Professional Documents
Culture Documents
Lottieand Luluspuffstjumper
Lottieand Luluspuffstjumper
Crochet pattern
By @LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
Gauge
13 rows x 16 stitches = 10 cm x 10 cm
Measure the stitches in the centre of your swatch as they will give a
more accurate measurement. When measuring the rows begin
measuring from a sc row.
If your swatch measurement is too small size up your hook until you
get the correct measurement. If your swatch is too big size down
your hook until you get the correct measurements.
The hook that gives you the correct measurement is what you will
need to use so that your jumper comes out the right size.
@LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
Extra small Small Medium
Neck: 27 cm Neck: 32 cm Neck: 37 cm
Chest: 38 cm Chest: 45 cm Chest: 53 cm
Length: 30 cm Length: 35 cm Length: 40 cm
Large X Large
Neck: 42 cm Neck: 47 cm
Chest: 58 cm Chest: 65 cm
Length: 45 cm Length: 50 cm
Materials
5.5mm hook (or hook needed to obtain correct gauge
measurements)
6mm hook (or hook needed to obtain correct gauge
measurements)
4 seasons marvel 8ply acrylic yarn (1, 1, 2, 2, 2) 100g balls (dk,
weight 3, 270 meters per ball)
Measuring tape
Scissors
Tapestry needle
@LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
Pattern notes
This pattern is written in US terms.
It is written (XS, S, M, L, XL).
The numbers in brackets at the end of each row/ round is the stitch
count for that row/ round for each size.
Ch 1 at the beginning of rounds/ rows does not count as a stitch.
Ch 2 at the beginning of rounds only counts as dc when specified.
The yellow jumper in the photos is a size small.
Construction
This jumper is constructed from the top down. First you make the collar
then increase stitches for the chest, add the arm/leg holes and create
the body. Then you will crochet in rows to create the tail of the jumper,
decreasing your stitch count every second row to create a tapered
shape. Finally you will crochet the ribbing on the end of the jumper.
1 2 3 4
5 6 7 8
9 10 11 12
@LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
Collar
**Start with 6mm hook**
Leave a long tail for weaving in at the end. Make a slip knot on hook.
Ch (10, 12, 14, 16, 18)
Row 1: Yoslst in the back hump of the second ch from hook, yoslst in the
back hump of each ch to end of row. (9, 11, 13, 15, 17 st in row)
Row 2: Ch 1 turn, yoslst in the third loop of each st. (9, 11, 13, 15, 17 st in
row)
** When measuring the gauge of your collar please ensure you have done
at least 15 rows of yoslst before measuring the width of your collar
because in the beginning it will measure larger than the listed
measurements for the finished collar.
At the end of the last row turn your work and fold the collar in half.
Insert hook under third loop of the first st then through first ch on the
other end of collar. Sl st. Rep for each st. (9, 11, 13, 15, 17 st in row)
Flip collar so that the seam of sl st is on the inside.
The right side of the collar should now have (25, 29, 33, 37, 41) rows
of vs.
@LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
Collar
In this section of the pattern we will be increasing every second rnd/sc rnd
to create the size of the chest.
Rnd 1: With the seam of the collar flipped to the inside and the right side of
the collar facing you, ch 1, sc around the collar placing one sc for each row
of yoslst. The placement of these stitches is pictured below. The first sc will
be placed into the top of the first column of vs. The second sc will be into
the space in between the first and second column of vs. The third sc will be
placed into the top of the second column of vs and the fourth sc will be
placed into the space between the second and third column of vs. Continue
this pattern to the end of the round. Sl st to first sc of rnd. (50, 58, 66, 74, 82
sc in rnd)
1 2 3 4
@LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
Body
Rnd 2 (increase rnd): Ch 1 do not turn. Sc 2 in first st. Sc (24, 28, 32, 36, 40). Sc
2 in next st. Sc (24, 28, 32, 36, 40). Sl st to first sc of rnd. (52, 60, 68, 76, 84 sc in
rnd)
Rnd 3: Ch 2 turn. Puff st in same st, ch 1. *Sk 1, puff st, ch 1; rep from * (24, 28, 32,
36, 40) times. (26, 30, 34, 38, 42 puff st in rnd). Sk 1. Sl st to beginning puff st of
rnd. (52, 60, 68, 76, 84 st in rnd)
Rnd 3 Rnd 3
Rnd 4 (increase rnd): Ch 1 turn. *Sc (12, 9, 16, 18, 20). Sc 2 in next st; rep from *
(3, 5, 3, 3, 3) times. Sl st to first sc in rnd. (56, 66, 72, 80, 88 sc in rnd)
Rnd 5: Ch 2 turn. Puff st in same st, ch 1. *Sk 1, puff st, ch 1; rep from * (26, 31, 34,
38, 42) times. (28, 33, 36, 40, 44 puff st in rnd). Sk 1. Sl st to beginning of rnd.
