Professional Documents
Culture Documents
CT844 13 RLT 18x8 T19.05x8.18 F - IFC - R1
CT844 13 RLT 18x8 T19.05x8.18 F - IFC - R1
CT844 13 RLT 18x8 T19.05x8.18 F - IFC - R1
21
WITH HEADER MATERIAL API 5L GR.X60, PSL 2 WITH 3MM ALLOY 625
9.
13 CT844-WO-013 PPTPXTPX0060269 632-SP-2109 INTERNAL CLADDING, BRANCH MATERIAL API 5L GR.X65, PSL 2 WITH 1 EA 368.1 Kg
+2 .6
1
19
3MM ALLOY 625 INTERNAL CLADDING,BRANCRF PAD MATERIAL API
-1
.4
4.
A
7
±0
.
1
in
Q1
.7
m
6
Q2
54
D Welded by Other
B (TYP.) E
423.6 ±1 (TYP.)
45°
B
+4
As Weld Overlayed
UNS N06625
A A (Note 6)
Note 9 Q1, Q2
Note 9 Q1, Q2
C
19.05
550
SCALE 1 : 8
232 ±2 672 min.
SECTION A-A 1
19.05 (Nom.)
SCALE 1 : 8
37.5
Note 3
° ±2 Welded by Other
.5°
UNS N06625
3 min.
D
Welded by Other
11 N
5°
.1 ot
8 e
±2.
(N 5
om
DETAIL E
5°
.)
3 N0
37.
SCALE 1 : 5
N
m 66
S
1.
15.7 (Nom.)
in 2
Note 3 & 4
6
1.6 ±0.8
UNS N06625
.
±0
DISCIPLINE CHECK RETURN TO VENDOR Reviewed By
.8
3 min.
5
ax DETAIL D ENGINEER A. Approved. Fabrication may proceed.
14° m
10 min. °m SCALE 1 : 5
e n.
B. Approved with comments. Vendor to revise
14
the document and resubmit for approval.
ot i
Note 12
12
N 0m
ax.
SCALE 1 : 1
NOTES CONT'D :
9.Off angle (Q) shall be as per ASME B16.9 (2018) Table 11-1 for angularity
ISSUED FOR CONSTRUCTION OTHER D. For Information Only
Date:
tolerances.
10.All other dimensions and tolerances shall be as per ASME B16.9 and DETAIL C 06/03/2024 MDR P.O. NO.: D7068-PO-0921-ALL-PVI20-0003-0-02 P.O. ITEM NO.: 13
Cladtek Bi-Metal Manufacturing
fitting vendor drawing.
11.PMI shall be performed as per SAES-A-206. SCALE 1 : 1 Digitally signed - no signature needed ARAMCO DUMMY P.O NO.: CWCI-631-03-A014-DB NMR SUB-ITEM NO.: 601
12.The bore ID at ends may be machined or ground smooth if necessary to
achieve the required dimension.
NOTES :
1.All dimensions are in millimeter unless otherwise specified. McDermott Middle East Inc.
Dimensions with no tolerance indication are given for reference only. JEBEL ALI P.O. BOX 16961
2. = 12.5 μm Ra, unless otherwise specified.
3.The original CS wall thickness at header ends shall be machined from Dubai, U.A.E.
nominal wall thickness 19.05 mm to nominal wall thickness 12.7 mm prior
to weld overlay.
F
PROJECT
8.Bevel end preparation as per ASME B16.25 (2017). REV DATE REVISION DWN CHK APP APP CLIENT REFERENCE DRAWINGS CT844-DWG-001 CT844-13-RLT-18x8-T19.05x8.18-F - 10-12201-0002 DGN D7068 - - 1 of 1 1