Professional Documents
Culture Documents
Technical Specifications
Technical Specifications
C11
cable and plug (schuko type 220vac, 16a) must comply with the provisions of rm no. 175-2008-mem
C04
Cable and plug (schuko type 220vac, 16a) must comply with the provisions of rm no. 175-2008-mem
E04 plastic bottle with a capacity of 1 liter. or larger, autoclavable, with measurement scale and overflow or overflow
safety device.
E05 accessories: with one (01) replacement bottle with the same characteristics, ten (10) adult suction cannulas, ten
(10) pediatric suction cannulas, twenty (20) hydrophobic or bactericidal filters.
E06 power requirement 220vac, 60hz
F FIBER OPTICAL LARYNGOSCOPE
F01 with three sheets of different sizes for adult patients, Macintosh type, reusable fiber optic (sizes 1, 2 and 3).
F02 with one (01) reusable fiber optic Macintosh type pediatric patient sheet (size 1).
F03 with two blades of different sizes for Miller-type pediatric patients, reusable fiber optics (sizes 1 and 2).
F04 With type C handle for standard rechargeable battery for fiber optic laryngoscope, includes battery.
F05 LED lighting white light, color temperature 5000°ko higher, life time 20,000 hours or higher
F06 rigid or semi-rigid case that ensures the integrity of the blades and handles of the equipment
g OXYGEN CYLINDER WITH PRESSURE REGULATOR
G01 aluminum balloon, type e, with valve type cga-870 (index pin)
G02 pressure regulator with manometer (up to 15 lpm or greater)
h DEFIBRILLATOR WITH MONITOR
H01 laptop total weight less than or equal to 8 kg.
H02 for cardiac defibrillation and integrated continuous monitoring.
H03 LCD, TFT screen with a minimum diagonal of 7 inches.
H04 user interface in Spanish language.
H05 ECG wave graph and measured value on screen.
H06 display of the numerical value of the selected and released energy.
H07 Capable of audible and visual alarms with user-adjustable limits.
H08 Battery status indicator.
H09 biphasic wave.
H10 Charging time to 200 joule biphasic power in less than or equal to 7 seconds.
H11 defibrillation capability in manual and automatic mono.
H12 Non-invasive pacemaker with selection of frequency and stimulation current integrated into the device.
H13 pacemaker 30 to 180 steps or wider range
H14 thermal arrangement recorder integrated into the equipment.
H15 cable and plug (schuko type 220vac, 16a) must comply with the provisions of rm no. 175-2008-mem
H16 two (02) ECG trunk cables, two (02) sets of branch lines of (03) hoses.
H17 one (01) set of adult/pediatric paddles that can be slid or mounted on the adult paddles.
H18 three (03) pairs of adult disposable electrodes for pacemaker and hands-free defibrillation with cable to the equipment.
H19 one (01) liter of ecg gel.
H20 five (05) rolls of thermosensitive paper.
H21 one hundred (100) disposable clip-type ECG electrodes.
Yo GUEDEL TYPE CANNULAS
I01 cannulas identified by color in sizes 1, 2, 3, 4, 5
J. ACCESSORIES
J01 four (04) oropharynx tubes of different sizes, two for adult patients and two for pediatric patients.
J02 two (02) nasopharynx tubes of different sizes, one (01) for adult patients and one (01) for pediatric patients.
J03
six (06) endotracheal tubes of different sizes with guide, three (03) for adult patients and three (03) for pediatric patients.
J04 a magill type clamp.
CODE:
EQUIPMENT NAME: ADULT STETHOSCOPE
D-124
FUNCTIONAL UNIT (SERVICE): VARIOUS
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL SPECIFICATIONS
A01 for use in adult patients
A02 Stethoscope head made of aluminum or stainless steel.
A03 with two receptacles: one flat for the diaphragm and the
A04 other bell-shaped.
Flat-shaped receptacle and bell-shaped receptacle should have a rubber-coated edge.
A05 bell-shaped receptacle, it will have a rubber-covered edge.
A06 Chrome-plated or stainless steel olive support arch with built-in or external tensile-resistant strap.
A07 The tube that connects the head of the stethoscope to the headphones will be flexible and resistant to
A08 traction without latex.soft eartips that completely adapt to the ear canal.
with interchangeable
b ACCESSORIES
B01 two pairs of soft eartips
B02 two (02) additional planes for diaphragm
B03 one (01) case to store the stethoscope
CODE: EQUIPMENT NAME: ADULT - PEDIATRIC
D-125 STETHOSCOPE
FUNCTIONAL UNIT (SERVICE): VARIOUS
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL SPECIFICATIONS
A01 Stethoscope head constructed of aluminum or stainless steel
A02 with two receptacles: one flat for diaphragm and the other
A03 bell-shaped
The flat-shaped receptacle and the bell-shaped receptacle
A04 should
The tubehave
thata connects
rubber-coated edge.
the head of the stethoscope to the headphones made of durable PVC.
A05 ability to detect low frequency sounds in the range of approximately 20 to 100 Hz
A06 ability to detect high frequency sounds in the range of approximately 100 to 1000 Hz
b ACCESSORIES
B01 two pairs of soft eartips
B02 two (02) additional planes for diaphragm
B03 one (01) case to store the stethoscope
CODE:
EQUIPMENT NAME: FRONTOLUZ
D-126
FUNCTIONAL UNIT (SERVICE): VARIOUS
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL SPECIFICATIONS
A01 Comfortable and balanced front strap with battery
A02 compartment, easy
on/off switch and to clean
charger and integrated
connector charging
integrated in the battery
A03 compartment.
Focusable LED lamp, which at an area of 40cm provides an
A04 illuminated
battery area ofapprox.
operation: approximately 40mm
30 hours. withto 200mm
lithium in
batteries, approx. 90 minutes. with alkaline batteries type AAA.
