Professional Documents
Culture Documents
39-A-ZZ-00-00-00A-066A-A Local Supply Support Equipment and Tools
39-A-ZZ-00-00-00A-066A-A Local Supply Support Equipment and Tools
39-A-ZZ-00-00-00A-066A-A Local Supply Support Equipment and Tools
Local supply support equipment and tools - Support equipment and tools data
Table of contents
References
1 Application
2 Dimensions
3 Mass
4 Maintenance and calibration
5 Part list
References
Table 1 References
Data Module Title
No References
Description
1 Application
This Data Module shows the list of the local supply tools used in all the procedures of the AW139
helicopters. Leonardo S.p.A. - Helicopters does not supply the local supply tools and the Customer must
get them from the local manufacturers. Many of the local supply tools that follow are part of the standard
equipment of a maintenance shop.
These are the local supply tools used in the procedures:
- Abrasive disk
- Adapter
- Adapter flange
- Air compressor
- Altitude simulator
- Angular probe
- Arbor press
- Autoclave
- Battery charger
- Battery charger/discharger
- Belt
- Belt saw
- Blasting machine
- Blower
- Board
- Bolt
- Bonding cable
- Boroscope
- Bottle
- Brush
- Buffer
- Bullet
ITEP - 39-A-ZZ-00-00-00A-066A-A Local supply support equipment and tools - Su... Printed on 09/06/2024
AW139 IETP 44th Issue Unmaintained Copy Page 2 of 6
ITEP - 39-A-ZZ-00-00-00A-066A-A Local supply support equipment and tools - Su... Printed on 09/06/2024
AW139 IETP 44th Issue Unmaintained Copy Page 3 of 6
- Hair dryer
- Hammer
- Handle
- Headset
- Heat gun
- Heating lamp
- Helium charging station
- Hose
- Hydraulic cylinder
- Hydraulic press
- Hydrocleaner
- Oven
- Insertion/extraction tool
- Inspection equipment
- Installation tool
- Insulation meter
- Iron wire
- Jack
- Jaw
- Key
- Keyboard
- Lamp
- Laser filter
- Laser tracker
- Leak detector
- Level
- Lever
- Lifting device
- Light source
- Magnet
- Magnifying glass
- Maintenance ladder
- Maintenance trestle
- Mandrel
- Manifold
- Marking pen
- Memory card
- Micrometer
- Milling machine
- Mirror
- Mouse
- Movable platform
- Multimeter
- Night Vision Goggle
- Nitrogen supply
- Nut
- O-ring
- Oscilloscope
- Personal locator beacon dummy
- Plastic plunger
- Plastic scraper
- Pliers
ITEP - 39-A-ZZ-00-00-00A-066A-A Local supply support equipment and tools - Su... Printed on 09/06/2024
AW139 IETP 44th Issue Unmaintained Copy Page 4 of 6
- Plug
- Power pack
- Power supply
- Power unit
- Pressure gauge
- Pressure regulator
- Protractor
- Puller
- Pump
- Quick connection tool
- Radio
- Reamer
- Receiver
- Refrigerator
- Refuel rig
- Removal tool
- Resistor
- RF power meter
- RF signal generator
- Roller
- Rope
- Routing tool
- Safety cabinet
- Safety pin
- Safety relief valve
- Sanding machine
- Saw
- Scale
- Scissors
- Screw
- Screwdriver
- Seall gun
- Sealant dispenser
- Setscrew
- Shorting plug
- Shutoff valve
- Sieves
- Sling
- Socket wrench
- Software
- Solder
- Spacer
- Spanner
- Spatula
- Sponge
- Stamp
- Strap
- Strap tie tool
- Strip
- Support stand
- Swab
- Syringe
ITEP - 39-A-ZZ-00-00-00A-066A-A Local supply support equipment and tools - Su... Printed on 09/06/2024
AW139 IETP 44th Issue Unmaintained Copy Page 5 of 6
- Temperature sensor
- Tensiometer
- Test bench
- Test coil
- Tester
- Thermometer
- Thickness measuring instrument
- Threaded rod
- Tip cap bonding tool
- Tire bead breaker
- Tire deflator
- Tire safety cage
- Torque adapter
- Torque multiplier
- Towing vehicle
- Transducer
- Transformer
- Union
- USB drive
- Vacuum bag
- Vacuum cleaner
- Vacuum device
- V-block
- Vice
- Vice clamp
- Voltage generator
- Warner simulator
- Warning placard
- Washer
- Washing machine
- Wire twister pliers
- Wooden support
- Work table
- Wrench.
Notes
1. If the Part Number or the model of the tool is specified, you can use an equivalent one if it has the same
features and meets the same requirements.
2. The settings of the computers always refer to the minimum requirements that the computer must have.
If it is necessary to specify a data of a local supply tool, this data is included in parentheses after the name
of the tool. E.g.: Lamp (5 V - 100 mA).
2 Dimensions
Not applicable.
3 Mass
Not applicable.
ITEP - 39-A-ZZ-00-00-00A-066A-A Local supply support equipment and tools - Su... Printed on 09/06/2024
AW139 IETP 44th Issue Unmaintained Copy Page 6 of 6
Not applicable.
5 Part list
Not applicable.
ITEP - 39-A-ZZ-00-00-00A-066A-A Local supply support equipment and tools - Su... Printed on 09/06/2024