Professional Documents
Culture Documents
Manuales Automatización
Manuales Automatización
Connection Guide
In order to connect the IV2 Series vision sensor to IV2-Navigator software for the first time,
please perform the following steps:
1 Connect the ethernet cable of the IV2 vision sensor directly to the PC.
2 Open IV2-Navigator and click Network Connection.
3 Select the correct Network Adapter from the dropdown, as shown below:
When the IV2 Series vision sensor cannot be found automatically using this method, please perform the
following steps to allow connection to IV2-Navigator.
c. If the “Allowed apps and features” window is not able to be edited,
click the “Change Settings” button.
d. Make sure all options for IV2-Navigator are checked.
e. If there are multiple instances of IV2-Navigator, check all options for all instances.
IV2-Navigator Connection Guide
IP address : 192.168.100.101*
Subnet mask : 255.255.255.0
*Any IP address can be used
IV2-Navigator Connection Guide
When using the IV2 model vision sensors, the networking reset button can be found in the below location
on the amplifier:
Insert a long and thin pin (1 to 2 mm in diameter) into the screw hole and press the IP reset
switch for about 3 seconds with the power on.
STATUS
indicator
light
The STATUS indicator light will blink twice (orange) and then turn off. The network setting is
initialized.
*If connection still cannot be established after performing the above steps, there is likely a security program on the PC preventing
connection. Please contact your IT department to allow IV2-Navigator software through this security software.
*If connection is not possible with any of the above steps, please try a different PC.
*For any questions or for further troubleshooting, please call 1-888-Keyence Option #2 to contact our Technical Support team.
CALL T O C O N TA C T Y O U R L O C A L O F F I C E
TOLL
FREE
1-888-KEYENCE
1 - 8 8 8 - 5 3 9 - 3 6 2 3
www.keyence.com SAFETY INFORMATION
Please read the instruction manual carefully in
order to safely operate any KEYENCE product.
KEYENCE CORPORATION OF AMERICA KEYENCE CANADA INC. KEYENCE MEXICO S.A. DE C.V.
500 Park Boulevard, Suite 200, Itasca, IL 60143, U.S.A. PHONE: +1-201-930-0100 E-mail: keyence@keyence.com E-mail: keyencecanada@keyence.com E-mail: keyencemexico@keyence.com
The information in this publication is based on KEYENCE’s internal research/evaluation at the time of release and is subject to change without notice. Company and product names mentioned in this catalog are either trademarks or registered trademarks KA11-1109
of their respective companies. The specifications are expressed in metric units. The English units have been converted from the original metric units. Unauthorized reproduction of this catalog is strictly prohibited.
Copyright © 2020 KEYENCE CORPORATION. All rights reserved. IV2navigatorconnectionguide-KA-TG-US 2020-1 611M90