Professional Documents
Culture Documents
B703C MFP FullJet Nozzles
B703C MFP FullJet Nozzles
REDUCE COSTLY
CLOGGING PROBLEMS
WITH MFP FULLJET ® NOZZLES
150
150
Our MFP FullJet® nozzles eliminate coverage
100
problems associated with other large free passage 100
true full cone pattern with consistent coverage Number of collection tubes filled
throughout the entire spray to ensure better cleaning,
cooling, quenching, dust suppression and more. Competitor A Large Free Passage Nozzle
Side-by-side testing shows the performance 200
200
differences between our MFP FullJet nozzles 180
180
160
and competitive nozzles. Nozzles tested are of 160
140
140
identical size, capacity and spray angle (90°) and 120
120
Volume
A BROAD RANGE OF
CAPACITIES, CONNECTIONS AND
SPRAY ANGLES ENSURES YOU’LL 1/8" – 1/4" male inlet
FIND THE PERFORMANCE YOU NEED connection, brass, 303 stainless
steel or 316 stainless steel
NEW 1/8" AND 1/4" SIZES MFP FULLJET ® NOZZLES ARE IDEAL FOR:
FOR LOW FLOW OPERATIONS • Applications plagued by clogging problems
• 1/8" and 1/4" threaded male connections. Choice of • Washdown of mist eliminator blades, filter
brass, 303 stainless steel or 316 stainless steel. pads and distribution plates
Vane material same as body material • Washing coal, sand and other minerals
Plus: • Process cooling
• 3/8" to 1" threaded male and female connections • Gas cooling and flue gas desulfurization
with 316 stainless steel vane and choice of brass • Blanching machines
or 316 stainless steel bodies • Dust suppression
• 1-1/4" to 3" threaded male and female • Fire protection of off-shore platforms, storage
connections in 316 stainless steel tanks and hazardous loading areas
• Spray angles: 60°, 90° or 115° • Flooding/deluge fire protection systems
• Flow rates up to 705 gpm (2670 lpm) • Foam control
• Operating pressures up to 80 psi (6 bar) • Aerating waste water
ORDERING INFORMATION
MAXIMUM FREE PASSAGE (MFP) FULLJET NOZZLE
Example
Inlet Nozzle Material Spray Capacity
Conn. Type – Code Angle Size 3/4 HHMFP – SS 90 70
BSPT connections require the addition of a “B” prior to the inlet connection. No material code required for brass. Use SS as material code for 316 stainless steel MFP nozzles.
PERFORMANCE DATA
HMFP (F) FULLJET – 3/8", 1/2", 3/4", 1", 1-1/4" AND 1-1/2" SIZES
Inlet Conn. L Hex. Net Weight
Spray Angle Capacity Size
(in.) in. (mm) in. oz. (kg)
60°, 90°, 115° 14, 22 1.460 (37.1) 13/16 2.4 (0.07)
3/8
60°, 90°, 115° 32 1.701 (43.2) 13/16 2.5 (0.07)
60°, 90°, 115° 32 1.770 (45.0) 1 4.5 (0.13)
1/2
L 60°, 90°, 115° 51, 57 2.120 (53.9) 1 4.6 (0.13)
60°, 90°, 115° 70 2.400 (61.0) 1-1/4 8.9 (0.25)
3/4 60°, 90°, 115° 84 2.637 (67.0) 1-3/8 12.6 (0.36)
60°, 90°, 115° 100, 120 3.070 (78.0) 1-3/8 13.3 (0.38)
1 60°, 90°, 115° 120, 150, 170 3.250 (82.6) 1-3/4 22.5 (0.64)
1-1/4 60°, 90°, 115° 170, 200, 220, 240, 260 3.750 (95.3) 2 30.5 (0.86)
1-1/2 60°, 90°, 115° 240, 260, 280, 300, 350, 400, 450 4.380 (111.3) 2-3/16 35.3 (1.0)
HHMFP (M) FULLJET – 3/8", 1/2", 3/4", 1", 1-1/4" AND 1-1/2" SIZES
Inlet Conn. L Hex. Net Weight
Spray Angle Capacity Size
(in.) in. (mm) in. oz. (kg)
60°, 90°, 115° 14, 22 1.000 (25.4) 11/16 1.4 (0.04)
3/8
60°, 90°, 115° 32 1.701 (43.2) 3/4 2 (0.06)
60°, 90°, 115° 32 1.225 (31.1) 7/8 2.4 (0.07)
1/2
L 60°, 90°, 115° 51, 57 2.198 (55.8) 1 4.9 (0.14)
60°, 90°, 115° 70 1.810 (46.0) 1-1/8 5 (0.14)
3/4 60°, 90°, 115° 84 2.713 (68.9) 1-3/8 11.5 (0.33)
60°, 90°, 115° 100, 120 3.100 (78.7) 1-3/8 12.1 (0.34)
1 60°, 90°, 115° 120, 150, 170 3.250 (82.6) 1-3/4 22.5 (0.64)
1-1/4 60°, 90°, 115° 170, 200, 220, 240, 260 3.750 (95.3) 2 32 (0.91)
1-1/2 60°, 90°, 115° 240, 260, 280, 300, 350, 400, 450 4.380 (111.3) 2-3/16 36.7 (1.04)
North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 USA
Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000
Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842
www.spray.com
Bulletin No. 703C Printed in the U.S.A. ©Spraying Systems Co. 2017