Professional Documents
Culture Documents
2021 - June - Inspection Report C146
2021 - June - Inspection Report C146
2021 - June - Inspection Report C146
A. SCOPE OF INSPECTION
1. We measured the shaft alignment for male roto.
The result is ±0.02 ( OK)
Female roto
Male roto
Inlet housing is normal there are no scratch and crack on the inlet element housing, there are some rust
Inside but not effect to this housing, it is can be clean before rebuilt.
2.3. ROTOR.
Both male and female rotor is not damage, there some rust in the surface, need to be cleaned before
overhaul.
2.4. BEARINGS
Abrasion exist on all contact surface of these bearing, this is natural abrasion after a long time running
with heavy load.
Base on real condition & manufacture standard maintenance scope, it is the right time to overhaul the
element.
---o0o---