User Settings

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

User settings

Enter administration mode


Press "*" + "#" to verify the administrator (initial administrator 123456) → press 1 to add a user
→ for the first time
Enter the 6-10 digit administrator password → then
In order to enter the fingerprint, magnetic card (note that the first three added users default to
the administrator password)
If you exit the system, enter the system again (first press "*" and then press # "prompt please
verify the administrator" to verify the administrator entered by pressing "#" to confirm the entry)

Change the administration password


After entering administration mode:
Press 1 to enter user settings, then press # to change the admin password;
Enter the new admin password, press # to confirm, enter the admin password again, press # to
confirm, the voice prompt will indicate successful setting.

Adding ordinary users


After entering administration mode:
Press 1 to enter user setting, press 1 again to enter add user (fingerprint, password, magnetic
card).
Enter 6-12 digits password for door opening, press # to confirm, enter the password again, press
# to confirm, voice prompts for successful setting.

Deleting user passwords


After entering management mode:
Press 2 to delete the user, enter the information of the user to be deleted, voice prompts for
successful deletion.

System settings
Time setting
"*+#" to enter the administrator → Press 5 to set the time
Follow the voice prompts to set the year, month and day respectively → Press # to confirm when
the setting is complete

Applet Unlock
Applet name "smart door lock temporary key
Open WeChat, search for the applet "smart door lock temporary key" → enter the applet → enter
the administrator password to generate the secret key to unlock the door
(Temporary authorised password, can be unlocked once) Set the system time and mobile phone
time in advance

Common problems
Restore factory settings
If you accidentally forget the management password, you can remove the
Press and hold the initialisation button for 5s while the battery is switched on, then press # to
confirm that the factory settings have been restored;

Emergency power supply method


When the battery voltage is insufficient and cannot be switched on externally, you can use a 5V
rechargeable battery as an emergency power supply by
After opening the door lock, please replace the battery immediately.

Battery replacement
Battery life
This product can hold 4 x 1.5V alkaline 5
batteries; battery life depends on user usage
The battery life depends on the user's usage habits/environment/function options etc.

Battery replacement reminder


When the system voice prompts "Battery level is too low, please replace the battery in time", you
need to replace the battery in time.

You might also like