A05 battery operation: approx. 90 minutes. with fully charged batteries.
CODE:
EQUIPMENT NAME: REFLEX HAMMER
D-129
FUNCTIONAL UNIT (SERVICE): VARIOUS
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL SPECIFICATIONS
A01 hammer with rubber percussion head
A02 Handle made of stainless steel.
A03 Approximate dimensions: 180 mm. long
b COMPONENTS
B01 with protective bag
CODE:
EQUIPMENT NAME: PANTOSCOPE
D-131
MINIMUM TECHNICAL REQUIREMENT
TO GENERAL CHARACTERISTICS
auxiliary equipment for examination of eyes, ear and
A01
pharynx/larynx
OF THE OPHTHALMOSCOPE
A02 diaphragm wheel
A03 vertical linear diaphragm, small and large circular diaphragm
A04 with protection system against dust and humidity.
A05 with filter for red-free lighting (green filter).
A06 with led bulbs
A07 with observation optics: with lenses from - 10 to + 40 diopters or more
A08 with handle for type c batteries
A09 With FO nasal speculum
OF THE OTOSCOPE
A10 Composed of a built-in glass magnifying glass.
A11 four (04) reusable specula of different sizes
A12 with capacity for pneumatic otoscopy (Includes pear)
A13 with white LED light lighting
A14 with handle for type c batteries
OF THE LARYNGOSCOPE
A15 FO tongue depressor support
A16 FO lamp holder
A17 two (02) laryngeal mirrors of approximately 020 and 022 mm diameter
b ACCESSORIES
B01 one (01) case for equipment and accessories
B02 one (01) handle with charger (integrated in the handle)
B03 one (01) battery
CODE: EQUIPMENT NAME: PEDIATRIC
D-132 PANTOSCOPE
MINIMUM TECHNICAL REQUIREMENT
TO GENERAL CHARACTERISTICS
auxiliary equipment for examination of eyes, ear and
A01
pharynx/larynx
OF THE OPHTHALMOSCOPE
A02 diaphragm wheel
A03 vertical linear diaphragm, small and large circular diaphragm
A04 with protection system against dust and humidity.
A05 with filter for red-free lighting (green filter).
A06 with led bulbs
A07 with observation optics: with lenses from - 10 to + 40 diopters or more
A08 with handle for type c batteries
A09 With FO nasal speculum
OF THE OTOSCOPE
A10 Composed of a built-in glass magnifying glass.
A11 four (04) reusable specula of different sizes
A12 with capacity for pneumatic otoscopy (Includes pear)
A13 with white LED light lighting
A14 with handle for type c batteries
OF THE LARYNGOSCOPE
A15 FO tongue depressor support
A16 FO lamp holder
A17 two (02) laryngeal mirrors of approximately 020 and 022 mm diameter
b ACCESSORIES
B01 one (01) case for equipment and accessories
B02 one (01) handle with charger (integrated in the handle)
B03 one (01) battery
CODE:
EQUIPMENT NAME: BUNSEN BURNER
D-155
FUNCTIONAL UNIT (SERVICE): LABORATORY
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL SPECIFICATIONS
A01 nickel plated burner
A02 stable base
A03 inlet for gas connection
A04 air regulator
A05 flame stabilizer
b ACCESSORIES
B01 with regulator and hose for connection to the gas cylinder or gas network.
B02 one (01) gas bottle (with contents)
CODE: NAME OF THE EQUIPMENT:
D-156 CHRONOMETER CLOCK FOR LABORATORY
FUNCTIONAL UNIT (SERVICE): LABORATORY
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL SPECIFICATIONS
A01 with solid state electronics.
A02 abs plastic cover.
A03 digital display.
A04 controls: start, stop and reset.
A05 integrated clock.
A06 Accuracy: +/- 0.01 minute approximately.
A07 reading: from zero to 999.99 minutes
approximately.
CODE:
DIGITAL THERMOMETER/HYGROMETER
D-158
CODE:
EQUIPMENT NAME: MAT 200X80CM
D-159
FUNCTIONAL UNIT (SERVICE):
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL SPECIFICATIONS
CODE:
D-17 EQUIPMENT NAME: PULSE OXIMETER
FUNCTIONAL UNIT (SERVICE): CRITICAL AREAS
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL CHARACTERISTICS
A01 Desktop
A02 mains and battery operation
A03 plethymographic waveform display.
A04 LCD screen.
A05 technology to ensure measurement and accuracy during patient movements and low perfusion.
MEASUREMENT PARAMETERS
A06 arterial oxygen saturation (spo2): 50% or less to 99%.
A07 Beat rate (bpm): 40 bpm or less to 240 bpm or more
AUDIOVISUAL ALARMS
A08 spo2, high and low level
A09 bpm, high and low level
A10 battery indicator
A11 alarm silencer
b ACCESSORIES
B01 two (02) reusable finger sensors for adult patients.
B02 two (02) reusable finger sensor for pediatric patient.
B03 two (02) reusable sensors for neonatal patients.
B04 one (01) extender cable
c ENERGY REQUIREMENT
C01 220 ac/60hz with ground wire
C02 cable and plug (schuko type 220vac, 16a) must comply with the provisions of rm no. 175-2008-mem
C03 Rechargeable battery with minimum autonomy of (02) hours.
CODE:
EQUIPMENT NAME: PERFUSION BAG
D-193
FUNCTIONAL UNIT (SERVICE): VARIOUS
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL SPECIFICATIONS
A01 pressure infusion bag
A02 capacity of 1000 cc or more.
A03 individual packaging
A04 guarantees the airtightness and integrity of the product.
