Professional Documents
Culture Documents
Instant Download PDF Agricultural Mechanics Fundamentals and Applications 7th Edition Herren Test Bank Full Chapter
Instant Download PDF Agricultural Mechanics Fundamentals and Applications 7th Edition Herren Test Bank Full Chapter
https://testbankfan.com/product/agricultural-mechanics-
fundamentals-and-applications-7th-edition-herren-solutions-
manual/
https://testbankfan.com/product/fluid-mechanics-fundamentals-and-
applications-4th-edition-cengel-solutions-manual/
https://testbankfan.com/product/fluid-mechanics-fundamentals-and-
applications-3rd-edition-cengel-solutions-manual/
https://testbankfan.com/product/fundamentals-of-fluid-
mechanics-7th-edition-munson-solutions-manual/
Management Fundamentals Concepts Applications and Skill
Development 7th Edition Lussier Test Bank
https://testbankfan.com/product/management-fundamentals-concepts-
applications-and-skill-development-7th-edition-lussier-test-bank/
https://testbankfan.com/product/management-fundamentals-concepts-
applications-and-skill-development-7th-edition-lussier-solutions-
manual/
https://testbankfan.com/product/agriscience-fundamentals-and-
applications-6th-edition-burton-test-bank/
https://testbankfan.com/product/reinforced-concrete-mechanics-
and-design-7th-edition-wight-solutions-manual/
https://testbankfan.com/product/ecology-concepts-and-
applications-7th-edition-molles-test-bank/
UNIT 8—LAYOUT TOOLS AND PROCEDURES
MULTIPLE CHOICE
1. What is the first choice of material used for making cutting tools?
a. cloth c. steel
b. aluminum d. wood
ANS: C
steel
PTS: 1
2. When enlarging a pattern, a _____ of horizontal and vertical lines is drawn over the original pattern.
a. grid c. group
b. marker d. set
ANS: A
grid
PTS: 1
ANS: D PTS: 1
4. What is the traditional unit of measurement for woodworking and metalworking in the United States?
a. meter c. millimeter
b. foot d. inch
ANS: D PTS: 1
ANS: C PTS: 1
COMPLETION
1. ____________________ is the second choice of material for use in many layout tools.
ANS: Aluminum
PTS: 1
PTS: 1
ANS: accuracy
PTS: 1
4. One table found on many framing squares helps to calculate the ____________________ feet in a
piece of lumber.
ANS: board
PTS: 1
ANS: computer
PTS: 1
6. A level that uses a strong beam of light is called a(n) ____________________ level.
ANS: laser
PTS: 1
MATCHING
1. ANS: E PTS: 1
2. ANS: C PTS: 1
3. ANS: I PTS: 1
4. ANS: A PTS: 1
5. ANS: N PTS: 1
6. ANS: K PTS: 1
7. ANS: J PTS: 1
8. ANS: G PTS: 1
9. ANS: B PTS: 1
10. ANS: D PTS: 1
11. ANS: F PTS: 1
12. ANS: M PTS: 1
13. ANS: L PTS: 1
14. ANS: H PTS: 1
SHORT ANSWER
ANS:
It breaks easily and does not wear well.
PTS: 1
PTS: 1
ANS:
folding rule
PTS: 1
ANS:
to guide the builder
PTS: 1
5. Why is it so important to take extra care when squaring corners on a large work area?
ANS:
The larger the area, the larger the error can be.
PTS: 1
6. How can you tell whether the four corners of a rectangle are square?
ANS:
Measure the distance diagonally from corners.
PTS: 1
ANS:
Create a grid, and re-create the new image in proportion to the old.
PTS: 1
ANS:
to develop detailed drawings of the project
PTS: 1
ANS:
Layout tools are used for guiding the worker when cutting, sawing, drilling, shaping, or fastening. A
pattern is prepared for future operations.
PTS: 1
ANS:
Three techniques for making a pattern are tracing, drawing, or using carbon paper between picture and
a piece of heavy paper.
PTS: 1
ANS:
A chalk line is a cord with chalk applied to it. When the cord is stretched and snapped it leaves a thin
trail of chalk to mark straight lines.
PTS: 1
ANS:
The U.S. Customary System is the standard system of measurement in the United States.
PTS: 1
13. Approximately how many tools are combined in a combination square? Describe each.
ANS:
There are about seven tools in a combination square. This square has two bubbles, one for leveling and
one for plumbing objects, a removable blade for a steel scale and depth gauge, an ordinary square for a
miter square, a scriber, and special heads that make the tool useful for finding the center of round
sects.
PTS: 1
14. Describe two instruments used to make circles and other curved lines.
ANS:
Dividers and scribers are used to make circles and other curved lines. The scriber has one steel leg and
a pencil for the other leg. The divider has two sharp legs.
PTS: 1
15. Discuss one advantage and one disadvantage to plastic measuring devices.
ANS:
One advantage of plastic measuring devices is that they are tough and lightweight. They can be
molded into any shape and are cheap to produce. A disadvantage of plastic measuring devices is their
tendency to melt if touched by a hot object or flame. Also, plastics can be damaged by solvents.
PTS: 1
Another random document with
no related content on Scribd:
The Project Gutenberg eBook of The Black
Panther of the Navaho
This ebook is for the use of anyone anywhere in the United States
and most other parts of the world at no cost and with almost no
restrictions whatsoever. You may copy it, give it away or re-use it
under the terms of the Project Gutenberg License included with this
ebook or online at www.gutenberg.org. If you are not located in the
United States, you will have to check the laws of the country where
you are located before using this eBook.
Language: English