specifications
Manufacturer Manufacturer Co.
Specifications
Manufacturer Manufacturer Co.
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 3 of 3
Notes
1 Year Warranty
Applies To: C.B.01, C.B.01
All products on this purchase order must be warranted for one year against defects in materials and workmanship.
5 Year Warranty
Applies To: C.B.03, C.B.04, C.B.03
All products on this purchase order must be warranted for five years against defects in materials and workmanship.
Order Approval
Applies To: C.B.02, C.B.03, C.B.03
All POs are to be sent to the company project manager for review and approval.
PO Terms/Conditions
Applies To: C.B.04
This purchase order is subject to the Terms and Conditions in the attached document.
Quality Standards
Applies To: C.B.02
All products are free from defects and deficiencies. We set our quality standards to ensure that we deliver superior products and
services.
Substitutions
Applies To: C.B.02
All substitutions of materials and/or product must be submitted for written approval prior to manufacturing and purchasing. If
substitution is executed without written approval, no responsibility or liability for the new selection will be assumed.
Page 1 of 1
Notes
1 Year Warranty
Specifications
Manufacturer Maker, Inc.
Mfg. Part # 122888
Comments
Testing and saving
Submittal Items
Cutting for Approval-Pink Flower
Attachments
Spec
Attachments
Spec
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Notes
1 Year Warranty
Applies To: B.B.01.b
All products on this purchase order must be warranted for one year against defects in materials and workmanship.
Project Name: Boston Harbor Hotel Item Number: PRS-201.A-SGF
Project #: 1520 Item Description: Fabric @ Presidential Suite Living Room1
Sofa
Issue Date: 10/28/16 Area Name: Presidential Suite
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: TMP
Seaming Diagram Strike-Off Finish Sample Cutting Shop Dwgs Prototype Flame Certificate
Instructions:
1 All items must comply with Ownership's Interior Finish Standards and sfa design Finish Preamble.
2 Must comply with all applicable federale, state and local codes and standards, including but not limited to
NFPA 260 & Cal 117.
3 Manufacturer to coordinate all details with designer prior to fabrication.
4 Manufacturer to notify designer of any discrepancies.
5 All CFA's and correspondence must be properly sidemarked with project name, area and specification item
number.
6 Submit CFA's to sfa for written approval as outlined in Preamble.
Page 1 PRS-201.A-SGF
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Project Name: Boston Harbor Hotel Item Number: PRS-201.A-SGF
Project #: 1520 Item Description: Fabric @ Presidential Suite Living Room2
Sofa
Issue Date: 10/28/16 Area Name: Presidential Suite
Item Quantity: 30 yds
Manufacturer: Pindler Source: Pindler
Instructions:
7 Must be first quality, free of defect and from full roll bolts.
8 Must be pre-shrunk, non-fading and non-crocking per Preamble.
9 Upholsterer to verify actual fabric requirement prior to purchase.
10 Printing, dyeing and finishing methods shall be appropriate for fabric use.
11 Flame Resistance: Must meet NFPA 260, Class 1 requirements and pass Cal-117 standards.
12 Soil Resistance: Finish must include water-based products such as Scotchguard, Dupont Teflon or equivalent
treatment.
Page 2 PRS-201.A-SGF
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Project Name: Boston Harbor Hotel Item Number: PRS-201.A-SGF
Project #: 1520 Item Description: Fabric @ Presidential Suite Living Room3
Sofa
Issue Date: 10/28/16 Area Name: Presidential Suite
Item Quantity: 30 yds
Manufacturer: Pindler Source: Pindler
01
Page 3 PRS-201.A-SGF
sfa design 136 W. Canon Perdido Suite #220 Santa Barbara, CA 93101 p. 805.692.1948 f. 805.692.9293
Page 1 of 2
Attachments
Spec
Specifications
Manufacturer Manufacturer Co.
Notes
1 Year Warranty
Specifications
Manufacturer Maker, Inc.
Submittal Items
Cutting for Approval-Pink Flower
Notes
5 Year Warranty, Order Approval
Specifications
Manufacturer Maker, Inc.
Submittal Items
Cutting for Approval-Red Flower
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Notes
1 Year Warranty
Applies To: B.B.01-p
Page 2 of 2
All products on this purchase order must be warranted for one year against defects in materials and workmanship.
5 Year Warranty
Applies To: B.B.02
All products on this purchase order must be warranted for five years against defects in materials and workmanship.
