Professional Documents
Culture Documents
L220H - Bleeding Air
L220H - Bleeding Air
L220H - Bleeding Air
Bleeding air
Op nbr
Figure 1
Figure 2
1. Test button
5. Turn off the ignition when clean grease has been pressed out from the nipple.
Figure 3
1. Grease
6. Turn the start key to ignition position and press in the test button again for at least 6 seconds. Now grease will be
pressed out from the other port on the pump unit.
7. Turn off the ignition when clean grease has been pressed out from the port.
9. Remove one of the plugs from the distribution block that is located farthest away in the system.
Figure 4
1. Distribution block
11. Press in the test button on the pump unit for at least 6 seconds. Now grease will be pressed out from the port.
12. Turn off the ignition when clean grease has been pressed out from the nipple.
Figure 5
1. Grease
13. Turn the start key to ignition position and press in the test button again for at least 6 seconds. Now grease will be
pressed out from the other port on the pump unit.
Turn off the ignition when clean grease has been pressed out from the nipple.