Professional Documents
Culture Documents
Els Data Sheets
Els Data Sheets
Els Data Sheets
ES10 (Flexible Sign) is made of printed graphics between layers of 10% Ammonia Gasoline
chemical resistant plastic. The uppermost layer consists of a semi-rigid, UV-
10% HCL Grease and Oils
resistant film, augmented with an additional protective liner to ensure
abrasion protection, which is intended to be removed after installation. The 10% NaOH Heptane
substrate is a white gloss PVC film that exhibits contouring capabilities on 50% NaOH Hydraulic Fluid
both curved and flat surfaces when mounted. 10% Sodium Hydroxide IPA (Isopropanol)
5% Alconox® Detergent PH 4
Total Thickness: 0.50 mm thick including the adhesive backing
409® Degreaser PH10
Overlaminate Material: 250 micron (0.25 mm) thick Polyethylene
5% Acetic Acid Propylene Glycol
Terephthalate (PET) clear film with protective layer to remove after installation.
10% Salt Water Solution Rust Veto® 377
Substrate/base Material: 100 micron (0.10 mm) white gloss PVC film.
50% Salt Water Solution SAE 20 Oil
Liner: Coated Kraft liner 120 gsqm.
Alkalis Speedi Kut Cutting Oil 332
Surface Finish: Matte finish
BIOACT® EC-7R Terpene
Mounting: Permanent clear acrylic adhesive. Cleaner Super Agitene®
NaOCl (Bleach/Chlorine)
Water and Oil resistance: Excellent Toluene
Ammonia solution
Service Temperature: -40°C to 90°C Turpentine
Deionized Water
Warranty: 10 years
Water
Detergent
Life Expectancy: 20 years
Water +2% neutral soap
Abrasion Resistance: Excellent Diesel Fuel
NOTE: Prior to installation, the surface should preferably be cleaned from dust, grease, or any
contaminants to ensure 100% adhesion of the material. Painted surfaces must be completely cured.
ES10G
(Flexible, Photo luminous sign)
Engineered Labelling Solutions
www.elabellingsolutions.com
ES10G (Flexible, Photo luminous sign) is made of printed graphics between 10% Ammonia Gasoline
layers of chemical-resistant plastic. The uppermost layer consists of a semi-
10% HCL Grease and Oils
rigid, UV-resistant film, augmented with an additional protective liner to ensure
abrasion protection, which is intended to be removed after installation. The 10% NaOH Heptane
substrate is a photo-luminous PVC film that exhibits contouring capabilities 50% NaOH Hydraulic Fluid
on both curved and flat surfaces when mounted. 10% Sodium Hydroxide IPA (Isopropanol)
NaOCl (Bleach/Chlorine)
Mounting: Permanent clear acrylic adhesive. Toluene
Ammonia solution
Water and Oil resistance: Excellent Turpentine
Deionized Water
Service Temperature: -40°C to 90°C
Water
Detergent
Warranty: 10 years
Water +2% neutral soap
Life expectancy: 20 years Diesel Fuel
Flammability: Self-extinguishing
NOTE: Prior to installation, the surface should preferably be cleaned from dust, grease, or any
contaminants to ensure 100% adhesion of the material. Painted surfaces must be completely cured.
ES10G
(Low Level Lighting)
Engineered Labelling Solutions
www.elabellingsolutions.com
ES10G (Low Level Lighting) is made of printed graphics between layers of 10% Ammonia Detergent
chemical-resistant plastic. The substrate is a photo-luminous PVC film that
exhibits contouring capabilities on both curved and flat surfaces when 10% HCL Diesel Fuel
Substrate/base Material: 260 micron (0.26 mm) photo luminous PVC film. 5% Acetic Acid Hydraulic Fluid
NOTE: Prior to installation, the surface should preferably be cleaned from dust, grease, or any
contaminants to ensure 100% adhesion of the material. Painted surfaces must be completely cured.
