Professional Documents
Culture Documents
Safety Instrumented System Test
Safety Instrumented System Test
A) Redundant
B) Dual redundant
C) Non-redundant
D) Triple modular redundant
2. Safety Instrumented System Document used to define full steps of the SIS workflow
is
A) Safety manual
B) Safety Design Document
C) Safety Requirement Specification
D) Layer Of Protection Analysis
12. What is the most critical attribute of a Proof test of an SIS component?
A) Test procedure is provided by SIL-certified vendor
B) The test uses automated tools that are connected to a Computerized
Maintenance Management System
C) Any known dangerous failure mode that is undetectable by automatic diagnosis
would be detected
D) The test is executed in the presence of the equipment danger
13. The ____________ in an Emergency Shutdown valve is used to vent the air to close
the valve
A) Air filter regulator
B) Solenoid valve
C) Digital valve controller
D) Booster relay
16. Maximum time allowed for SIS Repair deferrals with the highest level of approval
A) Irrespective of the Proof test max allowed is 1 year
B) > 50% and < 100% of existing Proof test period
C) >25% of the existing Proof test period
D) >50% of the existing Proof test period
20. Redundant systems composed of identical units, identify which of the below can
significantly influence system performance with regards to reliability.
A) Redundant configuration
B) Reliability analysis tools
C) More than 2 sensor system
D) Common Cause Failures (CCFs)
23. SIS proof test intervals shall be established based upon and SIS configuration
A) Risk reduction factor
B) Mean Time to Repair (MTTR)
C) Safety Integrity Level (SIL)
D) Probability of Failure on Demand
30. A ____ can impact two or more separate elements leading to a total system failure
A) Sensor failure
B) Logic solver failure
C) SIS Failure
D) common cause failure
31. The total probability of failure of an SIS loop is 100% which is in general divided as
below for Sensor, Logic Solver & Final element.
A) Sensor – 50%, Logic solver – 15% & Final element – 35%
B) Sensor – 35%, Logic solver – 15% & Final element – 50%
C) Sensor – 50%, Logic solver – 20% & Final element – 30%
D) Sensor – 30%, Logic solver –35% & Final element – 35%