(56, 66, 72, 80, 88 st in rnd)
Rnd 6 (increase rnd): Ch 1 turn. *Sc (6, 10, 11, 9, 10). Sc 2 in next st; rep from * (7,
5, 5, 7, 7) times. Sl st to first sc of rnd. (64, 72, 78, 88, 96 sc in rnd)
Rnd 4 Rnd 5 + 6
For size extra small and small skip ahead to *continue for all sizes*
@LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
Continue for sizes medium, large and
extra large
Rnd 7: Ch 2 turn. Puff st in same st, ch 1. *Sk 1, puff st, ch 1; rep from * (0, 0, 37,
42, 46) times. (0, 0, 39, 44, 48 puff st in rnd). Sk 1. Sl st to beginning of rnd. (0, 0,
78, 88, 96 st in rnd)
Rnd 8 (increase rnd): Ch 1 turn. *Sc (0, 0, 12, 21, 23). Sc 2 in next st; rep from *
(0, 0, 5, 3, 3) times. Sl st to first sc of rnd. (0, 0, 84, 92, 100 sc in rnd)
Rnd 10 (increase rnd): Ch 1 turn. *Sc (0, 0, 0, 22, 24). Sc 2 in next st; rep from * 3
times. Sl st to first sc of rnd. (0, 0, 0, 96, 104 sc in rnd)
Rnd 12 (increase rnd): Ch 1 turn. *Sc 25. Sc 2 in next st; rep from * 3 times. Sl st
to first sc of rnd. (0, 0, 0, 0, 108 sc in rnd)
@LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
Continue for all sizes
In this section of the pattern we are creating a panel that sits on your pets
chest in between their legs.
Row (7, 7, 9, 11, 13): Ch 2 (counts as 1 dc), turn. *Sk 1, puff st, ch 1; rep from *
(3, 4, 5, 5, 6) times. Dc in next st (Do not skip a st between last puff st and
dc). (10, 12, 14, 14, 16 st in row) (4, 5, 6, 6, 7 puff stun row)
Row (8, 8, 10, 12, 14): Ch 1 turn. Sc (10, 12, 14, 14, 16). (Last sc should be in to
top of the beginning ch 2 of the previous row.)
Rep row (7, 7, 9, 11, 13) to (8, 8, 10, 12, 14) (1, 1, 1, 1, 2) times.
Armholes
Rnd (11, 11, 13, 15, 19): Ch 2 (counts as first dc), turn.*Sk 1, puff st, ch 1; rep
from * (3, 4, 5, 5, 6) times. Dc in next st. Ch (10, 12, 14, 16, 18), sk (10, 12, 14, 16,
18), dc 1 in next st. This creates the first arm hole. (The stitches you have
skipped are stitches from rnd (6, 6, 8, 10, 12). The following stitches will be
placed along the top of this row.) *Sk 1, puff st, ch 1, rep from * (15, 16, 19, 23,
26) times. Dc in next st (Do NOT sk a st between last puff st and dc.) Ch (10,
12, 14, 16, 18), sk (10, 12, 14, 16, 18), sl st to beginning ch 2 of rnd. This creates
your second arm hole. (64, 72, 84, 96, 108 st in rnd)
Lottie and Lulu’s puff stitch jumper
Rnd (12, 12, 14, 16, 20): Ch 1 turn. Sc (10, 12, 14, 16, 18) through the back
hump of ch. Sc (34, 36, 42, 50, 56). Sc (10 12, 14, 16, 18) through the
back hump of ch. Sc (10, 12, 14, 14, 16). Sl st to the first sc of rnd. (64, 72,
84, 96, 108 sc in rnd)
Rnd (13, 13, 15, 17, 21) : Ch 2 turn. Puff st in same stitch, ch 1. *Sk 1, puff st,
ch 1; rep from * (30, 34, 40, 46, 52 ) times. Sk 1. Sl st to beginning of
rnd. (32, 36, 42, 48, 54 puff st in rnd) (64, 72, 84, 96, 108 st in rnd)
Rnd (14, 14, 16, 18, 22): Ch 1 turn. Sc (64, 72, 84, 96, 108). Sl st to first sc
of rnd. (64, 72, 84, 96, 108 st in rnd)
If you do NOT want to add a harness hole rep rnd (13, 13, 15, 17, 21) +
(14, 14, 16, 18, 22) (5, 6, 7, 8, 9) times. Then continue to tail of jumper
instructions on the next page.
If you DO want to add a harness hole rep rnd (13, 13, 15, 17, 21) + (14,
14, 16, 18, 22) (0, 0, 1, 1, 2) times then continue to rnd (15, 15, 19, 21, 27)
below.
Rnd (15, 15, 19, 21, 27): Ch 2 turn. Puff st in same st, ch 1. *Sk 1, puff st, ch
1; rep from * (18, 20, 24, 28, 32) times. Ch 2, sk 3. Puff st in next st, ch 1. *
Sk 1, puff st, ch 1; rep from * (9, 11, 13, 15, 17) times. Sk 1. Sl st to first st in
round (64, 72, 84, 96, 108 st in rnd)
Rnd (16, 16, 20, 22, 28): Ch 1 turn, sc (64, 72, 84, 96, 108). Sl st to first sc
of round.