ES10R (Rigid sign) is made of printed graphics between layers of chemical- 10% Ammonia Gasoline
resistant plastic. The top layer is a semi-rigid UV-resistant film with additional
10% HCL Grease and Oils
protective liner to ensure abrasion protection. The substrate is a white gloss
PVC film machine pressed to aluminum composite backing plate. 10% NaOH Heptane
NaOCl (Bleach/Chlorine)
Service Temperature: -40°C to 90°C Toluene
Ammonia solution
Warranty: 10 years Turpentine
Deionized Water
Life expectancy: 20 years
Water
Detergent
Abrasion Resistance: Excellent
Water +2% neutral soap
Flammability: Self-extinguishing Diesel Fuel
NOTE: Prior to installation, the surface should preferably be cleaned from dust, grease, or any
contaminants to ensure 100% adhesion of the material. Painted surfaces must be completely cured.
ES10RG
(Rigid Photo luminous sign)
Engineered Labelling Solutions
www.elabellingsolutions.com
ES10RG (Rigid Photo luminous sign) is made of printed graphics between 10% Ammonia Gasoline
layers of chemical-resistant plastic. The top layer is a semi-rigid UV-resistant
10% HCL Grease and Oils
film with additional protective liner to ensure abrasion protection. The substrate
or base material is a photo luminous PVC film. Machine pressed to the 10% NaOH Heptane
Physical Characteristics
50% Sodium Hydroxide Kerosene
Total Thickness: 3.80 mm thick including the adhesive backing 20% Sodium Carbonate Organic Solvents
Overlaminate Material: 250 micron (0.25 mm) thick Polyethylene 5% Alconox® Detergent PH 4
Terephthalate (PET) clear film with protective layer to remove after installation. 409® Degreaser PH10
Substrate/base Material : 260 micron (0.26 mm) photo luminous PVC film. 5% Acetic Acid Propylene Glycol
IMO compliant luminosity 10% Salt Water Solution Rust Veto® 377
Luminance after 10 min: 40 mcd/m 2 50% Salt Water Solution SAE 20 Oil
Luminance after 60 min: 4 mcd/m 2 Alkalis Speedi Kut Cutting Oil 332
NOTE: Prior to installation, the surface should preferably be cleaned from dust, grease, or any
contaminants to ensure 100% adhesion of the material. Painted surfaces must be completely cured.
ES10RFX
(Reflective sign)
Engineered Labelling Solutions
www.elabellingsolutions.com
ES10RFX (Reflective sign) is made of printed graphics between layers of 10% Ammonia Gasoline
chemical-resistant plastic. The overlaminate film provides protection against
10% HCL Grease and Oils
the harshest environments. It also provides superior protection against UV
exposure to avoid fading effects. The text and graphics are digitally printed 10% NaOH Heptane
using the latest ink technology in the marketplace. The substrate or base 50% NaOH Hydraulic Fluid
material is a Reflectorize film. Machine pressed to the aluminum composite 10% Sodium Hydroxide IPA (Isopropanol)
backing plate.
50% Sodium Hydroxide Kerosene
5% Alconox® Detergent PH 4
Total Thickness: 3.80 mm thick including the adhesive backing 409® Degreaser PH10
Overlaminate Material: 80 microns (0. 0.08 mm) thick UV protective film. 5% Acetic Acid Propylene Glycol
Substrate/base Material : 260 micron (0.26 mm) reflectorize film
10% Salt Water Solution Rust Veto® 377
Surface finish: Semi-gloss finish
50% Salt Water Solution SAE 20 Oil
Rigid backing plate: 3mm thick Aluminum composite.