Order Approval
Applies To: B.B.02
All POs are to be sent to the company project manager for review and approval.
Debbie's
Design LLC
Item Quantity 2 EA
Address: Address City, State, Zip Address: Address City, State, Zip
Phone: Phone Number Phone: Phone Number
Fax: Fax Number Fax: Fax Number
Instructions:
1.
2.
3.
4.
5.
6.
7.
Page 1 A-BP-001
Debbie’s Design 444 Main Any city, Any state 89899 p 123-345-4567
Debbie's
Design LLC
Item Quantity 2 EA
8.
9.
10.
11.
12.
Page 2 A-BP-001
Debbie’s Design 444 Main Any city, Any state 89899 p 123-345-4567
Page 1 of 2
Specifications
Manufacturer Sandler Seating Inc.
Additional Specifications
Finish: W2 Standard Walnut
Wood Species: Maple
Direction of Grain: Horizontal
Edge Detail: Eased edge / square corners
Notes: To coordinate with 1302ALTB Base
Dimensions: 30" Diameter x 1.25" Thick
Pattern Number: Model 390 Series
Pattern Name: Plank Style table top
Ship To: Purchasing to confirm
Specifications
Manufacturer Sandler Seating Inc.
Additional Specifications
Finish: S18 Satin Black
Height: 34"
Notes: - To coordinate with 1302ALTA Table top
- Includes commercial grade glides
Dimensions: 2: Column, 16" x 16" mounting plate; 26" x 26" base spread
Pattern Number: Model 1400 series: 1426-2LS
Pattern Name: Cross steel plate table bases
Ship To: Purchasing to confirm
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Page 1 of 1
Notes
5 Year Warranty, Order Approval
Specifications
Manufacturer Maker, Inc.
Submittal Items
Cutting for Approval-Red Flower
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Notes
5 Year Warranty
Applies To: All Items
All products on this purchase order must be warranted for five years against defects in materials and workmanship.
Order Approval
Applies To: All Items
All POs are to be sent to the company project manager for review and approval.
Page 1 of 2
Attachments
Grande Oceanic Hotel, Golf Resort & Spa (GO) - Spec Package.pdf
Notes
Quality Standards
Specifications
Manufacturer Maker, Inc.
Notes
3 Year Warranty
Specifications
Manufacturer Maker, Inc.
Submittal Items
Cutting for Approval-Flowers
Notes
3 Year Warranty
Specifications
Manufacturer Maker, Inc.
Submittal Items
Cutting for Approval-Flowers
Customer's Own Materials
3.1 B.B.06 Queen Bedframe 12 EA x = EA
Notes
3 Year Warranty
Specifications
Manufacturer Maker, Inc.
Page 2 of 2
Subtotal 0.00
Sales Tax (8.25%) 0.00
Total (USD) 0.00
Notes
3 Year Warranty
Applies To: B.B.06, B.B.06b
All products on this purchase order must be warranted for three years against defects in materials and workmanship.
Quality Standards
Applies To: B.B.05
All products are free from defects and deficiencies. We set our quality standards to ensure that we deliver superior products and
services.
Grande Oceanic Hotel, Golf Resort & Spa (GO)
Specification Report
04/17/2023
Specifications
Description: High back winged lounge chair with tight cushions and throw pillow. Frame of chair to have 1/4" fabric self
welt. Tapered square wood legs.
