Professional Documents
Culture Documents
CV - Mochamad - Juwildia - Prayoga MAECI
CV - Mochamad - Juwildia - Prayoga MAECI
WORK EXPERIENCE
1. Build the upper-body construction design, the tailgate, and the hardtop assembly for PT. Pindad's mass-produced
vehicle.
1. Designed the Upper-body construction of PT. Pindad’s military vehicles prototype, the Front and Rear Fender
Assembly, Rear Body Assembly, Tailgate Assembly, Side Door Assembly, and Interior.
2. Improved the design of the side-door construction, by adjusting the angle of the door to make it fits better into
the side body panel, thus reducing the stress on the door frame and extending the life of the door, the side
window frame construction was also modified, to accelerate the assembly process by 5%.
1. Engineered a new sterilization machine for the sterilization process of mushroom growing medium that replaced
the traditional equipment which took 10 hours for the whole process to only 1 hour for a local small mushroom
farming enterprise in the city of Cimahi.
1. Produced a material handling system design for transferring raw forging crankshaft into the machining line using
a Self-actuated mechanism in which eliminating the need for a working operator to do the job.
Address Gegerkalong Hilir Street, Ciwaruga, Parongpong, West Bandung Regency, Indonesia Website www.polban.ac.id
Field of study Mechanical Engineering Final grade GPA: 3.31/4.00 Number of credits 151
Thesis The Design of Steamer Machine for Sterilization Process of Mushroom Growing Medium
19/05/2011 – 19/05/2014 Bandung, Indonesia
HIGH SCHOOL DIPLOMA Pasundan 1 High School
Address Balonggede Street No.28, Regol, Bandung, Indonesia Field of study Natural sciences, mathematics and statistics
LANGUAGE SKILLS
ENGLISH (IELTS:
7.0/9.0)
C1 C1 B2 B2 B2
Levels: A1 and A2: Basic user; B1 and B2: Independent user; C1 and C2: Proficient user
DIGITAL SKILLS
Document Preparation
Microsoft Word Microsoft Powerpoint Microsoft Office Microsoft Excel Google Docs Google Drive
Cimatron MasterCAM X5
Festo FluidSim
ADDITIONAL INFORMATION
PROJECTS
02/09/2018 – 10/01/2019
The Design and Construction of Tribometer Instrument Designing and constructing a Tribometer Instrument for
measuring the wear rate of material using Pin on Disk mechanism.
04/03/2018 – 03/06/2018
The Design and Construction of UAV Launcher The Unmanned Aerial Vehicle (UAV) often need launcher to assist the
take off. The launcher is constructed from a rectangular beam as the runway, and the UAV holder is attached by the
wheels to the beam. The launch itself utilizes the elasticity of elastic cord.
PUBLICATIONS
01/01/2019 – 02/06/2019
The Design of Steamer Machine for Sterilization Process of Mushroom Growing Medium
04/10/2017 – 03/12/2017
The Design of Material Handling System for transferring Raw Forging Crankshaft into Machining Line using
Semi-Karakuri Mechanism at PT. Toyota Motor Manufacturing Indonesia