A05 resistant to handling and storage
b MATERIAL
B01 plastic, polyurethane acrylic, polyvinyl chloride or medical grade polyester for clinical hospital use.
c CHARACTERISTICS
C01 opening and closing system that offers security and ease of use.
C02 not disposable.
C03 with inflation bulb with pressure gauge and pressure regulation system.
CODE:
SUCTION UNIT FOR VACUUM NETWORK
D-202
SPECIFICATIONS TECHNIQUES
DEFINITION OF EQUIPMENT
REQUIREMENTS TECHNICAL MINIMA
TO GENERAL
A01 WITH TERMINAL FEMALE FOR CONNECT TO THE EXIT GUY
A02 DISS OF
CASE THE GRID OF EMPTY
MANUFACTURED OF THE ESTABLISHMENT.
OF MATERIAL PLASTIC RESISTANT
A03 ABS, RESIN OR OTHERS POLYMERS OF HIGHWITH
TRAP OF WATER IN PSU EITHER SUPERIOR DENSITY.
FILTERS PARTICLES OF HIGH EFFICIENCY
A04 VACUUMOMETER GRADUATE IN mmHG.
A05 COMMAND OF REGULATION MANUAL COUNTERCLOCK
A06 SWITCH OF SWITCHED ON AND OFF
b REGULATOR OF SUCTION
B01 RANGE OF SUCTION: 0 TO 200 mmHg either ELDERLY
B02 FLOW ADJUSTABLE OF UNTIL 100 LPM
B03 WITH TRAP OF SECURITY ANTIREBALSE, CONNECTED TO THE EXIT OF THE REGULATOR
c ACCESSORIES
C01 TWO (02) JARS OF HARVEST OF SECRETIONS OF GLASS EITHER POLYMER TRANSPARENT OF A LITER either FURTHER WITH TOP OF CLOSING AIRTIGHT AND SYSTEM OF SECURITY ANTIREFLOW
C02 TWO (02) TUBE FLEXIBLE OF CONNECTION OF THE REGULATOR TO THE JAR OF 2 m. OF LENGTH.
C03 TWO (02) TUBE FLEXIBLE OF SUCTION, 3 m. OF LENGTH.
NOTE: INSTALL MEDIUM OF JAR OF ASPIRATION TO A HEIGHT APPROX: BETWEEN140CM TO 150CM. COORDINATED TO
THE MOMENT OF THE EXECUTION OF THE CONSTRUCTION SITE.
CODE:
PEDIATRIC ADULT RESUSCITATION CASE
D-204
A01 SET OF DEVICES USED TO VENTILATE AND OXYGENATE
A02 PORTABLE BRIEFCASE WITH COMPARTMENTS
A03 SECRETION SUCTION UNIT (PEDAL AND/OR PNEUMATIC
ADULT MANUAL RESUSCITATOR
A04 SILICONE BAG, STERILIZABLE IN AUTOCLAVE AND WITH
A05 TWO (02) MASKS FOR ADULT PATIENTS OF DIFFERENT
PATIENT VALVE, PEEP VALVE AND OVER PRESSURE
A06
SAFETY VALVE (RELIEF), AUTOCLAVE STERILIZABLE.
A07 OXYGEN ACCUMULATOR
PEDIATRIC MANUAL RESUSCITATOR
A08 SILICONE BAG, STERILIZABLE IN AUTOCLAVE AND WITH CAPACITY GREATER THAN 450 ML AND LESS THAN
1000ML.
A09 TWO (02) MASKS FOR PEDIATRIC PATIENTS OF DIFFERENT SIZES WITH PADDED EDGES,
A10 PATIENT VALVE, PEEP VALVE AND OVER PRESSURE SAFETY VALVE (RELIEF), AUTOCLAVE
A10 OXYGEN ACCUMULATOR
FIBER OPTICAL LARYNGOSCOPE LED LIGHTING
A11 WITH TWO BLADES OF DIFFERENT SIZES FOR ADULT PATIENTS MACINTOSH TYPE, REUSABLE FIBER
A12
WITH A MILLER TYPE (STRAIGHT), REUSABLE FIBER OPTIC BLADE FOR PEDIATRIC PATIENTS (SIZE 1).
A13 WITH TWO BLADES OF DIFFERENT SIZES FOR MILLER TYPE PEDIATRIC PATIENTS, REUSABLE FIBER
CODE:
EQUIPMENT NAME: ELECTRIC GAS CUTTER
D-216
FUNCTIONAL UNIT (SERVICE): VARIOUS
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL SPECIFICATIONS
A01 on table
A02 Blade diameter between 4 to 6 inches.
A03 with handle or grip device
E01 light weight (less than 10 kg)
b COMPONENTS
B01 steel circular blade
B02 Built-in blade sharpener.
c ACCESSORIES
C01 a set of replacement circular blades (03 units)
d ENERGY REQUIREMENT
D01 220VAC or 230VAC / 60Hz
D02 cable and plug (schuko type 220vac, 16a) must comply with
the provisions of rm no. 175-2008-mem
A10
CYCLE: DISCHARGE OF SOLID WASTE TO THE DRAIN, PREWASHING, WASHING AND DISINFECTION AT A MINIMUM.
A11 WITH PREDETERMINED PROGRAMS WITH OPTION TO REPROGRAMMING BY THE USER.
INDICATORS
A12 OF THE PHASES OF THE CYCLE.
A13 CHAMBER TEMPERATURE.
A14 CAMERA DEVELOPMENT
A15 COOLING OF THE WEDGE OR URINARY BOTTLES.
b COMPONENTS
B01 WATER CIRCULATION PUMP.
B02 LIQUID DETERGENT DOSING PUMP
B03 INTEGRATED ELECTRIC HOT WATER GENERATOR.
