Professional Documents
Culture Documents
Test Data PL1519284
Test Data PL1519284
Model: YLS-3000-CT
S/N: PL1519284
The information and the following charts provided below is the result of tests performed in controlled environments by IPG Photonics. These provided useful, but not warranted,
information about the functions and performance of the product.
Optical Characteristics
Operation Mode CW
Tuning range of output power 10 100 10-100 %
Pmax After Feeding Fiber
Nominal output power or CH1 (if applicable) 3000 3153 Watts
Emission wavelength ( λC ) Pout= Pmax 1065.0 1080.0 1070.3 nm
Emission linewidth ( Δλ ) Pout= Pmax 6.0 3.6 nm
Switching ON time Pout= Pmax ( 500Hz ) 100.0 34.4 µsec.
Switching OFF time Pout= Pmax ( 500Hz ) 100.0 16.8 µsec.
Maximum digital modulation rate Pout=Pnom 5 5 kHz
Maximum analog modulation rate Pout=Pnom 5 5 kHz
Twater=Constant over 8 hours Pout=Pmax
Output power instability ( Pnom ) 2.0 0.2 %
Guide Beam Output Power Pout after process fiber, Beam Coupler 0.1 0.9 0.30 mW
Guide Beam Output Power Pout after process fiber, CH3 0.1 0.9 0.00 mW
Guide Beam Output Power Pout after process fiber, CH4 0.1 0.9 0.00 mW
Guide Beam Output Power Pout after process fiber, CH5 0.1 0.9 0.00 mW
Guide Beam Output Power Pout after process fiber, CH6 0.1 0.9 0.00 mW
General Characteristics
Operating voltage 3P+PE 400 480 480 VAC
Power consumption Laser Only 7.9 kW
Water flow during testing T: 20-22°C 53 I/min
Analog Control and Customer Interfaces Test Results are; Passed, Failed, or N/A
Analog control Passed
Industrial Ethernet ( Communication with PC ) Passed
Fieldbus N/A
Laser ON/OFF ( digital laser modulation ) Passed
Hardwiring ( laser control from robot ) Passed
Chiller functions Passed
All applicable interlocks and safety devices tested Passed
Flow switches tuned and leak tested Passed
Date: 03/25/15
Tested by: R. Doucette
Approved by: D. Irwin
Approved by signature:
3000
Output Power, (W)
2500
2000
1500
1000
500
0
0 10 20 30 40 50 60 70 80 90 100
Current %
3000
Output Power, (W)
2500
2000
1500
1000
500
0
0 1 2 3 4 5 6 7 8 9 10 12
Voltage Applied
Laser Stability
4000
Output Power Temperature 34
3750
32
3500
Output Power
30
3250
28
3000
26
2750
2500 24
2250 22
2000 20
0 1 2 3 4 5 6 7 8
Hours
Beam parameter product after 100um process fiber Serial Number: PFH120544
Beam parameter product after 200um process fiber Serial Number: PF1401250