Professional Documents
Culture Documents
Turbocharger - Install (SENR1126-36)
Turbocharger - Install (SENR1126-36)
Installation Procedure
PSP
202 -000A
Table 1
© 2 R112 08:00
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning
fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited
024 6
on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new
parts for replacement. Dirt and other contaminants can damage the precision component. Perform
Cat
assembly procedures on a clean work surface. Keep components covered and protected at all
times.
erp
illa
r In
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the
components, if necessary.
c.
Note: Lubricate all seals with the lubricant that is being sealed.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and
repair of the product. Be prepared to collect the fluid with
suitable containers before opening any compartment or
disassembling any component containing fluids.
https://sis2.cat.com/#/print-preview/service/8b3eda60-5642-4e22-83c5-ca6fbc8a5767 1/3
3/25/24, 3:59 PM SIS 2.0
Illustration 1 g01373959
1. Apply Tooling (A) to the threads of bolts (8) and (9). Attach a suitable lifting device to
turbocharger (7). The weight of turbocharger (7) is approximately 54 kg (120 lb).
Illustration 2 g01373831
Illustration 3 g01373826
https://sis2.cat.com/#/print-preview/service/8b3eda60-5642-4e22-83c5-ca6fbc8a5767 2/3
3/25/24, 3:59 PM SIS 2.0
Illustration 4 g01373847
End By:
a. Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".
PSP-000A4FC7
2024/03/25
07:58:55+08:00
i02741321
© 2024 Caterpillar Inc.
https://sis2.cat.com/#/print-preview/service/8b3eda60-5642-4e22-83c5-ca6fbc8a5767 3/3