B04 DRAIN WITH CONNECTION TO WALL OR FLOOR (TYPE P TRAP).
c ENERGY REQUIREMENT
C01
CABLE AND PLUG (SCHUKO TYPE 220VAC, 16A) MUST COMPLY WITH THE PROVISIONS OF RM N° 175-2008-MEM.
CODE:
EQUIPMENT NAME: CELL COUNTER
D-235
MINIMUM TECHNICAL REQUIREMENT
TO GENERAL CHARACTERISTICS
A01 digital counter with at least 8 buttons or channels
A02 8 with cell names or more
A03 automatic percentage calculation
A04 with audible alarm indicating total count
A05 with digital display
A06 with function keys for normal counting, percentages, and zero
b or reset at
ENERGY a minimum
REQUIREMENT
B01 220 VAC / 60 Hz
CODE: EQUIPMENT NAME: SEMI-AUTOMATIC
D-245 BIOCHEMICAL ANALYZER
MINIMUM TECHNICAL REQUIREMENT
TO CHARACTERISTICS
A01 photometric range: -0.1 to 2.3 absorbance or greater range
A02 detector: photo diode (320-1100nm) or better
A03 light source: quartz halogen lamp 12v 20w or higher
A04 6 filters at least (340, 405, 505, 546, 578 and 620nm)
A05 white: with automatic adjustment to zero
A06 Membrane keyboard for entering alphanumeric data
A07 graphic lcd screen
A08 Spanish language system
A09 multiple tests: nine average repetitions, sd and cv.
A10 Delay time: programmable from 0 to 999 sec.
A11 calibration: one point, two point and multipoint factor
A12 metal flow cell, with quartz window, 30ul volume
A13 Temperature control by means of a Peltier element, sets the temperature at 25°c or 37°c
A14 with integrated dot matrix printer
A15 with external printer port
b QA:
B01 two controls per test
B02 quality control of the last 30 measurements at least
B03 leley jenning curves
B04 high/low ranges
c MEASUREMENTS PROCEDURE:
C01 kinetic with linearity check
C02 kinetic with linearity check and blank sample
C03 two kinetic points, with or without reagent blank
C04 endpoint, with or without reagent blank
C05 dichromatic end point, with or without reactive white
C06 end point, with sample blank and with or without reagent blank
d SUCTION SYSTEM
D01 internal bellows type pump, driven by stepper motor
D02 waste connection on rear panel
D03 programmable suction volume
AND MINIMUM PORTS
E01 Centronics or Superior type parallel port (link between computer and peripheral)
E02 serial port type rs232 or higher (same function)
E03 PS2 type port for external keyboard or higher (same function)
c ENERGY REQUIREMENT
C02 cable and plug (schuko type 220vac, 16a) must comply with the provisions of rm no. 175-2008-mem.
SPEED READING.
A07 WITH REMOVABLE NON-SLIP PLATFORM WITH SPRING TO HOLD BOTTLES. PLATFORM WITH CAPACITY FOR ONE BOTTLE OF
A07 With safety latch and internal automatic engine shutdown switch when the lid is opened during operation.
A04 material of the internal and external walls in hard plastic with polyurethane and polyethylene insulation
A08 SILICONE BAG, STERILIZABLE IN AUTOCLAVE AND WITH CAPACITY GREATER THAN 450 ML AND LESS THAN
1000ML.
A09 TWO (02) MASKS FOR PEDIATRIC PATIENTS OF DIFFERENT SIZES WITH PADDED EDGES, ANATOMICAL, TRANSPARENT,
A10 PATIENT VALVE, PEEP VALVE AND OVER PRESSURE SAFETY VALVE (RELIEF), AUTOCLAVE STERILIZABLE.
A10 OXYGEN ACCUMULATOR
FIBER OPTICAL LARYNGOSCOPE LED LIGHTING
A11 WITH TWO BLADES OF DIFFERENT SIZES FOR ADULT PATIENTS MACINTOSH TYPE, REUSABLE FIBER OPTICAL (SIZES 2 AND 3).
A12
WITH A MILLER TYPE (STRAIGHT), REUSABLE FIBER OPTIC BLADE FOR PEDIATRIC PATIENTS (SIZE 1).
A13
WITH TWO BLADES OF DIFFERENT SIZES FOR MILLER TYPE PEDIATRIC PATIENTS, REUSABLE FIBER OPTICAL (SIZES 1 AND 2).
CODE:
EQUIPMENT NAME: FETAL STIMULATOR
D-322
FUNCTIONAL UNIT (SERVICE): OBSTETRICS
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL CHARACTERISTICS
A01 acoustic fetal stimulator.
A02 portable equipment
A03 with vibroacoustic system.
A04 With ergonomic design for better handling.
A05 with interface connection for phono detector.
A06 with use of AA batteries. and/or with connecting cable to the equipment
A07 with 1/8" output compatible with various fetal monitors.
b ENERGY REQUIREMENT
B01 with rechargeable battery(s)
B02 with battery charger
SMALL BENCHES: WOODEN, WITH A HOLE IN THE CENTER SO THAT THE CHILD CAN GRAB IT AND MOVE IT WHERE THEY WANT WITH
A15
GREATER SAFETY. APPROXIMATE MEASUREMENT: 20 cm HEIGHT AND 20 X 20 cm WIDTH.
LONG BENCHES: MADE OF RESISTANT MATERIAL SUCH AS WOOD, METAL OR HARD PLASTIC. APPROXIMATELY 50 cm long x 20 cm wide x
A16
20 cm high
TABLES: STABLE, SAFE AND WITH ENOUGH WEIGHT SO THAT IT DOES NOT TURN OVER EASILY. MEASUREMENTS: APPROXIMATELY 50 cm
A17
HIGH, WITH A COUNTER OF 60 cm X 60 cm
PIKLER FOLDER FOR EATING: IT IS AN INDIVIDUAL BENCH THAT GIVES SECURITY, FREEDOM OF MOVEMENT AND HELP THE CHILD
A18 ORGANIZE THE POSTURE FOR EATING. MEASUREMENTS: 70 cm LONG X 60 cm WIDTH AND A HEIGHT OF 40 cm. THE BENCH WHERE THE
CHILD SITTS IS 18 cm WIDE WITH A HEIGHT OF 15 cm. THE ENTRANCE TO THE FOLDER IS APPROXIMATELY 20 cm AT ITS WIDEST PART.