Model Number: Charter #: 500-2795B-HGI Southfield #: 1920-1
Finish: Legs: Stained to match Wilsonart Fine Velvet Texture Finish
Laminate #7992-38 Pinnacle Walnut,
Width: 2'-8" Depth: 3'-0"
Height: 4'-0" Arm Height: 2'-2 1/2"
Seat Height: 1'-7" Seat Cushion Style: Tight and non-removable. Cushions to
be adequately vented for
displacement of air and to provide increased comfort. Back Cushion Style: Tight back
Fabric Details: Fabric @ Lounge Chair (Seat Vinyl @ Interior and Self (Outside Seat Back):
Lounge Chair Welt):
Manufacturer: Valley Forge FabricsManufacturer: Pattern: Bravo TexturePattern: 5512 MG
Kravet
Color: 300-SRSColor: Lace Finish: Soil and Stain RepellentFinish: EZ Kleen
Fire Rating: CAL 117Fire Rating: UFAC Class 1 Content: 100% PolyesterContent: 100% PVC
Width: 54"Width: 54" Repeat: N/ARepeat: N/A
Double Rubs: 50,000+Double Rubs: 100,000+ Backing: AcrylicBacking: 100% Polyester
COO: TurkeyCOO: China Railroad: NoRailroad: No
Pillow Quantity: 1 Coordinating (B) GR-101.1
Items:
Design Approval Requirements
N/A
Specifications
Description: Beach Painting Model Number: 123
Materials: xxx Size: 7x7x7
Color: yyy Finish: zzz
Pattern: cbcbcbcbc Safety Rating: 400
Tuft: 20 Hardware: yes
Mounting: no
Design Approval Requirements
N/A
Specifications
Description: Golf Painting Model Number: 123
Materials: xxx Size: 7x7x7
Color: yyy Finish: zzz
Pattern: cbcbcbcbc Safety Rating: 400
Tuft: 20 Hardware: yes
Mounting: no
Design Approval Requirements
N/A
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
Specifications
Description: Floral Painting
Model Number: 123
Materials: xxx
Size: 7x7x7
Color: yyy
Finish: zzz
Pattern: cbcbcbcbc
Safety Rating: 400
Tuft: 20
Hardware: yes
Mounting: no
Specifications
Description: Urn Painting
Model Number: 123
Materials: xxx
Size: 7x7x7
Color: yyy
Finish: zzz
Pattern: cbcbcbcbc
Safety Rating: 400
Tuft: 20
Hardware: yes
Mounting: no
Specifications
Description: Urn Painting
Model Number: 123
Materials: xxx
Size: 7x7x7
Color: yyy
Finish: zzz
Pattern: cbcbcbcbc
Safety Rating: 400
Tuft: 20
Hardware: yes
Mounting: no
Specifications
Description: Vase Painting
Model Number: 123
Materials: xxx
Size: 7x7x7
Color: yyy
Finish: zzz
Pattern: cbcbcbcbc
Safety Rating: 400
Tuft: 20
Hardware: yes
Mounting: no
Bedframe King BF -
Category: Bed Frames
Specifications
Description: Bedframe King Model Number:
Materials: Color:
Finish: Pattern:
Safety Rating: Tuft:
Hardware: Mounting:
Design Approval Requirements
N/A
Specifications
Charcoal finish. 2000 lbs capacity.
Design Approval Requirements
Shop Drawings
Manufacturer and Source
Vendor: The Robert Allen Group
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
Order Approval
All PO are to be sent to the company project manager for review and approval.
Purchase Orders
All purchase orders are sent to the Project Manager and reviewed within 2 business days.
Specifications
Model Number: 123 Materials: xxx
Color: yyy Finish: zzz
Pattern: cbcbcbcbc Safety Rating: 400
Tuft: 20 Hardware: yes
Mounting: no
Design Approval Requirements
N/A
Specifications
Description: Bedframe King Model Number: 123
Materials: xxx Size: 7x7x7
Color: yyy Finish: zzz
Pattern: cbcbcbcbc Safety Rating: 400
Tuft: 20 Hardware: yes
Mounting: no
Design Approval Requirements
N/A
Manufacturer and Source
Vendor: Frank's Furniture
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Notes
1 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
Specifications
Description: Bedframe King Model Number: 123
Materials: xxx Size: 7x7x7
Color: yyy Finish: zzz
Pattern: cbcbcbcbc Safety Rating: 400
Tuft: 20 Hardware: yes
Mounting: no
Design Approval Requirements
N/A
Notes
1 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
Specifications
Description: Bedframe King Model Number: 123
Materials: xxx Size: 7x7x7
Color: yyy Finish: zzz
Pattern: cbcbcbcbc Safety Rating: 400
Tuft: 20 Hardware: yes
Mounting: no
Design Approval Requirements
N/A
Manufacturer and Source
Manufacturer: ABC Maker
Part #:
Phone:
Fax:
Contact: None
Phone:
Email:
Notes
1 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
Specifications
Charcoal finish. 2000 lbs capacity.
