Professional Documents
Culture Documents
Schenck Type CS 30
Schenck Type CS 30
Application Amount and angular position of the Another important advantage of the
unbalance - regardless of the initial CS 30 is the wide range of applica-
The new CS 30 dynamic balancing unbalance - are displayed imme- tion: also any other type of rigid
machine allows high-performance diately on the integrated measuring rotors which do not exceed the
crankshaft manufacturers and over- unit. The CS 30 can carry a rotor limits of geometrical data may be
haul shops to completely balance weight of up to 700 kg. A highly balanced.
crankshafts at one convenient work- efficient underslung belt drive pro-
station. vides short acceleration times, Unbalance correction is made
ensuring short balancing procedu- directly on the CS 30, using the
The CS 30 is a hard-bearing machine res. The compact design of the powerful drilling unit. No unloading
with permanent calibration. Thus a CS 30 requires only little floorspace. of rotors for drill-correction is
new rotor can be directly loaded required.
and balanced after entering just a The machine may be equipped with
few values of the rotor geometry. our measuring unit CAB 700 or
CAB 920 and a printing system.
RM 2526-2 e
Important data at a glance
Machine Basic machine with CAB 700 hard-bearing, with permanent calibration
Distance between correction planes standard distance 800 mm, opt. 1700 mm
CAB 700
Balancing and
Diagnostic Systems
•
Landwehrstraße 55
D-64293 Darmstadt
•
The Group