MODULES: MADE OF SOFT FABRIC AND DIFFERENT COLORS. THEY ARE CUBES, TRIANGLES AND/OR RECTANGLES OF FABRIC WITH FOAM
A19
INSIDE, APPROXIMATELY 5 to 10 cm.
BUCKETS: PLASTIC, SMALL AND LIGHT, WITH SOFT EDGES THAT DO NOT SCRATCH. OF VARIOUS COLORS AND SIZES. MAXIMUM
TO 20
MEASUREMENT: APPROXIMATELY 25 cm HIGH X 15 cm MOUTH DIAMETER
SPOOLS: 10 cm LONG X 10 cm DIAMETER, APPROXIMATELY MADE OF WOOD OR OTHER MATERIAL, HAVING THE ESSENTIAL FEATURE OF
A21
SMOOTH AND SAFE.
A22 HATS: OF DIFFERENT TYPES, SHAPES AND TEXTURES, PREFERRED BY THE PLACE.
TOYS TO STRING: SIMILAR TO THE PHOTO, WITH RINGS THAT THREAD ON A SHAFT. THEY MAY BE MADE OF WOOD OR PLASTIC. THE
A25
HOOPS CAN BE APPROXIMATELY 10 cm IN DIAMETER.
OBJECTS THAT MOVE: CARS, TRUCKS, PLANES, ETC, MAY BE MADE OF WOOD OR PLASTIC 10 TO 20 cm LONG X 2 or 3 cm WIDTH OF THE
A26
CENTRAL BODY.
CODE:
D-343 EQUIPMENT NAME: INFANTOMETER
FUNCTIONAL UNIT (SERVICE): EXTERNAL CONSULTATION
MINIMUM TECHNICAL REQUIREMENTS
A01 to measure the height of infants and young children
A02 abs plastic material
A03 with an integrated head stop and a separate foot stop.
which glides smoothly and precisely on a slightly raised guide
A04
rail system.
A05 Measuring range: 10-90cm or greater range
A06 division: 1mm
A07 weight: less than or equal to 2 kg
A02 BASE OF THE EQUIPMENT SOLID AND STABLE WITH ADJUSTMENT OF LEVEL
WIDE PLATFORM METALLIC WITH PROTECTION ANTIOXIDANT AND COATING EPOXY AND
A03
SURFACE OF RUBBER ANTI-SLIP.
A04 READING OF THE WEIGHT EXPRESSED IN KILOS
A05 WITH SCREEN SIMPLE EITHER DOUBLE
A06 FUNCTION TARE, CAR- HOLD AND DISCONNECTION AUTOMATIC
b PARAMETERS OF OPERATION I MEASUREMENT
B01 RANGE OF WEIGHING OF EITHER TO 20O KG. EITHER FURTHER.
B02 WITH ADJUSTMENT AND CALIBRATION AUTOMATIC
c REQUEST OF ENERGY
C01 FOUNTAIN OF SUPPLY ELECTRIC GUY BATTERY RECHARGEABLE, WITH CHARGER EXTERNAL.
C02 VOLTAGE OF FEEDING OF 100 TO 240 VAC, 60 HZ.
CODE:
EQUIPMENT NAME: CLAP OBSTETRIC TAPE
D-413
FUNCTION UNIT: OBSTETRICS OFFICE
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL CHARACTERISTICS
A01 measuring tape to measure uterine height during pregnancy
A02 It consists of two sides: front (white) and back (yellow)
Measuring tape of approximately 50 cm with divisions of half
A03
a cm.
reverse: contains patterns of uterine height, maternal weight gain, estimated fetal weight, uterine contractions per hour, according to
A04
gestational age
A05 tape in synthetic material, inextensible and washable.
CODE:
EQUIPMENT NAME: LIGHT CURING LAMP
D-449
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL CHARACTERISTICS
TABLETOP EQUIPMENT, FOR PHOTOPOLYMERIZATION
PROCEDURES OF RESIN AND SIMILAR COMPOUNDS IN THE
A01 DENTAL OBTURATION PHASE, USED FOR RESTORATION OF
TEETH, SOLIDIFICATION OF LIGHT-SENSITIVE RESINS AND FOR
THE WHITENING ACCELERATOR
CODE:
EQUIPMENT NAME: 4 P3 REFRIGERATOR.
E-159
MINIMUM TECHNICAL REQUIREMENT
TO GENERAL
A01 Frost-free refrigerator type
A02 4 cubic foot capacity ±10%
A03 Temperature control type: digital
A04 interior light
Includes (01) Datalogger unit (electronic device that records
A05 data over time. Temperature and pressure parameters
through sensors).
A06 Energy efficiency A
A07 lock on door
A08 Adjustable tempered glass trays
A09 white color
A10 Adjustable
A11 legs
Minimum 04 tempered glass trays
A12 Approximate dimensions ±5cm Height:82cm Width:49cm Depth:52cm
c ENERGY REQUIREMENT
C01 220V̴60HZ AC (TOLERANCE ACCORDING TO NATIONAL ELECTRICAL CODE)
C02 PROVIDED IN RM N° 175-2008-MEM
CODE:
EQUIPMENT NAME: DATA LOGGER
E-160
MINIMUM TECHNICAL REQUIREMENT
TO GENERAL
The temperature data logger allows faster access to data
A01
collected in any cold chain management process.