Alkalis Speedi Kut Cutting Oil 332
Water and Oil resistance: Excellent BIOACT® EC-7R Terpene
Cleaner Super Agitene®
Service Temperature: -40°C to 90°C
NaOCl (Bleach/Chlorine)
Toluene
Warranty: 10 years
Ammonia solution
Life expectancy: 20 years Turpentine
Deionized Water
Abrasion Resistance: Excellent Water
Detergent
Flammability: Self-extinguishing
Diesel Fuel Water +2% neutral soap
ES5V is made of printed graphics between layers of chemical resistant 10% Ammonia Gasoline
plastic. The over laminate provides protection against UV exposure to avoid
10% HCL Grease and Oils
fading effects. The substrate is a white gloss PVC film that exhibits
contouring capabilities on both semi curved and flat surfaces when mounted. 10% NaOH Heptane
NaOCl (Bleach/Chlorine)
Warranty: 5 years (Indoor/outdoor) Toluene
Ammonia solution
Abrasion Resistance: Excellent Turpentine
Deionized Water
Flammability: Self-extinguishing
Water
Detergent
RIDER (Mounted Pipe Label) is made of printed graphics between layers of 10% Ammonia Gasoline
chemical-resistant plastic. The top layer is a UV-resistant film with additional
10% HCL Grease and Oils
protective liner to ensure abrasion protection. The substrate is a white gloss
PVC film machine pressed to an aluminum composite backing plate. For 10% NaOH Heptane
mounting, HC-4 saddle cable tie holder is added to secure pipe label position. 50% NaOH Hydraulic Fluid
NaOCl (Bleach/Chlorine)
Warranty: 10 years Toluene
Ammonia solution
Life expectancy: 20 years Turpentine
Deionized Water
Abrasion Resistance: Excellent
Water
Detergent
Flammability: Self-extinguishing
Diesel Fuel Water +2% neutral soap
ET10 (Rigid Tags) is made of printed graphics between layers of chemical- 10% Ammonia Gasoline
resistant plastic. The top layer is a UV-resistant film. The substrate is a white
10% HCL Grease and Oils
gloss PVC film machine pressed to an aluminium composite backing.
10% NaOH Heptane
NaOCl (Bleach/Chlorine)
Warranty: 10 years Toluene
Ammonia solution
Life expectancy: 20 years Turpentine
Deionized Water
Abrasion Resistance: Excellent
Water
Detergent
Flammability: Self-extinguishing
Diesel Fuel Water +2% neutral soap
Description
Chemical Resistant
Chemical Resistant
Pipe Label (EL10) is constructed with a substrate biaxial-oriented PET
film (100% eco-friendly) and a layer of over-laminate film and is formed 10% Ammonia Gasoline
together during the stringent manufacturing process. The overlaminate
10% HCL Grease and Oils
film provides protection against the harshest environments encountered
10% NaOH Heptane
in complex process facilities and offshore. It also provides superior
protection against UV exposure to avoid fading effects. The text and 50% NaOH Hydraulic Fluid
graphics are digitally printed using the latest ink technology in the 10% Sodium Hydroxide IPA (Isopropanol)
marketplace. Materials are self-extinguishing when exposed to open
50% Sodium Hydroxide Kerosene
flames and provide excellent resistance to chemicals and liquid forms of
10% Sulfuric Acid Methanol
substances. The label as a whole is chloride and halide-free.
30% Sulfuric Acid Mineral Spirits
The label is applied by wrapping completely around the circumference of 20% Sodium Carbonate Organic Solvents
the pipe (coiled, self-securing type). The wraparound markers seal to 5% Alconox® Detergent PH 4
themselves with an adhesive sealing strip. There is no direct surface
409® Degreaser PH10
contact between the adhesive and the pipe itself.
5% Acetic Acid Propylene Glycol
NaOCl (Bleach/Chlorine)
Base Material: 125 micron (0.125 mm) Polyester film Toluene
Ammonia solution
Laminate Material: 80 microns (0.080 mm) thick UV protective film Turpentine
Deionized Water
Mounting: Adhesive strip on one end that does not adhere to the pipe
Water
Detergent
surface. 80 micron (0.080 mm)
Diesel Fuel Water +2% neutral soap
Finish: UV-resistant glossy finish
Service Temperature: -40°C to 190°C Engine Oil (10W30) Water distilled
Description
Physical Characteristics