Design Approval Requirements
Shop Drawings
Manufacturer and Source
Manufacturer: La-Z-Boy Vendor: Durkan
Part #:
Address: 405 Virgil Drive
Dalton, GA 30721
Phone: Phone: 800-241-4580
Fax: Fax:
Contact: Lazareth Boyson Contact: Kevin Powell
Phone: 391-999-1999 Phone: 182-182-1822
Email: l.b@lazboy.com Email: kevin.Powell@durkan.com
Specifications
Model Number: 123 Materials: xxx
Color: yyy Finish: zzz
Pattern: cbcbcbcbc Safety Rating: 400
Tuft: 20 Hardware: yes
Mounting: no
Design Approval Requirements
N/A
Specifications
Description: Bedframe Queen Model Number: 123
Materials: xxx Size: 7x7x7
Color: yyy Finish: zzz
Pattern: cbcbcbcbc Safety Rating: 400
Tuft: 20 Hardware: yes
Mounting: no
Design Approval Requirements
N/A
Manufacturer and Source
Vendor: Charlie's Chairs
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
Specifications
Description: Bedframe Queen Model Number: 123
Materials: xxx Size: 7x7x7
Color: yyy Finish: zzz
Pattern: cbcbcbcbc Safety Rating: 400
Tuft: 20 Hardware: yes
Mounting: no
Design Approval Requirements
Cutting for Approval
Manufacturer and Source
Manufacturer: ABC Maker
Part #: 123
Phone:
Fax:
Contact: None
Phone:
Email:
Notes
1 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
STOOL-COUNTER-BEDFORD-1756MG-CINNAMON-17.5"W BR-201
Total Quantity: 605 EA
Category: Seating
Specifications
ITEM: COUNTER STOOL MODEL #: BEDFORD COUNTER STOOL
DIMENSIONS: W: 17.5" D: 23" H: 39.75" SH: 24" FLAMMABLITY: MUST BE SERTIFIED TO COMPLY WITH
CALIFORNIA TECHNICAL BULLETIN
117-2013 AND BE SO LABELLED.
NON-EXPOSED DECIDUOUS HARDWOOD WOOD PIECES: BEECH
FRAME:
COLOR: UV ANILINE BLACK EXPOSED FRAME GAR PRODUCTS FINISH (SEALER & TOP
FINISH: COAT)ON FRAME; WATER BASED FINISH
CURED BY ULTRAVIOLET ENERGY
TOUCH UP KIT
FOR FRAME
CONTAINS:
**NOTE: ONE TOUCH UP KIT PER FINISH PER HOTEL WILL BE PROVIDED WITH THE INITIAL ORDER AT NO ADDITIONAL
COST.**
STRETCHERS: 4 BEECH STRETCHERS 1" X .8"
DIMENSIONS:
TOP CAP/BACK: DIMS: 2.375" H X 16 7/8" W X 1.2" THICK MINIMUM OFFSET ON ALL EXPOSED WOOD JOINTS TO PREVENT
FINISH ISSUES.
GLIDES: METAL R/C (4) ADHESIVE: YELLOW CARPENTERS GLUE FOR ALL
WOOD JOINTS, WATER BASED
MOISTURE ALL EDGES TO BE SEALED FOR
RESISTANCE: MOISTURE RESISTANCE.
UPHOLSTERY: 2" FOAM SEAT WITH A LAYER OF POLYESTER BATTING,VINYL MATERIAL PULLED, STRETCHED AND STAPLED.
SEAT UNDERSTRUCTURE CLOSED WITH A LAYER OF BUCKRAM. STRAPPED WEBBING STAPLED TO 1/2"
PLYWOOD SEAT PANEL.
PRIMARY (SEAT & BACK) MFR: KRAVET
UPHOLSTERY:
PATTERN: 1756 MG COLOR: CINNAMON (MI#233819)
FLAMMABILITY: MUST BE CERTIFIED TO PASS CALIFORNIA TECHNICAL BULLETIN 117-2013 AND NFPA-260, WITH TEST
RESULTS AVAILABLE UPON REQUEST.
TOP COAT FINISH: STA KLEEN ROLL SIZE: 30 YDS
CLEANING CODE: COO: TAIWAN
YARDAGE 2.25 YDS FINISHED GOODS CONTAINING
REQUIRED: COMPOSITE WOODS MUST COMPLY
WITH CALIFORNIA CODE OF REGULATIONS 93120. PRODUCT ANDCARTONS MUST BE LABELLED IN ACCORDANCE WITH
THEREGULATION.
Chair C-01
Total Quantity: 20 EA
Category: Seating
Specifications
Attached polymer cushion backing; moisture barrier. 3.5 kV max electrostatic propensity. Grade 4 on the Gray Scale for Color
Change.
