Professional Documents
Culture Documents
Processing Equipment and Utilities
Processing Equipment and Utilities
Coating Room 1
2 connections for
dishwasher, 1 for
Sink
dispensing, 1 for milliQ
water
QC Area Stability chambers 3 access point
Item# Equipment name Access points Compressed Air Process Air Equipment Air CFM
Roller Compaction Room Freund Vector TFC 220 Pilot Scale Roller Compactor 1 compressed air 57 LPM @ 6 bar yes 2
Tablet Compression Press Korsch XL100 Pro 8 bar and 200 L/min of consumption process air 7
Tabletting Room 2
Tablet deduster (KD3010) - 250 Compressed air (p = 1.5 – 2 bar) l/min 50 – 100 Process Air 3.5
Coating Room O'hara Pan Coater LC-M50 + exhaust filter unit 1 68 Nm³/h @ 6 bar (40 SCFM @ 90psi) Process Air 40
QC Area Fumehood Connection in the fumehood for drying equipments 1 Not known Process Air 5
119.5
Code in the Weight System Impact Darft Execute
Item# Equipment name Type Dimension Electrical requirement Comments Purchase Order Status URS SAT IOQ BOM PM ETOP PM Schedule
drawing (kg) Classification Assessment PQP PQP
wet granulation
1 Quadro SDx-U5 Comil 25 kg 16 3/4” x 16 3/4” x 16 5/8” [425 x 425 x 422] 120 - 230 V, frequency 50 – 60 Hz, 0.55 kW (0.75hp) cone mill N/A
room
Freund Vector Blender (Pilot Blender) Model# MG5- 5-amp service required – 575V/60Hz/3Phase (4 kW is power
2 blending room 550 kg 3210 L x 2900 W x 1500 H mm IBC blender ORDER
6BC requirement)
Freund Vector TFC 220 Pilot Scale Roller roller compaction Power consumption: 20-amp service required –
3 998 kg 945 W x 1858 H x 1493 D mm compressed air 57 LPM @ 6 bar ORDER
Compactor room 575V/60Hz/3Phase
7 Table Top Balance (Metler Tolerdo) qty: 8 5.2 kg 333 L x 206 W x 355 H mm 115 V, 60 Hz, 0.6A N/A- benchtop equipment
8 Balance (XSR16000L) qty: 1 412 L x 360 W x 122 H mm N/A- benchtop equipment
9 Hot plate lab stirrer qty: 2 4.54 kg 279 L x 177.8 W x 127 H mm 41W @ 120V , 50-60 Hz, 1 PH N/A- benchtop equipment
10 Overhead Stirrer NANOSTAR 7.5 digital x2 coating suspension preparation N/A- benchtop equipment
Silverson Laboratory Mixer L5M-A (homogenizer) x
11 5 kg 305 L x 508 W x 940 H mm 750 W @ 110V, 60 Hz, 1 PH N/A- benchtop equipment
3
12 Sotax Tablet Hardness and Thickness Tester AT50 Tabletting room 30 kg 404 W x 177 H x 288 D mm 110V, 50-60 Hz, 4A N/A- benchtop equipment
13 Sotax FT2 Friability Tester Tabletting room 8 kg 305 W x 475 H x 280 D mm 110V, 50-60 Hz, 2A N/A- benchtop equipment
14 Sotax TD1 Tap Density Tester Tabletting room 9 kg 230 W x 790 H x 300 D mm 110V, 50-60 Hz, 2A, N/A- benchtop equipment
15 Sotax DT2 Disintegration Tester Tabletting room 23 kg 370 W x 550 H x 410 D mm 110V, 60 Hz, 10A N/A- benchtop equipment
16 Jet Mill GMP01 (Yongqiang will check with CFS) 20 kg 500 L x 350 W x 400 H (mm) No need for electricity Needs compressed air (0.5~300g/h), dust collection N/A- benchtop equipment
Compressed air: 0.5 m3 at 5 bar or 3 m3 at 5 bar, vacuum
Encapsulation 400 V ±10% , 50/60 Hz, Connection: 3 phase +PE, total
17 GFK702 encapsulator Syntegon 2006 x 805 x 1298 mm requirement 19m3 at 0.2 to 0.5 bar. Suction air N/A-2nd phase
room performance 2.5 kW, connection electric load: 4-5 KVA
requirement: 200 m3 at 1.500 mm water column
Encapsulation Will be purhased one year later.Needs Clean dry air 3-5
18 SADE checkweigher (SP140) 944D x 808W x 1461H 115/230 VAC 50/60 Hz N/A-2nd phase
room bar or 43-73PSI
Encapsulation
19 ProFiller 1100 Encapsulator IMA brand - 4.8 Kg 21 x 19 x 10 cm manual encapsulator N/A-2nd phase
room
High Shear Granulator (25 Litres) GMXB-Pilot wet granulation Compressed air 57 LPM @ 5.5 bar
20 865 kg 2159 W x 1666 H x 822 D mm 380-460 VAC, 50-60 Hz, 3 PH, 45 AMP circuit required N/A-2nd phase
GRANUMEIST® (Freund Vector) room
wet granulation Power consumption: 35-amp service required –
21 Freund Vector VFC-Lab 3XL flo-coater 954 kg 2952 H x 2054 W x 1092 D Compressed Air Supply: 50 m³/hr @ 6 bar N/A-2nd phase
room 575V/60Hz/3Phase
Encapsulation Power Supplyn110 V, 50/60 Hz - 230V, 50/60 Hz, Peak current Compressed air (p = 0.5 – 1 bar) l/min 50 – 100
23 Capsule Polisher KCP10 - 800 55 kg 1465H x 726 w mm N/A-2nd phase
room 4-2 A Air extraction (pu = 10 – 20 mbar) m3/h 100 – 150
tabletting
24 Metal detector CEIA - model THS/PH21E room/encapsulati 1100H x 716W x 550D mm N/A-2nd phase
on room
Mains input voltage (Vac)230 (+10% / -15%) , Phase 1 Phase +
packaging room Compressed air 6-8 Bar/ 87-116 Psi, compressed air
25 Cremer CF 1220 - Fills up to 55 bottles per minute. 500 Kg 2849 L x 2127 H x 450 W N + PE, Frequency (Hz) 50 ~ 60, Total power consumption (VA N/A-2nd phase
for bottle consumption 50 L/min
Max.) 1325
26 Sepha EZ Blister
27 Compressed Air System
28 Air Handling Unit 1
29 Air Handling Unit 2
30 Air Handling Unit 3
31 Air Handling Unit 4
32 Air Handling Unit 5
33 Purified Water System
34 Electrical Panels
35
36
37
38