A02 Robust and compact design
Records real-time temperature that is stored in non-volatile
A03
memory for access via USB port
TEMPERATURE MEASUREMENT RANGE
A04 Internal sensor: -30°C ~ +70°C External sensor: -40°C ~ +85°C
A05 Software: PDF/XLS/TXT
A06 replaceable battery
A07 Waterproof protection
c ENERGY REQUIREMENT
C01 220V̴60HZ AC (TOLERANCE ACCORDING TO NATIONAL ELECTRICAL CODE)
C02 INCLUDE BATTERIES
CODE:
E-161 EQUIPMENT NAME: CODE BAR SCANNER
CODE :
E-162 EQUIPMENT NAME: ELECTRIC HAND DRYER
CODE:E- EQUIPMENT NAME: THERMOMETER FOR
191 VACCINE HOLDER
FUNCTION UNIT: COLD CHAIN
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL CHARACTERISTICS
A01 digital display screen
A02 Sample measurement values from -20°c to 50°c or larger
A03 resolution 0.1 °c with greater precision
A04 wall equipment
b POWER SOURCE
B01 batteries or batteryincludedlong lasting
CODE:
EQUIPMENT NAME: BAG SEALING MACHINE
E-2
MINIMUM TECHNICAL REQUIREMENT
TO GENERAL
electrical desktop equipment used to seal plastic bags of
A01
surgical instruments and other medical devices
A02 constructed of stainless steel
A03 digital display screen
A04 with integrated printer
A05 adjustable temperature
A06 automatic standby for energy saving
A07 with USB or RS232 communication port
b ACCESSORIES
B01 Roll holder for sleeves and/or rolls of different sizes with built-in guillotine.
B02 roller conveyor of the same brand of the bag sealer
c ENERGY REQUIREMENT
C01 power cable with 250 v 16 a schuko grounded plug (must comply with rm no. 175-2008-mem/dm).
C02 220vac or 230vac / 60hz
CODE:
WASHER DISINFECTOR
E-208
TECHNICAL SPECIFICATIONS
DEFINITION OF TEAM
TABLETOP OR FLOOR EQUIPMENT FOR COMPLETE CLEANING OF
SURGICAL INSTRUMENTS, ALLOWING TO ELIMINATE THE DIRT PARTICLES
LODGE IN THE INSTRUMENTS; LIKE BLOOD, PROTEINS AND OTHERS.
MINIMUM TECHNICAL
TO GENERAL
A01. TABLETOP OR FLOOR TYPE
A02. STAINLESS STEEL TANK (WHICH ALLOWS INSTRUMENTS TO ENTER)
A03. HEATER WITH OVER TEMPERATURE PROTECTION
A04. WATER DEGASSIFIER
A05. DRAIN OUTLET WITH DISCHARGE VALVE. MUST INCLUDE BASIC HOSE
A06. USEFUL CHAMBER VOLUME: APPROXIMATELY 20 LITERS±10%
A07. TIME REGULATION
A08. TEMPERATURE REGULATION
A09. CONTROLLED BY MICROPROCESSOR
A10. DIGITAL TEMPRATURE INDICATOR
b ACCESSORIES
B01. TWO (02) BASKETS FOR INSTRUMENTS
B02. ONE (01) BUCKET (NOT PERFORATED) ADAPTABLE TO THE BASKET
B03. DRAIN HOSE
B04. TANK LID
c ELECTRIC POWER
C01. SUPPLY VOLTAGE 220V AC/ 60 HZ
STERILIZABLE ALUMINUM CONTAINER WITH PERMANENT FILTER SYSTEM WITH MAINTENANCE-FREE BARRIER SYSTEM OF 285 X 280 X 100 MM WITH
B01
PERFORATED STEEL SHEET BASKET.
B02 ONE (01) SET OF DOYEN VAGINAL VALVES, SLIGHTLY CONCAVE, ONE MEDIUM 85X45MM, AND ANOTHER LARGE 115X45MM 24CM.
B03 ONE (01) SET OF VAGINAL VALVES GIVE. SLIGHTLY CONCAVE, ONE MEDIUM 85X35 AND ANOTHER LARGE 115X35MM 24CM.
B04 TWO (02) STRAIGHT FOERSTER TWEEZERS 25 CM.
B05 TWO (02) CURVED FOERSTER TWEEZERS 25 CM.
B06 TWO (02) TEALE CERVICAL FORPS, CURVED (23 CM)
B07 ONE (01) DISSECTION CLIPS WITHOUT TEETH 20CM.
B08 ONE (01) MAY HEGAR NEEDLE HOLDER 18CM.
B09 ONE (01) STRAIGHT MAY SCISSORS 23CM.
A03 (01) support for the drainer, removable, 300 mm in diameter. Made with ø5/16 round section bar.
(02) fixed trays, made of 1.2 mm thick sheet metal, and have a 45 mm high raised edge throughout, to be able to place
A04
cleaning implements.
A05 (04) broom support ring, which are arranged (02) in the upper tray and the others in the lower tray. Made with 1.2 mm thick plate.
A06 The joints will be joined with arc welding with a tungsten electrode and gas protection (tig).
b ACCESSORIES
(01 unit) stainless steel bucket made of surgical-type stainless steel plate, quality 304-2b, 1.0 mm thick; without seams or rivets and with a
B01
semicircle-shaped handle. with an approximate capacity of 18 liters.
(01 unit) canvas bag, with capacity to place a 140lt plastic bag, made with ecru-colored canvas, with a rectangular mouth. This is installed
B02
on the hooks arranged on the upper ring.
c APPROXIMATE DIMENSIONS
C01 total length: 1000 mm
C02 total width: 560mm
C03 total height: 970mm
d FINISHES
D01 stainless steel components must be quality 304, finish 2b
A04 Made with (02) ø1" x 1.2 mm thick stainless steel arches and crossbars. with (04) ø3" hospital grade pulleys, 360° rotating, (02) with brake.