** Please note that different harnesses will sit in different places and
you may need to place the harness hole a row forward or back. Test
your jumper on your pet as you are making it to see if the hole is in
the best place for them and their harness. If you move the harness
hole one row forward you will add 1 repeat of (*sk 1, puff st, ch 1)
before adding the hole then one less repeat before you slip stitch the
round closed. If you move it back a row you will do one less repeat
before adding the hole and one more repeat before you slip stitch
the round closed.
@LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
Rnd (17, 17, 21, 23, 29) : Ch 2 turn. Puff st in same stitch, ch 1. *Sk 1, puff
st, ch 1; rep from * (30, 34, 40, 46, 52) times. Sk 1. Sl st to beginning of
rnd. (32, 36, 42, 48, 54 puff st in rnd) (64, 72, 84, 96, 108 st in rnd)
Rnd (18, 18, 22, 24, 30) : Ch 1 turn. Sc (64, 72, 84, 96, 108). Sl st to first
sc of rnd. (64, 72, 84, 96, 108 sc in rnd)
Rep rnd (17, 17, 21, 23, 29) to rnd (18, 18, 22, 24, 30) (3, 4, 4, 5, 5)
times.
Row (26, 28, 32, 36, 42) decrease row: Ch 1, turn. Sc 2 tog, sc (38, 46,
50, 58, 66) sc 2 tog. (40, 48, 52, 60, 68 st in row)
Row (25, 27, 31, 35, 41) Row (27, 29, 33, 37, 43)
and row (26, 28, 32, 36, 42) and row (28, 30, 34, 38, 44)
Row (27, 29, 33, 37, 43): Ch 2 (counts as first dc), turn. Dc 1, * sk 1, puff
st, ch 1; rep from * (17, 21, 23, 27, 31) times. Dc 1 into the last 2 st. (Do
NOT sk a st between last puff st and dc). (40, 48, 52, 60, 68 st in
row)
Row (28, 30, 34, 38, 44) decrease row: Ch 1, turn. Sc 2 tog, sc (36, 44,
48, 56, 64), sc 2 tog. (38, 46, 50, 58, 66 st in row)
Row (29, 31, 35, 39, 45) Row (31, 33, 37, 41, 47)
and row (30, 32, 36, 40, 46) and row ( 32, 34, 38, 42, 48)
@LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
Row (29, 31, 35, 39, 45): Ch 2 (counts as first dc), turn. Dc 1, *sk 1,
puff st, ch 1; rep from * (16, 20, 22, 26, 30) times. Dc 1 into the last 2
st. (Do NOT sk a st between puff st and dc). (38, 46, 50, 58, 66 st in
row)
Row (30, 32, 36, 40, 46) decrease row: Ch 1, turn. Sc 2 tog, sc (34,
42, 46, 54, 62), sc 2 tog. (36, 44, 48, 56, 64 sc in row)
Row (31, 33, 37, 41, 47): Ch 2 (counts as first dc), turn. Dc 1, *sk 1, puff
st, ch 1; rep from * (15, 19, 21, 25, 29) times. Dc 1 into last 2 st. (Do
NOT sk a st between puff st and dc) (36, 44, 48, 56, 64 st in row).
Row (32, 34, 38, 42, 48) decrease row: Ch 1, turn. Sc 2 tog, sc (32,
40, 44, 52, 60), sc 2 tog. (34, 42, 46, 54, 62 st in row)
Row (0, 35, 39, 43, 49): Ch 2 (counts as first dc) turn. Dc 1, *sk 1, puff
st, ch 1; rep from * (0, 18, 20, 24, 28) times. Dc 1 into last 2 st. (Do
NOT sk a st between puff st and dc) (0, 42, 46, 54, 62 st in row).
Row (0, 36, 40, 44, 50) decrease row: Ch 1, turn. Sc 2 tog, sc (0, 38,
42, 50, 58), sc 2 tog. (0, 40, 44, 52, 60 st in row)
Row (0, 0, 0, 45, 51): Ch 2 (counts as first dc) turn. Dc 1, *sk 1, puff st,
ch 1; rep from * (0, 0, 0, 23, 27) times. Dc 1 into last 2 st. (Do NOT sk
a st between puff st and dc) (0, 0, 0, 52, 60 st in row).
@LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
Ribbing
Row 1: Ch (10, 12, 14, 16, 18), turn, yoslst into the back hump of the
second ch from hook. Yoslst in the back hump each of ch (9, 11, 13,
15, 17). Sl st into the first and second st of row (32, 36, 40, 46, 52).
Row 2: Turn, sk the 2 sl st you just made. Yoslst in the third loop only
of each st (9, 11, 13, 15, 17).
Row 3: Ch 1, turn. Yoslst in the third loop only of each st (9, 11, 13, 15,
17). Sl st into the next 2 st of row (32, 36, 40, 46, 52).
Row (35, 41, 45, 51, 59): Ch 1, turn Yoslst in the third loop only (9, 11,
13, 15, 17). Sl st into the side of row (32, 36, 40, 46, 52). Fasten off.
Cut yarn.
Row 3
@LottieandLulucrochet
Lottie and Lulu’s puff stitch jumper
@LottieandLulucrochet