Professional Documents
Culture Documents
TDS 109609
TDS 109609
TDS 109609
Areas of application Plastic abrasives were originally developed for the aero-
space industry. They are used for the cleaning or paint-
■ Reusable abrasive, fine abrasive, stripping of surfaces, without changing the treated
wet abrasive, dry abrasive substrate.
■ Deburring
■ Paint stripping Physical properties
■ Surface cleaning without loss of substance
Hardness TYPE II Barcol 54 – 65 (3.5 mohs)
Blasting systems Hardness TYPE III Barcol 64 – 72 (4.0 mohs)
Hardness TYPE V Barcol 46 – 54 (3.2 – 3.5 mohs)
■ Pressure blast systems Grain shape angular
■ Injector blast cabinets Melting point < 500°C
■ Wheel blasting systems Specific gravity approx. 1.5 g/cm3
Bulk density* approx. 0.8 – 0.9 g/cm3
Packaging
*depending on granular size
Customer approvals
■ CSS227 (Rolls-Royce)
MESH Grain size range (mm) MESH Grain size range (mm)
Comment: For safety reasons, we recommend that you use a protective strainer when filling the blasting equipment.
www.kuhmichel.com