310 mm inner diameter, manufactured with a 32 x 3 mm stainless steel plate, rolled and welded to the base in order to
A05 support the sink. The upper contour is covered with a protective rubber strip.
A06 All joints will be electrically welded with TIG type welding for stainless steel.
b APPROXIMATE DIMENSIONS
B01 total length: 800 mm
B02 total height: 850mm
c FINISHES
C01 stainless steel components must be quality 304, finish 2b
CODE:
EQUIPMENT NAME: MICROPOROUS FLOOR
M-136
FUNCTIONAL UNIT (SERVICE): EARLY STIMULATION
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL
A01 sheets in the shape of puzzle pieces
A02 washable material
A03 anti-allergic and non-toxic
A04 approximately 15mm thick.
A05 each piece approximately 60x60 cm
A06 Total covered area not less than 2m2
A07 zippered carrying bag
ONE (01) DRAWER AT THE BOTTOM PART OF THE TOP BOARD, EASY TO MOVE WITH TELESCOPIC TYPE METAL SLIDERS. THE DRAWERS
A03 WILL BE MADE WITH (1/32”) 0.8 mm THICK STAINLESS STEEL PLATE WITH 150 mm AND 3/8” THICK STAINLESS STEEL HANDLE HANDLE
MOUNTED ON FOUR (04) 2” DIAMETER SWIVEL CHROME METAL WHEELS WITH HARD RUBBER OR OTHER SIMILAR MATERIAL HIGHLY
RESISTANT TO TRANSIT, BILLED BEARING, CENTRAL AXLE THREADED TO THE LEGS OF THE TABLE AND TWO (02) OF THEM WILL GO WITH
A04 BRAKES .
b WELDING
ALL JOINTS OF THE FURNITURE MUST BE ELECTRICALLY WELDED BY ELECTRODE WELDING, OR EQUIVALENT TECHNOLOGY, WHICH
B01 GUARANTEES THE PERFECT UNION OF THE PARTS, WITH A UNIFORM FINISH WITHOUT CLUMPING.
c STAINLESS STEEL COMPONENTS
C01 THEY MUST COMPLY WITH THE AISI STANDARD, QUALITY 304 FINISH 2B.
d APPROXIMATE DIMENSIONS
D01 LENGTH: 900 MM.
D02 WIDTH: 450 MM.
D03 HEIGHT: 750 MM.
A04 The stainless steel must comply with AISI 304 standards and must be quality 304-2B stainless steel.
b APPROXIMATE DIMENSIONS
B01 Height: 2100 mm
B02 Width: 900mm
B03 Depth: 400mm
CODE:
EQUIPMENT NAME: STANDARD DESK
M-22
FUNCTIONAL UNIT (SERVICE) : ALL
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL
Constructed entirely of cold-rolled steel sheet 1 mm thick
with the exception of the melamine board. Consisting of a
A01 central drawer and a chest of three (03) drawers, two
standard and 1 filing type, sliding on full extension metal
slides.
General lock on the central drawer and on the side drawers
A02
with trap closure system.
Upper board made of 25mm thick chipboard, veneered with
laminated plastic (Formica) on both sides, with a thick 3mm
A03
thick PVC edge that protects the entire edge of the board and
with 60 mm cable gland.
with metal supports (legs) made of 1" x 2" tectangular
A04 section LAF steel tube and 1 mm thick LAF sheet steel
plywood panel. with pvc regulating skids.
A05 All joints will be electrically welded with mig welding or higher.
b APPROXIMATE DIMENSIONS
B01 length: 1150mm
B02 Width: 750mm
B03 height: 750 mm
SEAT CENTRAL SUPPORT, CONSTRUCTED WITH 1 ½” SQUARE SECTION TUBE, WITH INTERNAL THREAD FOR THE WORM TYPE SCREW AND
TO HOUSE A HELICAL LOCK NUT AS A STOP, MOUNTED ON FIVE (05) 1” EXTENDABLE METAL LEGS WITH A CIRCULAR SECTION DIAMETER
AND 1.2 MM. OF THICKNESS.
A02
LIFT SYSTEM BY MEANS OF THE ACME TYPE THREADED SHAFT TO REGULATE THE HEIGHT AND WITH A MECHANISM IN THE CENTRAL
SUPPORT OF THE CHAIR, WHICH ALLOWS THE SEAT TO TURN IN BOTH DIRECTIONS WITHOUT SUFFERING VARIATIONS IN THE PRE-
ESTABLISHED HEIGHT, THIS MOVEMENT MUST BE INDEPENDENT OF THE ONE PROVIDED BY THE WHEELS.
A03
THE EXTENDABLE LEGS WILL BE MOUNTED ON FIVE (05) 2” DIAMETER CHROME METAL WHEELS, WITH HARD RUBBER OR OTHER SIMILAR
MATERIAL, HIGHLY RESISTANT TO TRANSIT, THREADED CENTRAL AXLE AND BALL BEARING.
A04
A07 THE TREATMENT TO BE FOLLOWED FOR THE METAL PARTS WILL BE AS FOLLOWS:
b WELDING
ALL JOINTS OF THE FURNITURE MUST BE ELECTRICALLY WELDED BY ELECTRODE WELDING, OR EQUIVALENT TECHNOLOGY, WHICH
GUARANTEES THE PERFECT UNION OF THE PARTS, WITH A UNIFORM FINISH WITHOUT CLUSTERING.
B01
c PAINTED
ALL METAL PARTS OF COLD LAMINATED STEEL (LAF) WILL HAVE A TREATMENT: DEGREASING, DEOXIDIZED, PHOSPHATIZED AND
C01 DEHYDRATED.