Design Approval Requirements
Mat Sample
Manufacturer and Source
Vendor: Carlson's Carpets
Specifications
Attached polymer cushion backing; moisture barrier. 3.5 kV max electrostatic propensity. Grade 4 on the Gray Scale for Color
Change.
Design Approval Requirements
Mat Sample
Manufacturer and Source
Vendor: Carlson's Carpets
Booth CG-B-001
Total Quantity: 36 EA
Category: Casegoods
Specifications
4 foot length, 25" seat; mahogany finish.
Booth CG-B-002
Total Quantity: 8 EA
Category: Casegoods
Specifications
3 foot length, 25" seat; light mahogany finish.
Credenza CG-C-001
Total Quantity: 6 EA
Category: Casegoods
Specifications
Light mahogany, matte finish.
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
Limited Warranty
Limited Warranty covers any defects in material or workmanship under normal use during the warranty period.
Debbie Designer Address for Submittals
Please Send all Submittals to: 123 Main St., Anytown, Anystate, Anyzip
Front CG-CD-001
Total Quantity: 1 EA
Category: Casegoods
Specifications
Description: Concierge Desk Model Number: 123
Materials: xxx Size: 7x7x7 Color:
yyy Finish: zzz
Pattern: cbcbcbcbc Safety Rating: 400 Tuft:
20 Hardware: yes Mounting: no
Specifications
2 shelves; one drawer. Ash, matte finish.
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Specifications
2 shelves; one drawer. Ash, matte finish.
Design Approval Requirements
N/A
Address:
Phone:
Fax:
Contact: None
Phone:
Email:
Specifications
6 drawer. Adjustable height.
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Specifications
Dark mahogany. Glossy finish. USB and outlet port
cut-outs.
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Specifications
2-drawer. USB and outlet port.
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Specifications
Light mahogany. Moulded legs. 2 drawers.
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Specifications
Light mahogany. Moulded legs. 2 drawers.
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Specifications
Style Number: Y10387Color: A: 5830D, B: CA164Width or Rug Size: 13'-6"Inline scroll loop & cut (yamaRepeat: 72" W x
48"LContent: NSP Eco Sol Q NylonWeight: 32 oz / yd 2Primary Backing: Woven PolypropoleneSecondary
Backing: Ulraloc PatternPile Height 0.25 inGauge: 1/10Stitches Per Inch: 11.83/inDye Method: Solution
DyedInstallation Method: Over PadBinding: N/ANotes: Carpet must side seam/match.Seaming diagrams for
all room types must be submitt ed to designer before production/fabrication. Floods should show seams as
well as carpet pattern.
Design Approval Requirements
Seaming Diagram Strike-Off
Manufacturer and Source
Manufacturer: Shaw Hospitality
Part #: Y10387
Address:
Phone:
Fax:
Contact: None
Phone:
Email:
Notes
1 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
Double Queen DQ
Category: Room Types
Specifications
Acrylic backing; nanotex finish. 100,000 double rubs
abrasion finish.
Specifications
Acrylic backing; nanotex finish. 100,000 double rubs
abrasion finish.
Address: RR 3
Grand Rapids, MI 49555
Phone: 800-550-4314
Fax:
Contact: Douglas Washington
Phone: (811) 862-6210
Email: douglas.w2@true.com
Specifications
Caramel leather.
Address: RR 3
Grand Rapids, MI 49555
Phone: 800-550-4314
Fax:
Contact: Douglas Washington
Phone: (811) 862-6210
Email: douglas.w2@true.com
Specifications
coffee leather. stain protected.
Address: RR 3
Grand Rapids, MI 49555
Phone: 800-550-4314
Fax:
Contact: Douglas Washington
Phone: (811) 862-6210
Email: douglas.w2@true.com
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
King Suite KS
Category: Room Types
Specifications
Dimensions: Max Extension Length: 17.2 Overall: 13.1 H x 5 W x 5 D Back Plate: 5H x 5W x .75D Overall Weight: 7 lb.
Specifications: Product Type: Swing Arm Dry, Damp or Wet Location Listed: Dry Shade Included: No Fixture Material:
Stainless Steel Number of Lights: 1 Voltage: 120 Volts Dimmable: Yes Maximum Wattage (per Bulb): 100
Watts Bulb Base: E26/Medium (Standard) Bulb Included: No Bulb Type: Incandescent; LED; CFL LED:
Compatible Finish: Oil Rubbed Bronze/Natural Brass Power Source: Hardwired Country of Origin: China
Page 1
Design Approval Requirements
PDF Image
Manufacturer and Source
Manufacturer: Manufacturer, Inc.
