Professional Documents
Culture Documents
DT24PW: HD Color Screen Battery/power Supply 2 - in - 1 Tester
DT24PW: HD Color Screen Battery/power Supply 2 - in - 1 Tester
accord After connecting this meter and long press the addition and minus buttons at the same B+
time, the capacity of this meter is cleared zero, Battery Pack Red than fine wires Connected to load
The cumulative measurement of the cumulative measurement when the battery is out of power ( 8 ~ 240V) B+ or power supply
through this meter is the storage capacity of the battery. Or Power Supply B- P-/C- Bidirectional current
sampler C - (Charging negative)
Users should first look at the instructions to use or call the manufacturer's technicians to seek ( 0 ~ 240V) P - (Output negative)
help and explanation !!! B- 7è89:
(To realize the cut-off function, the relay must be (Need to be posted on the surface of the battery) 000363A
007205W
independent of the productSupply 9~12V voltage 000350Ω
to have enough power to drive the relay) 000670
Data cable 031200Ah 39%
Run Time : 0000 : 19 : 25 Ex.T028.6 BatRes : 36.2 mΩ
Full.V : 24.27V
0 019 85+V Zero.V : 17.39V Note: Please strictly follow the icon. The sampler must be
000363A connected in the negativecircuit of the battery. The connection Control panel
007205W is strictly prohibited!The data cable on the panelcan be extended by itself as needed, which does
not affect the data transmission and measurement accuracy.
000350Ω 1)The sampler of this Meter must be connected to the negative electrode circuit of the battery pack. The B-
000670 connecting the negative electrode B-connecting the battery pack on the sampler B and the P-terminal
031200Ah 39%
Run Time : 0000 : 19 : 25 Ex.T028.6 BatRes : 36.2 mΩ
connected to the negative pole P-/C-.
2)The red wire connects the battery positive electrode to the sampler B+to display the power supply and
voltage sampling of this meter.
4)Wiring principle: Be sure to ensure that all current flowing through the battery pass through the sampler!
Reminder: The battery pack B-to the sampler B-this wire is as short as possible as much as possible as possible
to ensure that the measurement is more accurate!