C02 THE FINISH WILL BE ELECTROSTATIC PAINT, HYBRID TYPE WITH POLYESTER AND EPOXY RESIN.
C03 BAKED WILL BE AT A TEMPERATURE OF 150º.
THE ELECTROSTATIC PAINTED COATING WILL HAVE A HOMOGENEOUS FINISH OF HIGH
HARDNESS AND EXCELLENT CHEMICAL AND MECHANICAL RESISTANCE; WITH A
C04 THICKNESS BETWEEN 60 TO 80 MICRONS.
d APPROXIMATE DIMENSIONS ± 50MM
D01 SEAT DEPTH: 550 mm
D02 SEAT WIDTH: 600mm
D03 MINIMUM SEAT HEIGHT: 450 mm
D04 MAXIMUM SEAT HEIGHT WITH STOP: 600 mm
C04 (01 pair) standard leg, injected polyurethane (PU) leg, fastening strap made of 1” thick nylon tape, ø5/8” stainless steel mounting bar.
(01 unit) stainless steel tray, made of 1.2 mm thick stainless steel plate, measures 320 x 300 x 120 mm high. This tray slides
C05 over (02) channels that are welded to the bottom of the frame.
d APPROXIMATE DIMENSIONS
D01 total length: 1970 mm
D02 total width: 650mm
D03 total height: 680mm
AND FINISHES
E03 stainless steel components must be quality 304, finish 2b
CART SUPPORT, CONSTRUCTED BY FOUR (04) ROUND TUBE LEGS OF 1” DIAMETER AND 1.2 MM. THICK COLD LAMINATED STEEL.
A04
A05 300MM STAINLESS STEEL DRIVING HANDLE. IN LENGTH AND ½” IN DIAMETER.
LOWER PART COMPOSED OF TWO (02) DRAWERS WITH METAL SLIDERS FOR EASY SLIDING AND STAINLESS STEEL HANDLE HANDLES OF
A06 150 MM.LENGTH AND 3/8” DIAMETER.
MOUNTED ON FOUR (04) CHROME METAL WHEELS OF 3” DIAMETER, WITH HARD RUBBER OR OTHER SIMILAR MATERIAL HIGHLY
RESISTANT TO TRANSIT, CENTRAL AXLE THREADED TO THE LEGS OF THE TROLLEY, WITH BILLET BEARING, UNIDIRECTIONAL, TWO OF
A07 THEM WITH FOOT BRAKE .
TWENTY (20) 1/20” THICK ALUMINUM CLINICAL RECORD HOLDERS WITH HINGE SYSTEM, COMPLETELY ANODINED IN NATURAL COLOR,
POLISHED MATTE FINISH, ROUNDED CORNERS WITH FASTENING ELEMENTS FOR CLINICAL RECORD HOLDER CARTS SHOULD BE INCLUDED,
A08
STANDARDIZED ACCORDING TO THE CHARACTERISTICS OF THE MINSA, WITH APPROXIMATE DIMENSIONS OF 250XX 320MM. (FOR A-4
FORMATS).
ALL JOINTS OF THE FURNITURE MUST BE ELECTRICALLY WELDED BY ELECTRODE WELDING, OR EQUIVALENT TECHNOLOGY, WHICH
GUARANTEES THE PERFECT UNION OF THE PARTS, WITH A UNIFORM FINISH WITHOUT CLUMPING.
B01
c PAINTED
ALL METAL PARTS OF COLD LAMINATED STEEL (LAF) WILL HAVE A TREATMENT: DEGREASING, DEOXIDIZED, PHOSPHATIZED AND
C01 DEHYDRATED.
C02 THE FINISH WILL BE ELECTROSTATIC PAINT, HYBRID TYPE WITH POLYESTER AND EPOXY RESIN.
MINIMUM TECHNICAL REQUIREMENTS
C03 BAKED WILL BE AT A TEMPERATURE OF 150º.
THE ELECTROSTATIC PAINTED COATING WILL HAVE A HOMOGENEOUS FINISH OF HIGH HARDNESS AND
EXCELLENT CHEMICAL AND MECHANICAL RESISTANCE; WITH A THICKNESS BETWEEN 60 TO 80
C04
MICRONS.
C05 THE STAINLESS STEEL COMPONENTS WILL BE OF AISI 304-2B QUALITY.
d APPROXIMATE DIMENSIONS±50MM
D01 LENGTH: 750 MM
D02 WIDTH: 350MM
D03 HEIGHT: 850 MM
C01 headboard, with a regulation system through (02) scissor-type hinges, which allow degrees between 0° to 45°. or higher
d APPROXIMATE DIMENSIONS
D01 length: 1950 mm
D02 Width: 650mm
D03 height: 650mm
CODE:
EQUIPMENT NAME: METAL NIGHT TABLE
M-96
FUNCTIONAL UNIT (SERVICE): VARIOUS
MINIMUM TECHNICAL REQUIREMENTS
TO GENERAL
A01 Structure made entirely of 1.0 mm thick LAF steel plate.
Metal upper board veneered with laminated plastic (Formica),
with a fillet made of stainless steel sheet, with a satin finish,
A02 0.6mm thick.
a smooth-gliding drawer, with a built-in handle, with a
A03 telescopic slide.
a cabinet with a fixed metal shelf. in the lower part with a
A04 hinged door and built-in stainless steel handle.
A05 The entire assembly supported on four PVC height regulating skids.
b APPROXIMATE DIMENSIONS
B01 Width: 480mm
B02 depth: 390 mm
B03 height: 810mm
c FINISHES
C01 stainless steel components must be quality 304, finish 2b
CODE:
T-6 NAME OF THE EQUIPMENT: STEREO