Part #: Model #: BWS-102
Address:
Phone:
Fax:
Contact: None
Phone:
Email:
Notes
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
Specifications
Model #: BWS-100 Model Name: Bedside Wall Sconce
Description: Metal with oil rubbed bronze and Dimensions:
natural brass finish, adjustable arm,
openwork cage shade.
Max Extension 17.2” Overall: 13.1” H x 5” W x 5” D
Length:
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
Specifications
Description: One armed sconce with rust scavo glass Dimensions: Overall: 19.75H x 5W x 6D
shade in backdrop of olde black finished
steel.
Back Plate: 7.75H x 5W Overall Weight: 6 lb.
Specifications: Product Type: Armed Sconce Dry, Damp or Dry
Wet Location
Listed:
Shade Included: Yes Shade Material: Glass
Shade Color: Clear Shade Shape: Drum/Cylinder
Fixture Material: Metal Material Details: Stainless Steel
Number of Lights: 1 Dimmable: No
Bulb Included: No Maximum 100 Watts
Wattage (per
Bulb):
Bulb Base: E26 Medium (Standard) Voltage: 120 Volts
Power Source: Hardwired LED: Compatible
Design Approval Requirements
N/A
Manufacturer and Source
Manufacturer: Manufacturer, Inc.
Part #: BWS-14
Address:
Phone:
Fax:
Contact: None
Phone:
Email:
Notes
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
Specifications
Model #: MC-100 Model Name: Medium Chandelier
Description: Globe chandelier holds six 60 W bulbs (not included ) atop candle-esque fixtures with multi-faceted
clear crystals.
Dimensions: Canopy: 1.375” H x 5.875”W x 5.875”D
Fixture: 31.375”H x 26” W x 26” D Overall Weight: 19.58 lb.
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
Specifications
Bulb Base: E26/Medium (Standard) Bulb Included: No
Cord Length: 60” Country of Origin: China
Switch Type: 3 - Way Swing Arm: Yes
Theme: Pattern Shade Included: yes
Shade Shape: Bell; Oval
Design Approval Requirements
Shop Drawings PDF Image
Manufacturer and Source
Manufacturer: Maker, Inc.
Part #: TTL-100
222 Broadway
City, State Zip
Phone: (123)456-7890
Fax: (123)456-7891
Contact: None
Phone:
Email:
Notes
1 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
Comments
Product Type: Standard
Base Color: White/Cream
Base Material: Resin
Details: Polyresin
Number of Lights: 1 Maximum Wattage (per Bulb) 100 Watts
Specifications
Product Type: Standard Base Material: Resin
Base Material Polyresin Number of Lights: 1
Details:
Dimmable: No Maximum 60 Watts
Wattage (per
Bulb):
Bulb Base: E26/Medium (standard) Bulb Included:
No
Design Approval Requirements
Shop Drawings PDF Image
Manufacturer and Source
Manufacturer: Maker, Inc.
Part #: STL-100
222 Broadway
City, State Zip
Phone: (123)456-7890
Fax: (123)456-7891
Contact: None
Phone:
Email:
Notes
1 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
Comments
PDF
Specifications
Description: Shell and sea star motifs adorn the poly-resin base , a neutral white and cream finish, and a bell-
shaped shade.
Dimensions: Overall: 30”H x 6.5”W x 4.25”D
Base: 16”H x 6.5”W x 4.25”D Shade: 9.6”D x 16”W x 11”H
Overall Weight: 5.25 lb. Specifications:
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
5 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (5) five years from the date of purchase.
Chandelier L-C-001
Total Quantity: 20 EA
Category: Lighting
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
Specifications
DIMENSIONS
Overall: 32" wide x 17" deep x 30" high
Top Drawer 25" wide x 12" deep x 3.5" high
Interior (1):
Middle/Bottom 25" wide x 12" deep x 6" high
Drawer Interior
(2):
Distance 27.5", (side to side): 13"
Between Legs
(front to back):
Legs: 4" high
Distance 13" (front/back); 27.5" (at sides)
between legs:
Top Drawer Weight Capacity; 18 pounds
Middle/Bottom 35 pounds
Drawer Weight
Capacity:
Weight Capacity: 200 pounds Weight: 79.5 pounds
Packaging 35 x 19.5 x 30" high; 95.25 pounds CARE AND MAINTENANCE
Dimensions &
Weight:
Dust with a soft, dry cloth. Blot spills immediately with a clean, dry cloth.
Avoid the use of furniture polish, harsh chemicals or Hardware may loosen overtime, periodically check
abrasive cleaners. connections and retighten if necessary.
Design Approval Requirements
Finish/Moulding Sample - Sample
Manufacturer and Source
Manufacturer: Maker, Inc.
Part #: 98765
222 Broadway
City, State Zip
Phone: (123)456-7890
Fax: (123)456-7891
Contact: None
Phone:
Email:
Notes
Quality Standards
All products are free from defects and deficiencies. We set our quality standards to ensure that we deliver superior products
and services.
Additional Imagery
Revision Date: 05/15/2020 Page 93 of 133 NS-01
Nightstand Pull
Specifications
Width: 26" Height: 32"
Design Approval Requirements
N/A
Manufacturer and Source
Vendor: Frank's Furniture
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Notes
1 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
Order Approval
All PO are to be sent to the company project manager for review and approval.
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Features
Product Type
Loveseat
Design
Standard
Seating Capacity
Design
2 Approval Requirements
Flame Certificate
Upholstery Material
Microfiber/Microsuede
Manufacturer and Source
Leg Color
Manufacturer:
Black Maurie's Manufacturing
Part #:
Frame Material
AnyCity,
Solid Wood
AnyState
Wood 10001
Species
Phone:
Eucalyptus
Fax:Material
Leg
Contact:
Plastic Maurie Mauritius
Phone:
Seat Fill Material
Email:
Foam maurie@mauritius.com
Revision Date:
Seat Fill 05/14/2020
Material Details Page 108 of 133 S-200.1
Foam/Spring
Additional Imagery
+Microsuede+56.3%22+Flared+Arms+Loveseat.jpg
Specifications
Charcoal castors. 3-way adjustibility.
Design Approval Requirements
Finish/Moulding Sample
Manufacturer and Source
Vendor: Thibaut
Sofa S-S-001
Total Quantity: 5 EA
Category: Seating
Specifications
bear claw feet, high arched back and moulded arms.
Design Approval Requirements
Finish Sample PDF Image
Manufacturer and Source
Vendor: Frank's Furniture
Address: 1234
123, 1234 1234
Phone: 109-298-0000
Fax:
Contact: Frank Franklin
Phone: 222-111-2221
Email: F2@F2.com
Specifications
Butterfly back; 7 spindles; straight legs.
Design Approval Requirements
N/A
Manufacturer and Source
Vendor: Durkan
Chair STG-01
Category: Seating
Specifications
Repeating pattern.
Design Approval Requirements
N/A
Manufacturer and Source
Vendor: Tom's Tiling
Specifications
Oak; glossy finish; water resistant.
Design Approval Requirements
N/A
Manufacturer and Source
Vendor: Tom's Tiling
Address: Street
City, State Zip
Phone:
Fax:
Contact: None
Phone:
Email:
Address: 13 E. 13th
Allcity, Allstate 13333
Phone: 133-133-1333
Fax:
Contact: Hamilton French
Phone: 133-133-1333
Email: h.french@hfurnishings.com
Notes
1 Year Warranty
The Warranty Period for physical goods purchased from Right Way Purchasing is (1) one year from the date of purchase.
Address: 13 E. 13th
Allcity, Allstate 13333
Phone: 133-133-1333
Fax:
Contact: Hamilton French
Phone: 133-133-1333
Email: h.french@hfurnishings.com
Address: 13 E. 13th
Allcity, Allstate 13333
Phone: 133-133-1333
Fax:
Contact: Hamilton French
Phone: 133-133-1333
Email: h.french@hfurnishings.com
Notes
Quality Standards
All products are free from defects and deficiencies. We set our quality standards to ensure that we deliver superior products
and services.
Address: 13 E. 13th
Allcity, Allstate 13333
Phone: 133-133-1333
Fax:
Contact: Hamilton French
Phone: 133-133-1333
Email: h.french@hfurnishings.com
Address: Street
City, State Zip
Phone:
Fax:
Contact: Grady Great
Phone:
Email: grady@great.com
Address: 111
333
sss, ddd 44444
Phone:
Fax:
Contact: Sojita South
Phone:
Email: sojita@south.com